EN 16601-00-01:2015
Current
Current
The latest, up-to-date edition.
Space systems - Glossary of terms
Published date
01-28-2015
Publisher
Foreword
1 Scope
2 Terms, definitions and abbreviated terms
Annex A - Traceability with respect to ECSS-P-001B
Annex B - Segment trees
Annex C - Launch segment-specific terms
Bibliography
This document controls the definition of all common terms used in the European Cooperation for Space Standardization (ECSS) Standards System. Terms specific to a particular ECSS Standard are defined in that standard.This document does not include the definition of terms used with their common meaning. In this case, the definition from the Oxford English Dictionary applies.
| Committee |
CEN/CLC/JTC 5
|
| DevelopmentNote |
Supersedes EN 13701. (02/2015) Supersedes UNE EN 13701. (03/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 16601-00-01 : 2016 | Identical |
| I.S. EN 16601-00-01:2015 | Identical |
| NBN EN 16601-00-01 : 2015 | Identical |
| UNI CEI EN 16601-00-01 : 2015 | Identical |
| UNE-EN 16601-00-01:2015 | Identical |
| BS EN 16601-00-01:2015 | Identical |
| PN EN 16601-00-01 : 2015 | Identical |
| SN EN 16601-00-01:2015 | Identical |
| DIN EN 16601-00-01:2015-05 | Identical |
| CEI UNI EN 16601-00-01 : 1ED 2016 | Identical |
| NEN EN 16601-00-01 : 2015 | Identical |
| NS EN 16601-00-01 : 2015 | Identical |
| I.S. EN 16603-50-14:2014 | SPACE ENGINEERING - SPACECRAFT DISCRETE INTERFACES |
| BS EN 16602-70-21:2014 | Space product assurance. Flammability testing for the screening of space materials |
| BS EN 16603-10-11:2014 | Space engineering. Human factors engineering |
| BS EN 16602-30-02:2014 | Space product assurance. Failure modes, effects (and criticality) analysis (FMEA/FMECA) |
| BS EN 16602-60-15:2014 | Space product assurance. Radiation hardness assurance. EEE components |
| BS EN 16602-70-55:2015 | Space product assurance. Microbiological examination of flight hardware and cleanrooms |
| BS EN 16603-10-06:2014 | Space engineering Technical requirements specification |
| BS EN 16603-60-30:2015 | Space engineering. Satellite AOCS requirements |
| I.S. EN 16602-60-13:2015 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR THE USE OF COTS COMPONENTS |
| BS EN 16603-50-51:2014 | Space engineering. SpaceWire protocol identification |
| I.S. EN 16603-32-01:2014 | SPACE ENGINEERING - FRACTURE CONTROL |
| I.S. EN 16602-40:2018 | SPACE PRODUCT ASSURANCE - SAFETY |
| DIN EN 16601-80:2014-12 | SPACE PROJECT MANAGEMENT - PART 80: RISK MANAGEMENT |
| BS EN 16603-50-03:2014 | Space engineering. Space data links. Telemetry transfer frame protocol |
| BS EN 16602-60-14:2014 | Space product assurance. Relifing procedure. EEE components |
| BS EN 16602-70-08:2015 | Space product assurance. Manual soldering of high-reliability electrical connections |
| BS EN 16602-70-09:2015 | Space product assurance. Measurements of thermo-optical properties of thermal control materials |
| BS EN 16603-35:2014 | Space engineering. Propulsion general requirements |
| BS EN 16602-70-18:2014 | Space product assurance. Preparation, assembly and mounting of RF coaxial cables |
| BS EN 16602-70-02:2014 | Space product assurance. Thermal vacuum outgassing test for the screening of space materials |
| BS EN 16602-70-06:2014 | Space product assurance. Particle and UV radiation testing for space materials |
| BS EN 16603-50-15:2017 | Space engineering. CANbus extention protocol |
| I.S. EN 16603-50-53:2015 | SPACE ENGINEERING - SPACEWIRE - CCSDS PACKET TRANSFER PROTOCOL |
| BS EN 16602-30-09:2014 | Space product assurance. Availability analysis |
| BS EN 16603-70-01:2015 | Space engineering. On-board control procedures |
| BS EN 16602-20:2014 | Space product assurance. Quality assurance |
| BS EN 16603-50-53:2015 | Space engineering. SpaceWire. CCSDS packet transfer protocol |
