• There are no items in your cart

EN 15316-4-1:2017

Current
Current

The latest, up-to-date edition.

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
Published date

05-17-2017

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Description of the method
6 Generation sub-system basic energy balance
Annex A (informative) - Additional formulas
        and default values for parametering the
        boiler efficiency method
Annex B (informative) - Additional formulas
        and default values for parametering the
        boiler efficiency method
Annex C (informative) - General part default
        values and information
Bibliography

This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems.This standard (EN 15316 4 1) specifies:-required inputs;-a calculation method;-resulting outputs;-a method to take into account the energy performance of heat generation devices based on fuel combustion;for space heating generation by combustion sub-systems (boilers, biomass), including control.This standard specifies methods for the calculation of:-thermal losses from the heating and the domestic hot water generation system;-recoverable thermal losses for space heating from the heating and the domestic hot water generation system;-auxiliary energy of the heating and the domestic hot water generation systems.This standard specifies the energy performance calculation of water based heat generation sub-systems including control based on combustion of fuels ("boilers"), operating with conventional fossil fuels as well as renewable fuels. This standard does not cover sizing or inspection of boilers.This standard is also applicable to heat generators for heating or for combined service as domestic hot water, ventilation, cooling and heating. Generators for domestic hot water only are taken into account into part M8-8.This European Standard is the general standard on generation by combustion sub-systems (boilers, biomass) and is also intended for generation for domestic hot water production and/or space heating. These values are input data for calculation of the overall energy use according to EN ISO 52000 1 and EN 15316 1.Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1.NOTE 1In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.NOTE 2The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

DevelopmentNote
Supersedes PREN 15316-4-1, EN 15316-4-7 and EN 15316-3-3. (05/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

