• There are no items in your cart

EN 1559-3:2011

Current
Current

The latest, up-to-date edition.

Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
Published date

10-19-2011

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designations
6 Manufacture
7 Requirements
8 Inspection
9 Marking
10 Packaging and surface protection
11 Complaints
Annex A (informative) - Guidelines for the specification
        of acceptance criteria for the outer and inner
        conditions (non-destructive testing)
Annex B (informative) - Guidelines for the specification
        of acceptance criteria for surface condition
        (visual check)
Annex C (informative) - Significant technical changes
        between this European standard and the
        previous edition
Bibliography

This European Standard specifies the additional technical delivery conditions for castings made from all cast iron materials.This European Standard applies to iron castings produced in sand or permanent moulds or by centrifugal casting, continuous casting or investment casting.

Committee
CEN/TC 190
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
PN EN 1559-3 : 2012 Identical
UNE-EN 1559-3:2012 Identical
BS EN 1559-3:2011 Identical
NF EN 1559-3 : 2011 Identical
NBN EN 1559-3 : 2011 Identical
I.S. EN 1559-3:2011 Identical
NS EN 1559-3 : 2011 Identical
UNI EN 1559-3 : 2011 Identical
NEN EN 1559-3 : 2011 Identical
SN EN 1559-3 : 2012 Identical
DIN EN 1559-3:2012-01 Identical