| BS EN 16602-70-56:2015 | Space product assurance. Vapour Phase Bioburden Reduction for Flight Hardware |
| I.S. EN 16602-70-02:2014 | SPACE PRODUCT ASSURANCE - THERMAL VACUUM OUTGASSING TEST FOR THE SCREENING OF SPACE MATERIALS |
| I.S. EN 16602-70-20:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF SILVER-PLATED COPPER WIRE AND CABLE TO 'RED-PLAGUE' CORROSION |
| I.S. EN 16602-20-07:2016 | SPACE PRODUCT ASSURANCE - QUALITY AND SAFETY ASSURANCE FOR SPACE TEST CENTRES |
| PREN 9223-100 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 100: A GUIDE FOR THE APPLICATION OF THE PRINCIPLES OF CONFIGURATION MANAGEMENT |
| I.S. EN 16602-60:2015 | SPACE PRODUCT ASSURANCE - ELECTRICAL, ELECTRONIC AND ELECTROMECHANICAL (EEE) COMPONENTS |
| I.S. EN 16602-70-58:2015 | SPACE PRODUCT ASSURANCE - BIOBURDEN CONTROL OF CLEANROOMS |
| I.S. EN 9223-100:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 100: A GUIDE FOR THE APPLICATION OF THE PRINCIPLES OF CONFIGURATION MANAGEMENT |
| I.S. EN 16603-10-03:2014 | SPACE ENGINEERING - TESTING |
| I.S. EN 9223-102:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 102: CONFIGURATION STATUS ACCOUNTING |
| I.S. EN 16602-70-22:2014 | SPACE PRODUCT ASSURANCE - CONTROL OF LIMITED SHELF-LIFE MATERIALS |
| I.S. EN 16602-70-50:2015 | SPACE PRODUCT ASSURANCE - PARTICLES CONTAMINATION MONITORING FOR SPACECRAFT SYSTEMS AND CLEANROOMS |
| I.S. EN 16602-70-37:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF METALS TO STRESS-CORROSION CRACKING |
| I.S. EN 16603-35-10:2014 | SPACE ENGINEERING - COMPATIBILITY TESTING FOR LIQUID PROPULSION COMPONENTS, SUBSYSTEMS AND SYSTEMS |
| I.S. EN 16602-20-10:2014 | SPACE PRODUCT ASSURANCE - OFF-THE-SHELF ITEMS UTILIZATION IN SPACE SYSTEMS |
| I.S. EN 16601-10:2015 | SPACE PROJECT MANAGEMENT - PROJECT PLANNING AND IMPLEMENTATION |
| I.S. EN 16602-60-14:2014 | SPACE PRODUCT ASSURANCE - RELIFING PROCEDURE - EEE COMPONENTS |
| PREN 16603-60-21 : DRAFT 2016 | SPACE ENGINEERING - GYROS TERMINOLOGY AND PERFORMANCE SPECIFICATION |
| 16/30340711 DC : 0 | BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION |
| I.S. EN 16602-70-03:2014 | SPACE PRODUCT ASSURANCE - BLACK-ANODIZING OF METALS WITH INORGANIC DYES |
| I.S. EN 16603-10-06:2014 | SPACE ENGINEERING - PART 10-06: TECHNICAL REQUIREMENTS SPECIFICATION |
| BS EN 16602-40:2018 | Space product assurance. Safety |
| EN 9223-102:2018 | Programme Management - Configuration Management - Part 102: Configuration status accounting |
| EN 16603-10-04:2015 | Space engineering - Space environment |
| BS EN 16602-70-10:2015 | Space product assurance. Qualification of printed circuit boards |
| EN 16601-10:2015 | Space project management - Project planning and implementation |
| DIN EN 16603-10-06:2014-11 | SPACE ENGINEERING - PART 10-06: TECHNICAL REQUIREMENTS SPECIFICATION |
| BS EN 16603-10-12:2014 | Space engineering. Method for the calculation of radiation received and its effects, and a policy for design margins |
| BS EN 16602-70-29:2014 | Space product assurance. Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| I.S. EN 16603-32-02:2014 | SPACE ENGINEERING - STRUCTURAL DESIGN AND VERIFICATION OF PRESSURIZED HARDWARE |
| BS EN 16602-10-09:2014 | Space product assurance. Nonconformance control system |
| I.S. EN 16603-60-10:2014 | SPACE ENGINEERING - CONTROL PERFORMANCES |
| BS EN 16602-70-22:2014 | Space product assurance. Control of limited shelf-life materials |
| I.S. EN 16603-10-24:2017 | SPACE ENGINEERING - INTERFACE MANAGEMENT |
| UNI EN 16603-10-09 : 2014 | SPACE ENGINEERING - REFERENCE COORDINATE SYSTEM |
| BS EN 16601-40:2014 | Space project management Configuration and information management |
| BS EN 16601-80:2014 | Space project management Risk management |
| I.S. EN 16602-40-12:2014 | SPACE PRODUCT ASSURANCE - FAULT TREE ANALYSIS - ADOPTION NOTICE ECSS/IEC 61025 |
