EN 15663:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Railway applications - Vehicle reference masses
Superseded date
03-16-2022
Published date
07-05-2017
Publisher
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Derivation of vehicle reference masses
5 Consumables, staff and wear allowance
6 Standing area calculation
7 Payloads
Annex A (informative) - Densities
Annex B (informative) - Application standards
Annex C (informative) - Application of EN 15663:2009 reference
masses in TSI
Bibliography
This European Standard defines a set of reference masses for specifying the requirements for the design, testing, acceptance, marking, delivery and operation of rail vehicles.The reference masses defined in this document are as follows:-dead mass;-design mass in working order;-design mass under normal payload;-design mass under exceptional payload;-operational mass in working order;-operational mass under normal payload.These reference masses are defined with respect to the whole vehicle, but they can also apply to a specific system or component.The specification of values for tolerances applicable to reference masses is not in the scope of this standard. Tolerances can be required by an application standard.Additional loadings due to environmental factors, for example snow and retained or absorbed rainwater, are not in the scope of this European Standard.
| Committee |
CEN/TC 256
|
| DevelopmentNote |
Supersedes PREN 15663. (07/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DS EN 15663 : 2017 | Identical |
| DIN EN 15663:2017-09 | Identical |
| UNE-EN 15663:2018 | Identical |
| SS-EN 15663:2017 | Identical |
| UNI EN 15663:2019 | Identical |
| NF EN 15663 : 2017 | Identical |
| SN EN 15663 : 2017 | Identical |
| BS EN 15663:2009 | Identical |
| DIN EN 15663:2019-03 | Identical |
| ONORM EN 15663 : 2017 | Identical |
| PN EN 15663 : 2017 | Identical |
| DIN EN 15663 E : 2017 | Identical |
| NS EN 15663 : 2017 | Identical |
| I.S. EN 15663:2017 | Identical |
| DIN EN 15663:2015-11 (Draft) | Identical |
| UNI EN 15663 : 2009 | Identical |
| UNE-EN 15663:2010 | Identical |
| NEN EN 15663 : 2017 | Identical |
| NBN EN 15663 : 2009 COR 2010 | Identical |
| DIN EN 12663-1:2015-03 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) (includes Amendment A1:2014) |
| 17/30279844 DC : 0 | BS EN 17069-1 - RAILWAY APPLICATIONS - SYSTEMS AND PROCEDURES FOR CHANGE OF TRACK GAUGE - PART 1: AUTOMATIC VARIABLE GAUGE SYSTEMS |
| 15/30270276 DC : 0 | BS EN 13103-1 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PART 1: DESIGN GUIDE FOR AXLES WITH EXTERNAL JOURNALS |
| BS EN 15734-2:2010 | Railway applications. Braking systems of high speed trains Test methods |
| BS EN 16586-1:2017 | Railway applications. Design for PRM use. Accessibility of persons with reduced mobility to rolling stock Steps for access and egress |
| UNE-EN 45545-4:2013 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
| 10/30216933 DC : 0 | BS EN 50553 - RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| BS EN 15380-4:2013 | Railway applications. Classification system for railway vehicles Function groups |
| UNI EN 15380-4 : 2013 | RAILWAY APPLICATIONS - CLASSIFICATION SYSTEM FOR RAILWAY VEHICLES - PART 4: FUNCTION GROUPS |
| BS EN 16185-2:2014 | Railway applications. Braking systems of multiple unit trains Test methods |
| UNI EN 13749 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHODS OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIES FRAMES |
| DIN EN 15806:2011-01 | RAILWAY APPLICATIONS - BRAKING - STATIC BRAKE TESTING |
| BS EN 16286-1:2013 | Railway applications. Gangway systems between vehicles Main applications |
| PREN 14067-4 : DRAFT 2011 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
| UNE-EN 15877-2:2015 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
| BS EN 15273-2 : 2013 | RAILWAY APPLICATIONS - GAUGES - PART 2: ROLLING STOCK GAUGE |
| DIN EN 15827:2011-06 | Railway applications - Requirements for bogies and running gears |
| I.S. EN 12663-1:2010 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
| I.S. EN 12663-2:2010 | RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES - PART 2: FREIGHT WAGONS |
| BS EN 50553 : 2012 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| I.S. EN 15877-2:2013 | RAILWAY APPLICATIONS - MARKINGS OF RAILWAY VEHICLES - PART 2: EXTERNAL MARKINGS ON COACHES, MOTIVE POWER UNITS, LOCOMOTIVES AND ON TRACK MACHINES |
| I.S. EN 15827:2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| UNE-EN 15734-1:2011 | Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions |
| UNE-EN 16404:2016 | Railway applications - Re-railing and recovery requirements for railway vehicles |