UNE-EN 1563:2012 Founding - Spheroidal graphite cast irons
PREN 1564 : DRAFT 2009 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
09/30185939 DC : 0 BS EN 12513 - FOUNDING - ABRASION RESISTANT CAST IRONS
09/30200840 DC : 0 BS EN 1564 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRON
BS EN 1562:2012 Founding. Malleable cast irons
BS EN 1563:2011 Founding. Spheroidal graphite cast irons
I.S. EN 15776:2011 UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15%
I.S. EN 1563:2011 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
UNE-EN 15776:2011 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
BS EN 13835:2012 Founding. Austenitic cast irons
UNE-EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
UNE-EN 12513:2011 Founding - Abrasion resistant cast irons
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
DIN EN 1562:2012-05 FOUNDING - MALLEABLE CAST IRONS
EN 1370:2011 Founding - Examination of surface condition
EN 12513:2011 Founding - Abrasion resistant cast irons
UNI EN 16482 : 2014 FOUNDING - CONTINUOUS CAST IRON BARS
09/30200834 DC : 0 BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
UNI EN 1562 : 2012 FOUNDING - MALLEABLE CAST IRONS
DIN EN 16482:2014-09 FOUNDING - CONTINUOUS CAST IRON BARS
PREN 12513 : DRAFT 2009 FOUNDING - ABRASION RESISTANT CAST IRONS
11/30249111 DC : 0 BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS EN 13445-6 : 2014 UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
I.S. EN 16124:2011 FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
EN 13445-6 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
DIN EN 15776:2016-01 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % (includes Amendment A1:2015)
I.S. EN 13445-6:2014 UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
15/30322070 DC : 0 BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
UNI EN 16124 : 2012 FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS
DIN EN 12516-4:2015-01 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN EN 1559-1:2011-05 Founding - Technical conditions of delivery - Part 1: General
DIN EN 12513:2011-05 Founding - Abrasion resistant cast irons
I.S. EN 13835:2012 FOUNDING - AUSTENITIC CAST IRONS
I.S. EN 1559-1:2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 1561:2011 FOUNDING - GREY CAST IRONS
I.S. EN 12513:2011 FOUNDING - ABRASION RESISTANT CAST IRONS
I.S. EN 1564:2011 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 1370:2011 FOUNDING - EXAMINATION OF SURFACE CONDITION
UNI EN 1370 : 2012 FOUNDING - EXAMINATION OF SURFACE CONDITION
UNE-EN 16482:2014 Founding - Continuous cast iron bars
DIN EN 1563:2015-07 (Draft) FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
BS EN 16079:2011 Founding. Compacted (vermicular) graphite cast irons
PREN 12516-4 : DRAFT 2011 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
PREN 1562 : DRAFT 2009 FOUNDING - MALLEABLE CAST IRONS
12/30267860 DC : 0 BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS
UNE-EN 13445-6:2015 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
I.S. EN 1562:2012 FOUNDING - MALLEABLE CAST IRONS
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN 1562:2012 Founding - Malleable cast irons
DIN EN 1564:2012-01 Founding - Ausferritic spheroidal graphite cast irons
EN 1561:2011 Founding - Grey cast irons
UNE-EN 1564:2012 Founding - Ausferritic spheroidal graphite cast irons
UNI EN 12513 : 2011 Founding - Abrasion resistant cast irons
UNI EN 13835 : 2012 FOUNDING - AUSTENITIC CAST IRONS
UNI EN 1561 : 2011 FOUNDING - GREY CAST IRONS
UNI EN 1559-1 : 2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
UNI EN 1564 : 2011 FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS
DIN EN 16124:2012-02 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
13/30274230 DC : 0 BS EN 13445-6:2009/A1 - UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
UNI EN 16079 : 2012 FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
I.S. EN 12516-4:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS EN 16124:2011 Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
08/30176073 DC : DRAFT APR 2008 BS EN 15776 - UNFIRED PRESSURE VESSELS - ADDITIONAL REQUIREMENTS FOR THE DE SIGN AND FABRICATION OF PRESSURE VESSELS AND PARTS CONSTRUCTED FROM CAST IRON WITH ELONGATION EQUAL OR LESS THAN 15 PERCENT
DIN EN 16079:2012-02 Founding - Compacted (vermicular) graphite cast irons; German version EN 16079:2011
BS EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS EN 16482:2014 Founding. Continuous cast iron bars
09/30185942 DC : 0 BS EN 13835 - FOUNDING - AUSTENITIC CAST IRONS
UNI EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
UNI EN 1563 : 2012 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
UNE-EN 12516-4:2016 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
BS EN 15776 : 2011 UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15%
UNE-EN 1562:2012 Founding - Malleable cast irons
UNE-EN 16124:2012 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
DIN EN 1370:2012-03 FOUNDING - EXAMINATION OF SURFACE CONDITION
BS EN 1564:2011 Founding. Ausferritic spheroidal graphite cast irons
BS EN 12513:2011 Founding. Abrasion resistant cast irons
BS EN 1370:2011 Founding. Examination of surface condition
BS EN 1561:2011 Founding. Grey cast irons
UNE-EN 13835:2012 Founding - Austenitic cast irons
EN 15776:2011+A1:2015 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
EN 13835:2012 Founding - Austenitic cast irons
EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
EN 16124:2011 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 16482:2014 Founding - Continuous cast iron bars
EN 16079:2011 Founding - Compacted (vermicular) graphite cast irons
09/30187760 DC : DRAFT JULY 2009 BS EN 1562 - FOUNDING - MALLEABLE CAST IRONS
PREN 1563 : DRAFT 2015 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
UNE-EN 16079:2012 Founding - Compacted (vermicular) graphite cast irons
10/30227086 DC : DRAFT JUNE 2010 BS EN 16124 - FOUNDING - LOW ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRON FOR ELEVATED TEMPERATURE APPLICATIONS
DIN EN 15776 E : 2016 UNFIRED PRESSURE VESSELS - REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM CAST IRON WITH AN ELONGATION AFTER FRACTURE EQUAL OR LESS THAN 15%
DIN EN 16482:2014-09 FOUNDING - CONTINUOUS CAST IRON BARS
I.S. EN 16482:2014 FOUNDING - CONTINUOUS CAST IRON BARS
PREN 1559-1 : DRAFT 2009 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 16079:2011 FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS
DIN EN 1561:2012-01 Founding - Grey cast irons; German version EN 1561:2011
UNE-EN 1370:2012 Founding - Examination of surface condition
UNE-EN 1561:2012 Founding - Grey cast irons
DIN EN 13835:2012-04 FOUNDING - AUSTENITIC CAST IRONS

EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
EN 444:1994 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
ASTM E 689 : 2015 : REDLINE Standard Reference Radiographs for Ductile Iron Castings
PREN 1369 : DRAFT 2011 FOUNDING - MAGNETIC PARTICLE TESTING
ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ISO 15614-3:2008 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons
EN 16079:2011 Founding - Compacted (vermicular) graphite cast irons
EN 12513:2011 Founding - Abrasion resistant cast irons
EN 1562:2012 Founding - Malleable cast irons
EN 1560:2011 Founding - Designation system for cast iron - Material symbols and material numbers
EN 13835:2012 Founding - Austenitic cast irons
EN ISO 9934-1:2016 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
EN 1370:2011 Founding - Examination of surface condition
EN 16124:2011 Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
EN 1371-1:2011 Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 583-1:1998/A1:2003 NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - GENERAL PRINCIPLES
ISO 9934-1:2016 Non-destructive testing — Magnetic particle testing — Part 1: General principles
EN 12680-3:2011 Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN 14784-1:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems
EN 12681 : 2003 FOUNDING - RADIOGRAPHIC EXAMINATION
EN 13018:2016 NON-DESTRUCTIVE TESTING - VISUAL TESTING - GENERAL PRINCIPLES
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN ISO 15614-3:2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008)
EN 1561:2011 Founding - Grey cast irons

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.