| BS EN 16603-50-04:2014 | Space engineering. Space data links. Telecommand protocols, synchronization and channel coding |
| BS EN 16603-60-20:2014 | Space engineering. Star sensor terminology and performance specification |
| BS EN 16603-50-01:2014 | Space engineering. Space data links. Telemetry synchronization and channel coding |
| BS EN 16602-70-58:2015 | Space product assurance. Bioburden control of cleanrooms |
| BS EN 16603-40:2014 | Space engineering Software |
| BS EN 16603-70-32:2014 | Space engineering. Test and operations procedure language |
| BS EN 16603-60-10:2014 | Space engineering. Control performances |
| BS EN 16602-70-37:2014 | Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking |
| BS EN 16603-31-02:2015 | Space engineering. Two-phase heat transport equipment |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| BS EN 16603-34:2014 | Space engineering Environmental control and life support (ECLS) |
| I.S. EN 16603-50-52:2014 | SPACE ENGINEERING - SPACEWIRE - REMOTE MEMORY ACCESS PROTOCOL |
| BS EN 16603-50-14:2014 | Space engineering. Spacecraft discrete interfaces |
| I.S. EN 16602-70-57:2015 | SPACE PRODUCT ASSURANCE - DRY HEAT BIOBURDEN REDUCTION FOR FLIGHT HARDWARE |
| I.S. EN 16603-35-03:2014 | SPACE ENGINEERING - LIQUID PROPULSION FOR LAUNCHERS |
| 16/30342495 DC : 0 | BS EN 16602-10 - SPACE PRODUCT ASSURANCE - PRODUCT ASSURANCE MANAGEMENT |
| BS EN 16602-70-50:2015 | Space product assurance. Particles contamination monitoring for spacecraft systems and cleanrooms |
| PREN 16603-31-02 : DRAFT 2016 | SPACE ENGINEERING - TWO-PHASE HEAT TRANSPORT EQUIPMENT |
| PREN 9223-104 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 104: CONFIGURATION CONTROL |
| I.S. EN 16603-35:2014 | SPACE ENGINEERING - PROPULSION GENERAL REQUIREMENTS |
| I.S. EN 16603-50-05:2014 | SPACE ENGINEERING - RADIO FREQUENCY AND MODULATION |
| I.S. EN 16601-10-01:2014 | SPACE PROJECT MANAGEMENT - PART 10-01: ORGANIZATION AND CONDUCT OF REVIEWS |
| I.S. EN 16603-32-10:2014 | SPACE ENGINEERING - STRUCTURAL FACTORS OF SAFETY FOR SPACEFLIGHT HARDWARE |
| I.S. EN 16602-70-05:2014 | SPACE PRODUCT ASSURANCE - DETECTION OF ORGANIC CONTAMINATION SURFACES BY INFRARED SPECTROSCOPY |
| I.S. EN 16602-70-10:2015 | SPACE PRODUCT ASSURANCE - QUALIFICATION OF PRINTED CIRCUIT BOARDS |
| I.S. EN 16603-10-11:2014 | SPACE ENGINEERING - HUMAN FACTORS ENGINEERING |
| I.S. EN 16603-32-03:2014 | SPACE ENGINEERING - STRUCTURAL FINITE ELEMENT MODELS |
| I.S. EN 16602-70-55:2015 | SPACE PRODUCT ASSURANCE - MICROBIOLOGICAL EXAMINATION OF FLIGHT HARDWARE AND CLEANROOMS |
| I.S. EN 16603-31-02:2015 | SPACE ENGINEERING - TWO-PHASE HEAT TRANSPORT EQUIPMENT |
| I.S. EN 16603-10-04:2015 | SPACE ENGINEERING - SPACE ENVIRONMENT |
| I.S. EN 16603-35-06:2014 | SPACE ENGINEERING - CLEANLINESS REQUIREMENTS FOR SPACECRAFT PROPULSION HARDWARE |
| I.S. EN 16603-70-11:2015 | SPACE ENGINEERING - SPACE SEGMENT OPERABILITY |
| I.S. EN 16602-60-02:2014 | SPACE PRODUCT ASSURANCE - ASIC AND FPGA DEVELOPMENT |
| I.S. EN 16602-70-53:2015 | SPACE PRODUCT ASSURANCE - MATERIALS AND HARDWARE COMPATIBILITY TESTS FOR STERILIZATION PROCESSES |
| I.S. EN 16603-50-02:2014 | SPACE ENGINEERING - RANGING AND DOPPLER TRACKING |
| EN 9223-100:2018 | Programme Management - Configuration Management - Part 100: A guide for the application of the principles of configuration management |
| BS EN 16602-70-36:2014 | Space product assurance. Material selection for controlling stress-corrosion cracking |
| BS EN 16603-32-03:2014 | Space engineering. Structural finite element models |
| DIN EN 16601-40:2014-12 | SPACE PROJECT MANAGEMENT - PART 40: CONFIGURATION AND INFORMATION MANAGEMENT |
| I.S. EN 16602-10-04:2014 | SPACE PRODUCT ASSURANCE - CRITICAL-ITEM CONTROL |
| UNI EN 16603-20-06 : 2014 | SPACE ENGINEERING - SPACECRAFT CHARGING |