| UNE-EN 16185-1:2015 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| UNE-EN 14363:2017 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| DIN EN 16586-1:2013-07 (Draft) | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - ACCESSIBILITY OF PERSONS WITH REDUCED MOBILITY TO ROLLING STOCK - PART 1: STEPS FOR ACCESS AND EGRESS |
| 16/30295407 DC : 0 | BS EN 15227 - RAILWAY APPLICATIONS - CRASHWORTHINESS REQUIREMENTS FOR RAILWAY VEHICLE BODIES |
| I.S. EN 15595:2009 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| NF EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| I.S. EN 14067-4:2013 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
| BS EN 12082:2017 | Railway applications. Axleboxes. Performance testing |
| CLC/TS 50591:2013 | Specification and verification of energy consumption for railway rolling stock |
| EN 12663-1:2010+A1:2014 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| EN 15528:2015 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
| DIN EN 16586-1:2017-07 | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - ACCESSIBILITY OF PERSONS WITH REDUCED MOBILITY TO ROLLING STOCK - PART 1: STEPS FOR ACCESS AND EGRESS |
| I.S. EN 14363:2016 | RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| CEI UNI EN 45545-4 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| I.S. EN 50553:2012 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| EN 16186-1:2014 | Railway applications - Driver's cab - Part 1: Anthropometric data and visibility |
| DIN EN 14531-2:2016-04 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
| 15/30295395 DC : 0 | BS EN 12082 - RAILWAY APPLICATIONS - AXLEBOXES - PERFORMANCE TESTING |
| DIN EN 14033-1:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| BS EN 45545-4:2013 | Railway applications. Fire protection on railway vehicles Fire safety requirements for rolling stock design |
| 10/30209452 DC : 0 | BS EN 16185-1 - RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| BS EN 16186-1 : 2014 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: ANTHROPOMETRIC DATA AND VISIBILITY |
| 11/30209536 DC : 0 | BS EN 14752 - RAILWAY APPLICATIONS - BODYSIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| BS EN 14363:2005 | Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Testing of running behavior and stationary tests |
| BS EN 16185-1:2014 | Railway applications. Braking systems of multiple unit trains Requirements and definitions |
| DIN EN 15380-4:2013-05 | RAILWAY APPLICATIONS - CLASSIFICATION SYSTEM FOR RAILWAY VEHICLES - PART 4: FUNCTION GROUPS |
| PREN 14531-2 : DRAFT 2012 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| BS EN 16404:2016 | Railway applications. Re-railing and recovery requirements for railway vehicles |
| I.S. EN 13749:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHOD OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIE FRAMES |
| UNI EN 14067-6 : 2010 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 6: REQUIREMENTS AND TEST PROCEDURES FOR CROSS WIND ASSESSMENT |
| 11/30239989 DC : 0 | BS EN 16251 - RAILWAY APPLICATION - ENVIRONMENTAL CONDITIONS - DESIGN AND TEST OF ROLLING STOCK UNDER SEVERE CONDITIONS |
| UNI EN 15806 : 2010 | RAILWAY APPLICATIONS - BRAKING - STATIC BRAKE TESTING |
| BS EN 14531-2:2015 | Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking Step by step calculations for train sets or single vehicles |
| 14/30270317 DC : 0 | BS EN 14198 - RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| 10/30209530 DC : 0 | BS EN 16186-1 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: VISIBILITY, LAYOUT, ACCESS |
| BS EN 13749:2011 | Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames |
| BS EN 14198 : 2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| 18/30332114 DC : 0 | BS EN 50591 - SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| UNI EN 12663-2 : 2010 | RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES - PART 2: FREIGHT WAGONS |
| I.S. EN 16185-1:2014 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| DIN EN 12663-2:2010-07 | Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
| PREN 14531-1 : DRAFT 2012 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| UNE-EN 12663-2:2011 | Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
| UNI EN 16286-1 : 2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 1: MAIN APPLICATIONS |
| NF EN 15734-1 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| I.S. EN 16185-2:2014 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 2: TEST METHODS |
| PREN 50553 : DRAFT 2010 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| I.S. EN 14033-1:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| I.S. EN 14198:2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| I.S. EN 15380-4:2013 | RAILWAY APPLICATIONS - CLASSIFICATION SYSTEM FOR RAILWAY VEHICLES - PART 4: FUNCTION GROUPS |