BS EN 15316-4-7:2008 Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies Space heating generation systems, biomass combustion systems
BS EN 15316-4-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
15/30325699 DC : 0 BS EN ISO 52000-1 - ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1: GENERAL FRAMEWORK AND PROCEDURES
BS EN 15316-4-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3
14/30309963 DC : 0 BS EN 15316-4-3 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-3: HEAT GENERATION SYSTEMS, THERMAL SOLAR AND PHOTOVOLTAIC SYSTEMS
BS EN 15316-4-2:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2
I.S. EN 12831-3:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 3: DOMESTIC HOT WATER SYSTEMS HEAT LOAD AND CHARACTERISATION OF NEEDS, MODULE M8-2, M8-3
CEN/TR 15232-2:2016 Energy performance of buildings - Part 2: Accompanying TR prEN 15232-1:2015 - Modules M10-4,5,6,7,8,9,10
UNE-EN 15316-4-8:2011 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems
I.S. EN 15316-4-5:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-5: DISTRICT HEATING AND COOLING, MODULE M3-8-5, M4-8-5, M8-8-5, M11-8-5
I.S. EN ISO 52000-1:2017 ENERGY PERFORMANCE OF BUILDINGS - OVERARCHING EPB ASSESSMENT - PART 1 - GENERAL FRAMEWORK AND PROCEDURES (ISO 52000-1:2017)
UNI EN 15316-4-7 : 2009 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
EN 15316-4-2:2017/AC:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS, MODULE M3-8-2, M8-8-2
DIN EN 15232:2012-04 ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT
BS EN 303-2:2017 Heating boilers Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners
BS EN 15232:2012 Energy performance of buildings. Impact of Building Automation, Controls and Building Management
I.S. EN 303-2:2017 HEATING BOILERS - PART 2: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - SPECIAL REQUIREMENTS FOR BOILERS WITH ATOMIZING OIL BURNERS
EN 12831-3:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
EN 12831-1:2017 Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3
NF EN 15316-4-7 : 2009 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
BS EN 12831-1:2017 Energy performance of buildings. Method for calculation of the design heat load Space heating load, Module M3-3
DIN EN 12831-1 E : 2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3
DIN EN 15316-4-3:2007-10 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-3: HEAT GENERATION SYSTEMS, THERMAL SOLAR AND PHOTOVOLTAIC SYSTEMS, MODULE M3-8-3, M8-8-3, M11-8-3
ISO 13612-2:2014 Heating and cooling systems in buildings Method for calculation of the system performance and system design for heat pump systems Part 2: Energy calculation
ISO 13675:2013 Heating systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers)
PREN 303-2 : DRAFT 2016 HEATING BOILERS - PART 2: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - SPECIAL REQUIREMENTS FOR BOILERS WITH ATOMIZING OIL BURNERS
I.S. EN 12831-1:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3
PREN 15316-4-3 : DRAFT 2014 HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-3: HEAT GENERATION SYSTEMS, THERMAL SOLAR AND PHOTOVOLTAIC SYSTEMS
ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
UNE-EN 15316-4-2:2010 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems
DIN EN 303-2:2016-07 (Draft) HEATING BOILERS - PART 2: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - SPECIAL REQUIREMENTS FOR BOILERS WITH ATOMIZING OIL BURNERS
DIN EN 15232 E : 2012 ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT
UNE-EN 15232:2014 Energy performance of buildings - Impact of Building Automation, Controls and Building Management
DIN EN 15316-4-3:2017-09 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-3: HEAT GENERATION SYSTEMS, THERMAL SOLAR AND PHOTOVOLTAIC SYSTEMS, MODULE M3-8-3, M8-8-3, M11-8-3
DIN EN 12831-1:2017-09 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3
DIN EN 12831-3 E : 2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 3: DOMESTIC HOT WATER SYSTEMS HEAT LOAD AND CHARACTERISATION OF NEEDS, MODULE M8-2, M8-3
DIN EN 15316-4-7:2009-02 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
11/30244232 DC : DRAFT JUNE 2011 BS EN 15232 - ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT
S.R. CEN/TR 15232-2:2016 ENERGY PERFORMANCE OF BUILDINGS - PART 2: ACCOMPANYING TR PREN 15232-1:2015 - MODULES M10-4,5,6,7,8,9,10
CEN/TR 15615:2008 Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document
I.S. EN 15316-4-7:2008 HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS
EN 15316-4-5:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5
UNI EN 15232 : 2012 ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT
PD CEN/TR 15316-6-4:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1
PD CEN/TR 15232-2:2016 Energy performance of buildings Accompanying TR prEN 15232-1:2015. Modules M10-4,5,6,7,8,9,10
BS ISO 13612-2:2014 Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems Energy calculation
12/30245685 DC : 0 BS ISO 13612-2 - HEATING AND COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE SYSTEM PERFORMANCE AND SYSTEM DESIGN FOR HEAT PUMP SYSTEMS - PART 2: ENERGY CALCULATION
CEN/TR 15316-6-4:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1
EN 303-2:2017 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
EN 15316-4-3:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3
EN 15232:2012 Energy performance of buildings - Impact of Building Automation, Controls and Building Management
DIN EN 12831-3:2017-09 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 3: DOMESTIC HOT WATER SYSTEMS HEAT LOAD AND CHARACTERISATION OF NEEDS, MODULE M8-2, M8-3
DIN EN 15316-4-5:2007-10 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-5: DISTRICT HEATING AND COOLING, MODULE M3-8-5, M4-8-5, M8-8-5, M11-8-5
I.S. EN 15232:2012 ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT
I.S. EN 15316-4-3:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-3: HEAT GENERATION SYSTEMS, THERMAL SOLAR AND PHOTOVOLTAIC SYSTEMS, MODULE M3-8-3, M8-8-3, M11-8-3
16/30338102 DC : 0 BS EN 303-2 - HEATING BOILERS - PART 2: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - SPECIAL REQUIREMENTS FOR BOILERS WITH ATOMIZING OIL BURNERS
DIN EN 15316-4-2:2008-09 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS, MODULE M3-8-2, M8-8-2
PD CEN/TR 15615:2008 Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document
12/30239784 DC : 0 BS ISO 13675 - HEATING AND COOLING SYSTEMS IN BUILDINGS - METHOD AND DESIGN FOR CALCULATION OF THE SYSTEM ENERGY PERFORMANCE - COMBUSTION SYSTEMS (BOILERS)
BS ISO 13675:2013 Heating systems in buildings. Method and design for calculation of the system energy performance. Combustion systems (boilers)
BS EN 12831-3:2017 Energy performance of buildings. Method for calculation of the design heat load Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
S.R. CEN/TR 15316-6-4:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 6-4: EXPLANATION AND JUSTIFICATION OF EN 15316-4-1, MODULE M3-8-1, M8-8-1
UNE-EN 15316-4-7:2010 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems
I.S. EN 15316-4-2:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS, MODULE M3-8-2, M8-8-2
I.S. EN 15316-4-2:2017+AC:2017 ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-2: SPACE HEATING GENERATION SYSTEMS, HEAT PUMP SYSTEMS, MODULE M3-8-2, M8-8-2

EN 15316-3:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6
EN 303-6:2000 Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
ISO 9488:1999 Solar energy Vocabulary
EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
ISO 52000-1:2017 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
EN 13203-2:2015 Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4
EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements
EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN ISO 13790:2008 Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008)
EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
EN 303-2:2017 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
EN 303-3:1998/AC:2006 HEATING BOILERS - PART 3: GAS-FIRED CENTRAL HEATING BOILERS ASSEMBLY COMPRISING A BOILER BODY AND A FORCED DRAUGHT BURNER
EN ISO 9488:1999 Solar energy - Vocabulary (ISO 9488:1999)
EN 303-4:1999 Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
EN 15316-2:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5
EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
EN 303-7:2006 Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW
EN 15034:2006/AC:2008 HEATING BOILERS - CONDENSING HEATING BOILERS FOR FUEL OIL
EN 15502-2-1:2012+A1:2016 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
ISO 13790:2008 Energy performance of buildings Calculation of energy use for space heating and cooling
CEN/TR 15316-6-4:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1
EN 15035:2006 Heating boilers - Special requirements for oil fired room sealed units up to 70 kW
EN 15502-2-2:2014 Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.