| 16/30340717 DC : 0 | BS EN 16603-50-15 - SPACE ENGINEERING - CANBUS EXTENTION PROTOCOL |
| I.S. EN 16603-70:2015 | SPACE ENGINEERING - GROUND SYSTEMS AND OPERATIONS |
| BS EN 16603-32-02:2014 | Space engineering. Structural design and verification of pressurized hardware |
| I.S. EN 16603-50-03:2014 | SPACE ENGINEERING - SPACE DATA LINKS - TELEMETRY TRANSFER FRAME PROTOCOL |
| BS EN 16603-20-08:2014 | Space engineering Photovoltaic assemblies and components |
| DIN EN 16603-10-06 E : 2014 | SPACE ENGINEERING - PART 10-06: TECHNICAL REQUIREMENTS SPECIFICATION |
| BS EN 16601-10:2015 | Space project management. Project planning and implementation |
| BS EN 16603-10-04:2015 | Space engineering. Space environment |
| BS EN 16601-60:2014 | Space project management Cost and schedule management |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| I.S. EN 16602-20-08:2016 | SPACE PRODUCT ASSURANCE - STORAGE, HANDLING AND TRANSPORTATION OF SPACECRAFT HARDWARE |
| BS EN 16603-70-11:2015 | Space engineering. Space segment operability |
| BS EN 16602-70-20:2014 | Space product assurance. Determination of the susceptibility of silver-plated copper wire and cable to \'red-plague\' corrosion |
| BS EN 16602-20-10:2014 | Space product assurance. Off-the-shelf items utilization in space systems |
| I.S. EN 16602-70-18:2014 | SPACE PRODUCT ASSURANCE - PREPARATION, ASSEMBLY AND MOUNTING OF RF COAXIAL CABLES |
| I.S. EN 16602-30-11:2014 | SPACE PRODUCT ASSURANCE - DERATING - EEE COMPONENTS |
| BS EN 16602-70-07:2014 | Space product assurance. Verification and approval of automatic machine wave soldering |
| BS EN 16603-35-10:2014 | Space engineering. Compatibility testing for liquid propulsion components, subsystems and systems |
| 16/30340714 DC : 0 | BS EN 16603-10-24 - SPACE ENGINEERING - INTERFACE MANAGEMENT |
| BS EN 16602-70-13:2015 | Space product assurance. Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
| BS EN 16603-10-24:2017 | Space engineering. Interface management |
| BS EN 16603-10-03:2014 | Space engineering. Testing |
| I.S. EN 16603-50-51:2014 | SPACE ENGINEERING - SPACEWIRE PROTOCOL IDENTIFICATION |
| BS EN 16602-70-53:2015 | Space product assurance. Materials and hardware compatibility tests for sterilization processes |
| PREN 9223-101 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 101: CONFIGURATION IDENTIFICATION |
| I.S. EN 16603-32-08:2016 | SPACE ENGINEERING - MATERIALS |
| DIN EN 16601-10:2015-05 | SPACE PROJECT MANAGEMENT - PART 10: PROJECT PLANNING AND IMPLEMENTATION |
| I.S. EN 16603-50-04:2014 | SPACE ENGINEERING - SPACE DATA LINKS - TELECOMMAND PROTOCOLS, SYNCHRONIZATION AND CHANNEL CODING |
| I.S. EN 9223-104:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 104: CONFIGURATION CONTROL |
| I.S. EN 16602-30-02:2014 | SPACE PRODUCT ASSURANCE - FAILURE MODES, EFFECTS (AND CRITICALITY) ANALYSIS (FMEA/FMECA) |
| I.S. EN 16603-34:2014 | SPACE ENGINEERING - PART 34: ENVIRONMENTAL CONTROL AND LIFE SUPPORT (ECLS) |
| I.S. EN 16601-80:2014 | SPACE PROJECT MANAGEMENT - PART 80: RISK MANAGEMENT |
| I.S. EN 16603-40:2014 | SPACE ENGINEERING - PART 40: SOFTWARE |
| BS EN 16602-70-26:2014 | Space product assurance. Crimping of high-reliability electrical connections |
| I.S. EN 16601-40:2014 | SPACE PROJECT MANAGEMENT - PART 40: CONFIGURATION AND INFORMATION MANAGEMENT |
| I.S. EN 16603-60-20:2014 | SPACE ENGINEERING - STAR SENSOR TERMINOLOGY AND PERFORMANCE SPECIFICATION |
| I.S. EN 16602-70-29:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF OFFGASSING PRODUCTS FROM MATERIALS AND ASSEMBLED ARTICLES TO BE USED IN A MANNED SPACE VEHICLE CREW COMPARTMENT |
| I.S. EN 16602-10:2017 | SPACE PRODUCT ASSURANCE - PRODUCT ASSURANCE MANAGEMENT |
| I.S. EN 16603-35-02:2014 | SPACE ENGINEERING - SOLID PROPULSION FOR SPACECRAFTS AND LAUNCHERS |