| I.S. EN 16286-1:2013 | RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 1: MAIN APPLICATIONS |
| UNE-EN 14531-2:2016 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles |
| NF EN 15734-2 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS |
| PREN 14198 : DRAFT 2014 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| DIN EN 15273-2:2014-06 | RAILWAY APPLICATIONS - GAUGES - PART 2: ROLLING STOCK GAUGE |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| BS EN 14067-4 : 2013 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| UNE-EN 16185-2:2015 | Railway applications - Braking systems of multiple unit trains - Part 2: Test methods |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| I.S. EN 14752:2015 | RAILWAY APPLICATIONS - BODY SIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| I.S. EN 12082:2017 | RAILWAY APPLICATIONS - AXLEBOXES - PERFORMANCE TESTING |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| PREN 15227 : DRAFT 2016 | RAILWAY APPLICATIONS - CRASHWORTHINESS REQUIREMENTS FOR RAILWAY VEHICLE BODIES |
| DIN EN 14067-6:2010-05 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 6: REQUIREMENTS AND TEST PROCEDURES FOR CROSS WIND ASSESSMENT |
| I.S. EN 16452:2015+A1:2019 | RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS |
| 12/30263252 DC : 0 | BS EN 14531-1 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| PREN 14067-6 : DRAFT 2016 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 6: REQUIREMENTS AND TEST PROCEDURES FOR CROSS WIND ASSESSMENT |
| UNI EN 15734-2 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS |
| BS EN 15806:2010 | Railway applications. Braking. Static brake testing |
| BS EN 15827:2011 | Railway applications. Requirements for bogies and running gears |
| 11/30247828 DC : 0 | BS EN 14067-4 - RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
| 14/30295389 DC : 0 | BS EN 14752 - RAILWAY APPLICATIONS - BODYSIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| UNE-EN 15528:2016 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
| DIN EN 15734-1:2013-09 | Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions (includes Corrigendum :2013) |
| I.S. EN 45545-4:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| 12/30235752 DC : 0 | BS EN 16404 - RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES |
| UNE-EN 15734-2:2011 | Railway applications - Braking systems of high speed trains - Part 2: Test methods |
| BS EN 14033-1:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running |
| 16/30208484 DC : 0 | BS EN 15654-2 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 2: TEST IN WORKSHOP FOR NEW, MODIFIED AND MAINTAINED VEHICLES |
| NF EN 12663-2 : 2010 | RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES - PART 2: FREIGHT WAGONS |
| PREN 17069-1 : DRAFT 2017 | RAILWAY APPLICATIONS - SYSTEMS AND PROCEDURES FOR CHANGE OF TRACK GAUGE - PART 1: AUTOMATIC VARIABLE GAUGE SYSTEMS |
| DIN EN 16185-2:2015-03 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 2: TEST METHODS |
| BS EN 14752:2015 | Railway applications. Body side entrance systems for rolling stock |
| I.S. EN 16586-1:2017 | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - ACCESSIBILITY OF PERSONS WITH REDUCED MOBILITY TO ROLLING STOCK - PART 1: STEPS FOR ACCESS AND EGRESS |
| BS EN 12663-1 : 2010 | RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES - PART 1: LOCOMOTIVES AND PASSENGER ROLLING STOCK (AND ALTERNATIVE METHOD FOR FREIGHT WAGONS) |
| I.S. EN 16186-1:2014 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: ANTHROPOMETRIC DATA AND VISIBILITY |
| I.S. EN 14531-2:2015 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 2: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
| I.S. EN 16404:2016 | RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES |
| EN 14067-6:2010 | Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment |
| PREN 50591 : DRAFT 2018 | SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
| PREN 14363 : DRAFT 2013 | RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
| DIN EN 14067-4:2014-05 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
| DIN EN 14752 E : 2015 | RAILWAY APPLICATIONS - BODY SIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| UNE-EN 13749:2012 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| UNE-EN 14067-4:2014 | Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track |
| DIN EN 14198:2017-03 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| UNI EN 14067-4 : 2013 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 4: REQUIREMENTS AND TEST PROCEDURES FOR AERODYNAMICS ON OPEN TRACK |
| UNI EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| I.S. EN 15734-2:2010 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS |
