EN 15345:2007
Current
Current
The latest, up-to-date edition.
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
Published date
12-05-2007
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Characteristics of PP recyclates
5 Quality Assurance
Annex A (Normative) - Test Method for the determination
of bulk density
Bibliography
This European Standard defines a method of specifying delivery conditions for Polypropylene (PP) recyclates.It gives the most important characteristics and associated test methods for assessing a single batch of PP recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PP to agree on specifications for specific and general applications.This standard does not cover the characterisation of plastics wastes. See EN 15347.This standard is applicable without prejudice to any existing legislation.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 15345 E : 2008 | Identical |
| NS EN 15345 : 1ED 2007 | Identical |
| I.S. EN 15345:2007 | Identical |
| UNE-EN 15345:2008 | Identical |
| PN EN 15345 : 2010 | Identical |
| NF EN 15345 : 2008 | Identical |
| DIN EN 15345:2008-02 | Identical |
| NBN EN 15345 : 2008 | Identical |
| NEN EN 15345 : 2007 | Identical |
| SN EN 15345 : 2008 | Identical |
| UNI EN 15345 : 2008 | Identical |
| BS EN 15345:2007 | Identical |
| 17/30339707 DC : 0 | BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A |
| UNI CEN/TS 16011 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| CEN Guide 4:2008 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| UNI EN 15343 : 2008 | PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT |
| 17/30339710 DC : 0 | BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B |
| 16/30314617 DC : 0 | BS ISO 19469-3 - PLASTIC PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE - SINGLE WALL CORRUGATED PIPING SYSTEMS OF POLYETHYLENE (PE), POLYPROPYLENE (PP) AND UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 3: PIPES AND FITTINGS FOR DEEP BURIAL INSTALLATIONS |
| 16/30317340 DC : 0 | BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL |
| PREN 14932 : DRAFT 2016 | PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL |
| DIN EN 13206:2015-09 (Draft) | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 15343 E : 2008 | PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT |
| PD CEN/TS 16011:2013 | Plastics. Recycled plastics. Sample preparation |
| 07/30161754 DC : 0 | BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
| PD CEN/TS 14541:2013 | Plastics pipes and fittings. Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
| CEN/TR 13688:2008 | Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling |
| EN 14932:2018 | Plastics - Thermoplastic stretch films for wrapping silage bales |
| BS EN 13206:2017 | Plastics. Thermoplastic covering films for use in agriculture and horticulture |
| DIN EN 15343:2008-02 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| DIN EN 13206:2017-05 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| PD CEN/TR 13688:2008 | Packaging. Material recycling. Report on requirements for substances and materials to prevent a sustained impediment to recycling |
| UNI CEN/TS 14541 : 2013 | PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS |
| ISO Guide 64:2008 | Guide for addressing environmental issues in product standards |
| ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
| S.R. CEN/TS 16011:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| I.S. EN 13206:2017 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| UNE-EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| UNE-CEN/TS 16011:2015 EX | Plastics - Recycled plastics - Sample preparation |
| CEN/TS 14541:2013 | Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| I.S. EN 14932:2018 | PLASTICS - THERMOPLASTIC STRETCH FILMS FOR WRAPPING SILAGE BALES |
| S.R. CEN/TR 13688:2008 | PACKAGING - MATERIAL RECYCLING - REPORT ON REQUIREMENTS FOR SUBSTANCES AND MATERIALS TO PREVENT A SUSTAINED IMPEDIMENT TO RECYCLING |
| 06/30136263 DC : DRAFT MAR 2006 | ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2 - PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE - TYPE A |
| 07/30156704 DC : DRAFT DEC 2007 | BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| S.R. CEN/TS 14541:2013 | PLASTICS PIPES AND FITTINGS - CHARACTERISTICS FOR UTILISATION OF NON-VIRGIN PVC-U, PP AND PE MATERIALS |
| BS EN 15343:2007 | Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content |
| CEN/TS 16011:2013 | Plastics - Recycled plastics - Sample preparation |
| EN ISO 1043-3 : 1999 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 3: PLASTICIZERS (ISO 1043-3:2016) |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| UNI 10853-2 : 2000 | RECYCLED PLASTIC MATERIALS FROM RECOVERY OF DURABLE GOODS TO END OF LIFE - POLYPROPYLENE - REQUIREMENTS AND TEST METHODS |
| EN ISO 180:2000/A2:2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013) |
| UNI 10667-3 : 2011 | PLASTIC RAW-SECONDARY MATERIALS - POLYPROPYLENE FOR GENERAL PURPOSES FROM THE RECYCLING OF INDUSTRIAL RESIDUES AND/OR FROM PRE AND/OR POST CONSUMER MATERIALS - PART 3: REQUIREMENTS AND TEST METHODS |
| CEN/TR 15353:2007 | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| EN ISO 1043-2:2011 | Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 1873-1:1995 | Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| EN ISO 3451-1:2008 | Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2008) |
| ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
| EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
| EN ISO 11469:2016 | Plastics - Generic identification and marking of plastics products (ISO 11469:2016) |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN ISO 1043-4:1999/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 4: FLAME RETARDANTS (ISO 1043-4:1998/AMD 1:2016) |
| ISO 472:2013 | Plastics Vocabulary |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 1043-3:2016 | Plastics Symbols and abbreviated terms Part 3: Plasticizers |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| EN ISO 179-2:1999/A1:2012 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - INSTRUMENTED IMPACT TEST (ISO 179-2:1997/AMD 1:2011) |
| EN ISO 1873-1 : 1995 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| ISO 1043-2:2011 | Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 1043-4:1998 | Plastics Symbols and abbreviated terms Part 4: Flame retardants |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| EN 12099:1997 | Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ASTM D 5577 : 1994 | Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.