| I.S. EN 16603-70-32:2014 | SPACE ENGINEERING - TEST AND OPERATIONS PROCEDURE LANGUAGE |
| I.S. EN 16603-20-08:2014 | SPACE ENGINEERING - PART 20-08: PHOTOVOLTAIC ASSEMBLIES AND COMPONENTS |
| I.S. EN 16602-30:2018 | SPACE PRODUCT ASSURANCE - DEPENDABILITY |
| EN 16602-70-26:2014 | Space product assurance - Crimping of high-reliability electrical connections |
| PREN 16602-70-14 : DRAFT 2016 | SPACE PRODUCT ASSURANCE - CORROSION |
| EN 9223-101:2018 | Programme Management - Configuration Management - Part 101: Configuration identification |
| EN 16603-10:2018 | Space engineering - System engineering general requirements |
| EN 16602-40:2018 | Space product assurance - Safety |
| BS EN 16603-32-01:2014 | Space engineering. Fracture control |
| EN 16602-10-09:2014 | Space product assurance - Nonconformance control system |
| EN 16603-60-20:2014 | Space engineering - Star sensor terminology and performance specification |
| EN 16603-32-10:2014 | Space engineering - Structural factors of safety for spaceflight hardware |
| EN 16602-60-14:2014 | Space product assurance - Relifing procedure - EEE components |
| EN 16603-20-06:2014 | Space engineering - Spacecraft charging |
| EN 16603-70-41:2017 | Space engineering - Telemetry and telecommand packet utilization |
| EN 16602-70-53:2015 | Space product assurance - Materials and hardware compatibility tests for sterilization processes |
| EN 16603-50-14:2014 | Space engineering - Spacecraft discrete interfaces |
| EN 16602-60:2015 | Space product assurance - Electrical, electronic and electromechanical (EEE) components |
| EN 16603-50-51:2014 | Space engineering - SpaceWire protocol identification |
| EN 16602-70-50:2015 | Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms |
| EN 16602-60-05:2014 | Space product assurance - Generic procurement requirements for hybrids |
| EN 16602-70-37:2014 | Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking |
| EN 16603-10-12:2014 | Space engineering - Method for the calculation of radiation received and its effects, and a policy for design margins |
| UNI EN 16603-20-07 : 2014 | SPACE ENGINEERING - ELECTROMAGNETIC COMPATIBILITY |
| EN 16602-20-10:2014 | Space product assurance - Off-the-shelf items utilization in space systems |
| EN 16602-70-55:2015 | Space product assurance - Microbiological examination of flight hardware and cleanrooms |
| I.S. EN 16602-70-31:2014 | SPACE PRODUCT ASSURANCE - APPLICATION OF PAINTS AND COATINGS ON SPACE HARDWARE |
| BS EN 16602-60-05:2014 | Space product assurance. Generic procurement requirements for hybrids |
| I.S. EN 16602-70-01:2014 | SPACE PRODUCT ASSURANCE - CLEANLINESS AND CONTAMINATION CONTROL |
| I.S. EN 16602-70-04:2014 | SPACE PRODUCT ASSURANCE - THERMAL TESTING FOR THE EVALUATION OF SPACE MATERIALS, PROCESSES, MECHANICAL PARTS AND ASSEMBLIES |
| BS EN 16602-30-11:2014 | Space product assurance. Derating. EEE components |
| BS EN 16602-70-57:2015 | Space product assurance. Dry Heat Bioburden Reduction for Flight Hardware |
| I.S. EN 16603-70-01:2015 | SPACE ENGINEERING - ON-BOARD CONTROL PROCEDURES |
| BS EN 16602-40-12:2014 | Space product assurance. Fault tree analysis. Adoption notice ECSS/IEC 61025 |
| BS EN 16603-20-07:2014 | Space engineering. Electromagnetic compatibility |
| BS EN 16602-10-04:2014 | Space product assurance. Critical-item control |
| BS EN 16603-20-06:2014 | Space engineering. Spacecraft charging |
| BS EN 16601-10-01:2014 | Space project management Organization and conduct of reviews |
| BS EN 16602-60:2015 | Space product assurance. Electrical, electronic and electromechanical (EEE) components |
| BS EN 16603-31:2014 | Space engineering. Thermal control general requirements |
| I.S. EN 16603-10:2018 | SPACE ENGINEERING - SYSTEM ENGINEERING GENERAL REQUIREMENTS |