| 12/30156938 DC : 0 | BS EN 16452 - RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS |
| DIN EN 15734-2:2013-04 | Railway applications - Braking systems of high speed trains - Part 2: Test methods (includes Corrigendum :2012) |
| DIN EN 15528 E : 2016 | RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE |
| I.S. EN 15806:2010 | RAILWAY APPLICATIONS - BRAKING - STATIC BRAKE TESTING |
| DIN EN 16586-1 E : 2017 | RAILWAY APPLICATIONS - DESIGN FOR PRM USE - ACCESSIBILITY OF PERSONS WITH REDUCED MOBILITY TO ROLLING STOCK - PART 1: STEPS FOR ACCESS AND EGRESS |
| DIN EN 13749:2011-06 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| DIN EN 15877-2:2014-04 | RAILWAY APPLICATIONS - MARKINGS OF RAILWAY VEHICLES - PART 2: EXTERNAL MARKINGS ON COACHES, MOTIVE POWER UNITS, LOCOMOTIVES AND ON TRACK MACHINES |
| DIN EN 16452 E : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS |
| DIN EN 16404:2016-05 | RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES |
| DIN EN 15528:2016-01 | Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
| PREN 16404 : DRAFT 2015 | RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES |
| NF EN 15806 : 2010 | RAILWAY APPLICATIONS - BRAKING - STATIC BRAKE TESTING |
| BS EN 15734-1:2010 | Railway applications. Braking systems of high speed trains Requirements and definitions |
| DIN EN 45545-4:2015-11 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| EN 12082:2017 | Railway applications - Axleboxes - Performance testing |
| 17/30344378 DC : 0 | BS EN 16186-4 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 4: LAYOUT AND ACCESS |
| UNE-EN 16186-1:2015 | Railway applications - Driver's cab - Part 1: Anthropometric data and visibility |
| 16/30241388 DC : 0 | BS EN 17065 - RAILWAY APPLICATIONS - BRAKING - PASSENGER COACH TEST PROCEDURE |
| BS EN 15528:2015 | Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure |
| S.R. CLC/TS 50591:2013 | SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| I.S. EN 15273-2:2013 | RAILWAY APPLICATIONS - GAUGES - PART 2: ROLLING STOCK GAUGE |
| BS EN 16452:2015+A1:2019 | Railway applications. Braking. Brake blocks |
| DIN EN 14198:2015-01 (Draft) | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| I.S. EN 14067-6:2010 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 6: REQUIREMENTS AND TEST PROCEDURES FOR CROSS WIND ASSESSMENT |
| PREN 15528 : DRAFT 2013 | RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE |
| UNE-EN 16586-1:2018 | Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress |
| 16/30326116 DC : 0 | BS EN 14067-6 - RAILWAY APPLICATIONS - AERODYNAMICS - PART 6: REQUIREMENTS AND TEST PROCEDURES FOR CROSS WIND ASSESSMENT |
| DIN EN 14531-1:2016-05 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| 15/30270320 DC : 0 | BS EN 15595 - RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| NF EN 14067-6 : 2010 | RAILWAY APPLICATIONS - AERODYNAMICS - PART 6: REQUIREMENTS AND TEST PROCEDURES FOR CROSS WIND ASSESSMENT |
| BS EN 14067-6:2010 | Railway applications. Aerodynamics Requirements and test procedures for cross wind assessment |
| EN 16452:2015 | Railway applications - Braking - Brake blocks |
| PREN 17065 : DRAFT 2016 | RAILWAY APPLICATIONS - BRAKING - PASSENGER COACH TEST PROCEDURE |
| I.S. EN 15528:2015 | RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE |
| DIN EN 14752:2015-05 | RAILWAY APPLICATIONS - BODY SIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| UNE-EN 14752:2015 | Railway applications - Body side entrance systems for rolling stock |
| UNE-EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| EN 16586-1:2017 | Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress |
| EN 15380-4:2013 | Railway applications - Classification system for railway vehicles - Part 4: Function groups |
| EN 14531-2:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles |
| EN 15273-2:2013+A1:2016 | Railway applications - Gauges - Part 2: Rolling stock gauge |
| EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| EN 16404:2016 | Railway applications - Re-railing and recovery requirements for railway vehicles |
| EN 16185-2:2014 | Railway applications - Braking systems of multiple unit trains - Part 2: Test methods |
| EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
| EN 15877-2:2013 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
| EN 14067-4:2013 | Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track |
| EN 16286-1:2013 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| EN 15806:2010 | Railway applications - Braking - Static brake testing |
| DIN EN 16404 E : 2016 | RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES |
| DIN EN 16186-1:2015-03 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: ANTHROPOMETRIC DATA AND VISIBILITY |