| DIN EN 16601-40 E : 2014 | SPACE PROJECT MANAGEMENT - PART 40: CONFIGURATION AND INFORMATION MANAGEMENT |
| DIN EN 16601-60:2014-12 | SPACE PROJECT MANAGEMENT - PART 60: COST AND SCHEDULE MANAGEMENT |
| BS EN 16602-70-45:2014 | Space product assurance. Mechanical testing of metallic materials |
| I.S. EN 16603-32-11:2014 | SPACE ENGINEERING - MODAL SURVEY ASSESSMENT |
| BS EN 16603-10-09:2014 | Space engineering. Reference coordinate system |
| BS EN 16603-32-10:2014 | Space engineering. Structural factors of safety for spaceflight hardware |
| I.S. EN 16603-20-07:2014 | SPACE ENGINEERING - ELECTROMAGNETIC COMPATIBILITY |
| BS EN 16603-32:2014 | Space engineering. Structural general requirements |
| BS EN 16603-70:2015 | Space engineering. Ground systems and operations |
| I.S. EN 16603-50-15:2017 | SPACE ENGINEERING - CANBUS EXTENTION PROTOCOL |
| 13/30291492 DC : 0 | BS EN 16602-70-20 - SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF SILVER-PLATED COPPER WIRE AND CABLE TO 'RED-PLAGUE' CORROSION |
| BS EN 16602-60-02:2014 | Space product assurance. ASIC and FPGA development |
| BS EN 16602-70-04:2014 | Space product assurance. Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies |
| I.S. EN 16602-70-08:2015 | SPACE PRODUCT ASSURANCE - MANUAL SOLDERING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
| I.S. EN 16602-70-26:2014 | SPACE PRODUCT ASSURANCE - CRIMPING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
| BS EN 16603-70-41:2017 | Space engineering. Telemetry and telecommand packet utilization |
| BS EN 16602-70-01:2014 | Space product assurance. Cleanliness and contamination control |
| BS EN 16603-32-11:2014 | Space engineering. Modal survey assessment |
| BS EN 16603-50-05:2014 | Space engineering. Radio frequency and modulation |
| 16/30349968 DC : 0 | BS EN 16602-80 - SPACE PRODUCT ASSURANCE - SOFTWARE PRODUCT ASSURANCE |
| BS EN 16603-35-06:2014 | Space engineering. Cleanliness requirements for spacecraft propulsion hardware |
| PREN 9223-103 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 103: CONFIGURATION VERIFICATIONS, REVIEWS AND AUDITS |
| BS EN 16602-60-13:2015 | Space product assurance. Requirements for the use of COTS components |
| I.S. EN 16602-60-15:2014 | SPACE PRODUCT ASSURANCE - RADIATION HARDNESS ASSURANCE - EEE COMPONENTS |
| I.S. EN 16602-70:2016 | SPACE PRODUCT ASSURANCE - MATERIALS, MECHANICAL PARTS AND PROCESSES |
| I.S. EN 16602-10-09:2014 | SPACE PRODUCT ASSURANCE - NONCONFORMANCE CONTROL SYSTEM |
| I.S. EN 16603-31:2014 | SPACE ENGINEERING - THERMAL CONTROL GENERAL REQUIREMENTS |
| 16/30336547 DC : 0 | BS EN 16602-70-39 - SPACE PRODUCT ASSURANCE - PART 70-39: WELDING OF METALLIC MATERIALS FOR FLIGHT HARDWARE |
| 16/30352063 DC : 0 | BS EN 16603-31-02 - SPACE ENGINEERING - TWO-PHASE HEAT TRANSPORT EQUIPMENT |
| I.S. EN 9223-103:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 103: CONFIGURATION VERIFICATIONS, REVIEWS AND AUDITS |
| I.S. EN 16603-50-13:2014 | SPACE ENGINEERING - INTERFACE AND COMMUNICATION PROTOCOL FOR MIL-STD-1553B DATA BUS ONBOARD SPACECRAFT |
| I.S. EN 9223-101:2018 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 101: CONFIGURATION IDENTIFICATION |
| EN 16603-31-02:2015 | Space engineering - Two-phase heat transport equipment |
| I.S. EN 16602-20:2014 | SPACE PRODUCT ASSURANCE - QUALITY ASSURANCE |
| I.S. EN 16603-10-09:2014 | SPACE ENGINEERING - REFERENCE COORDINATE SYSTEM |
| EN 16603-50-15:2017 | Space engineering - CANbus extention protocol |
| EN 16602-20:2014 | Space product assurance - Quality assurance |
| EN 16603-32-08:2016 | Space engineering - Materials |
| EN 16602-20-07:2016 | Space product assurance - Quality and safety assurance for space test centres |
| EN 16602-70-04:2014 | Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies |
| EN 16603-32-03:2014 | Space engineering - Structural finite element models |
| EN 16603-50-03:2014 | Space engineering - Space data links - Telemetry transfer frame protocol |
| EN 16603-50-02:2014 | Space engineering - Ranging and Doppler tracking |
| EN 16602-20-08:2016 | Space product assurance - Storage, handling and transportation of spacecraft hardware |
| EN 16603-10-24:2017 | Space engineering - Interface management |
| EN 16602-30:2018 | Space product assurance - Dependability |
| EN 16602-70-07:2014 | Space product assurance - Verification and approval of automatic machine wave soldering |
| EN 16603-35-02:2014 | Space engineering - Solid propulsion for spacecrafts and launchers |
| EN 16603-32:2014 | Space engineering - Structural general requirements |
| EN 16602-10-04:2014 | Space product assurance - Critical-item control |
| EN 16603-60-10:2014 | Space engineering - Control performances |
| EN 16601-10-01:2014 | Space project management - Part 10-01: Organization and conduct of reviews |
| EN 16603-70:2015 | Space engineering - Ground systems and operations |
| EN 16602-70-09:2015 | Space product assurance - Measurements of thermo-optical properties of thermal control materials |
| EN 16603-35-10:2014 | Space engineering - Compatibility testing for liquid propulsion components, subsystems and systems |
| EN 16603-35-03:2014 | Space engineering - Liquid propulsion for launchers |
| EN 16602-70-20:2014 | Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 16602-70-18:2014 | Space product assurance - Preparation, assembly and mounting of RF coaxial cables |
| EN 16602-60-13:2015 | Space product assurance - Requirements for the use of COTS components |
| EN 16603-50-13:2014 | Space engineering - Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft |
| EN 16603-32-11:2014 | Space engineering - Modal survey assessment |
| EN 16603-10-11:2014 | Space engineering - Human factors engineering |
| EN 16603-50-05:2014/AC:2017 | SPACE ENGINEERING - RADIO FREQUENCY AND MODULATION |
| EN 16602-70-29:2014 | Space product assurance - Determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| EN 16602-70-57:2015 | Space product assurance - Dry Heat Bioburden Reduction for Flight Hardware |
| EN 16603-70-32:2014 | Space engineering - Test and operations procedure language |
| EN 16603-70-01:2015 | Space engineering - On-board control procedures |
| EN 16603-70-11:2015 | Space engineering - Space segment operability |
| EN 16603-34:2014 | Space engineering - Part 34: Environmental control and life support (ECLS) |
| EN 16602-70-58:2015 | Space product assurance - Bioburden control of cleanrooms |
| EN 16602-70-21:2014 | Space product assurance - Flammability testing for the screening of space materials |
| EN 16602-70-31:2014 | Space product assurance - Application of paints and coatings on space hardware |
| EN 16602-30-09:2014 | Space product assurance - Availability analysis |
| EN 16602-40-12:2014 | Space product assurance - Fault tree analysis - Adoption notice ECSS/IEC 61025 |
| EN 16603-40:2014 | Space engineering - Part 40: Software |
| EN 16603-50-52:2014 | Space engineering - SpaceWire - Remote memory access protocol |
| EN 16603-32-02:2014 | Space engineering - Structural design and verification of pressurized hardware |
| EN 16602-70-03:2014 | Space product assurance - Black-anodizing of metals with inorganic dyes |
| EN 16603-35-06:2014 | Space engineering - Cleanliness requirements for spacecraft propulsion hardware |
| EN 16603-10-06:2014 | Space engineering - Part 10-06: Technical requirements specification |
| EN 16602-60-12:2014 | Space product assurance - Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs) |
| EN 16602-70-05:2014 | Space product assurance - Detection of organic contamination surfaces by infrared spectroscopy |
| EN 16603-60-30:2015 | Space engineering - Satellite AOCS requirements |