| UNE-EN 12663-1:2011 | Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
| UNI CEI EN 45545-4 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| 12/30241406 DC : 0 | BS EN 15273-2 - RAILWAY APPLICATIONS - GAUGES - ROLLING STOCK GAUGE |
| 12/30250646 DC : 0 | BS EN 14531-2 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| 13/30270305 DC : 0 | BS EN 15528 - RAILWAY APPLICATIONS - LINE CATEGORIES FOR MANAGING THE INTERFACE BETWEEN LOAD LIMITS OF VEHICLES AND INFRASTRUCTURE |
| I.S. EN 15734-1:2010 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| BS EN 15877-2:2013 | Railway applications. Markings of railway vehicles External markings on coaches, motive power units, locomotives and on track machines |
| 13/30250658 DC : 0 | BS EN 14363 - RAILWAY APPLICATIONS - TESTING AND SIMULATION FOR THE ACCEPTANCE OF RUNNING CHARACTERISTICS OF RAILWAY VEHICLES - RUNNING BEHAVIOUR AND STATIONARY TESTS |
| PD CLC/TS 50591:2013 | Specification and verification of energy consumption for railway rolling stock |
| DIN EN 15806 E : 2011 | RAILWAY APPLICATIONS - BRAKING - STATIC BRAKE TESTING |
| DIN EN 14531-2 E : 2016 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
| DIN EN 16286-1:2013-06 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| I.S. EN 14531-1:2015 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| 15/30317558 DC : 0 | BS EN 16404 - RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES |
| BS EN 12663-2:2010 | Railway applications. Structural requirements of railway vehicle bodies Freight wagons |
| PREN 15595 : DRAFT 2015 | RAILWAY APPLICATIONS - BRAKING - WHEEL SLIDE PROTECTION |
| UNE-EN 16452:2016 | Railway applications - Braking - Brake blocks |
| UNI EN 15877-2 : 2013 | RAILWAY APPLICATIONS - MARKINGS OF RAILWAY VEHICLES - PART 2: EXTERNAL MARKINGS ON COACHES, MOTIVE POWER UNITS, LOCOMOTIVES AND ON TRACK MACHINES |
| BS EN 14531-1 : 2015 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
| UNE-EN 16286-1:2014 | Railway applications - Gangway systems between vehicles - Part 1: Main applications |
| CEI CLC/TS 50591 : 2014 | SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| 15/30241391 DC : 0 | BS EN 16834 - RAILWAY APPLICATIONS - BRAKING - BRAKE PERFORMANCE |
| UNI EN 15734-1 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| NF EN 13749 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHOD OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIE FRAMES |
| EN 50553 : 2012 AMD 1 2016 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| EN 15734-1:2010/AC:2013 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| DIN EN 16185-1:2015-03 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| EN 12663-2:2010 | Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
| EN 14752:2015 | Railway applications - Body side entrance systems for rolling stock |
| DIN EN 14033-1:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| EN 45545-4:2013 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
| EN 14363:2016 | Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests |
| DIN EN 16452:2015-11 | RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS |
| EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| EN 15734-2:2010/AC:2012 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 2: TEST METHODS |
| UNE-EN 15273-2:2013 | Railway applications - Gauges - Part 2: Rolling stock gauge |
| EN 15273-3:2013+A1:2016 | Railway applications - Gauges - Part 3: Structure gauges |
| UIC 566 : 1990 AMD 1 | LOADINGS OF COACH BODIES AND THEIR COMPONENTS |
| EN 14067-5:2006+A1:2010 | Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels |
| EN 16286-2:2013 | Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements |
| DIN 25008:2005-10 | Railway vehicles - Principles for the determination of vehicle weights - Terms and definitions, symbols, values |
| EN 15273-1:2013+A1:2016/AC:2017 | RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK |
| EN 14750-2 : 2006 | RAILWAY APPLICATIONS - AIR CONDITIONING FOR URBAN AND SUBURBAN ROLLING STOCK - PART 2: TYPE TESTS |
| CEN/TS 13979-2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels |
| EN 14067-1:2003 | Railway applications - Aerodynamics - Part 1: Symbols and units |
| EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
| CEN/TR 16251:2016 | Railway applications - Environmental conditions - Design guidance for rolling stock |
| EN 14067-3:2003 | Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels |
| EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
| EN 13979-1:2003+A2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
| PREN 15654-1 : DRAFT 2015 | RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 1: INTEROPERABLE ON-TRACK MEASUREMENT SITES FOR VEHICLES IN SERVICE |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.