| EN 16603-50-04:2014 | Space engineering - Space data links - Telecommand protocols, synchronization and channel coding |
| EN 16603-35:2014 | Space engineering - Propulsion general requirements |
| EN 16602-70-10:2015 | Space product assurance - Qualification of printed circuit boards |
| EN 16603-50:2014 | Space engineering - Communications |
| EN 16602-70-02:2014 | Space product assurance - Thermal vacuum outgassing test for the screening of space materials |
| EN 16602-60-15:2014 | Space product assurance - Radiation hardness assurance - EEE components |
| EN 16603-10-09:2014 | Space engineering - Reference coordinate system |
| EN 16602-30-02:2014 | Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA) |
| EN 16603-20-07:2014 | Space engineering - Electromagnetic compatibility |
| EN 16603-31:2014 | Space engineering - Thermal control general requirements |
| EN 16602-70-06:2014 | Space product assurance - Particle and UV radiation testing for space materials |
| EN 16602-70-56:2015 | Space product assurance - Vapour Phase Bioburden Reduction for Flight Hardware |
| EN 16602-60-02:2014 | Space product assurance - ASIC and FPGA development |
| EN 16602-70-71:2016 | Space product assurance - Materials, processes and their data selection |
| EN 16603-50-01:2014 | Space engineering - Space data links - Telemetry synchronization and channel coding |
| EN 16603-50-53:2015 | Space engineering - SpaceWire - CCSDS packet transfer protocol |
| EN 16603-10-03:2014 | Space engineering - Testing |
| EN 16602-70-22:2014 | Space product assurance - Control of limited shelf-life materials |
| EN 16602-70-11:2015 | Space product assurance - Procurement of printed circuit boards |
| EN 16601-80:2014 | Space project management - Part 80: Risk management |
| EN 16602-70-01:2014 | Space product assurance - Cleanliness and contamination control |
| EN 16602-70-36:2014 | Space product assurance - Material selection for controlling stress-corrosion cracking |
| EN 16603-20-08:2014 | Space engineering - Part 20-08: Photovoltaic assemblies and components |
| EN 16602-70-13:2015 | Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
| EN 16602-70-45:2014 | Space product assurance - Mechanical testing of metallic materials |
| EN 16602-70-08:2015 | Space product assurance - Manual soldering of high-reliability electrical connections |
| I.S. EN 16602-70-06:2014 | SPACE PRODUCT ASSURANCE - PARTICLE AND UV RADIATION TESTING FOR SPACE MATERIALS |
| BS EN 16602-70-03:2014 | Space product assurance. Black-anodizing of metals with inorganic dyes |
| BS EN 16603-50-13:2014 | Space engineering. Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft |
| DIN EN 16601-60 E : 2014 | SPACE PROJECT MANAGEMENT - PART 60: COST AND SCHEDULE MANAGEMENT |
| I.S. EN 16602-70-56:2015 | SPACE PRODUCT ASSURANCE - VAPOUR PHASE BIOBURDEN REDUCTION FOR FLIGHT HARDWARE |
| I.S. EN 16602-60-12:2014 | SPACE PRODUCT ASSURANCE - DESIGN, SELECTION, PROCUREMENT AND USE OF DIE FORM MONOLITHIC MICROWAVE INTEGRATED CIRCUITS (MMICS) |
| BS EN 16602-70-31:2014 | Space product assurance. Application of paints and coatings on space hardware |
| BS EN 16603-35-02:2014 | Space engineering. Solid propulsion for spacecrafts and launchers |
| BS EN 16602-70:2016 | Space product assurance. Materials, mechanical parts and processes |
| BS EN 16602-10:2017 | Space product assurance. Product assurance management |
| BS EN 16603-50-52:2014 | Space engineering. SpaceWire. Remote memory access protocol |
| 16/30336550 DC : 0 | BS EN 16603-20-20 - SPACE ENGINEERING - INTERFACE REQUIREMENTS FOR ELECTRICAL POWER |
| BS EN 16603-35-03:2014 | Space engineering. Liquid propulsion for launchers |
| I.S. EN 16602-70-07:2014 | SPACE PRODUCT ASSURANCE - VERIFICATION AND APPROVAL OF AUTOMATIC MACHINE WAVE SOLDERING |
| DIN EN 16601-80 E : 2014 | SPACE PROJECT MANAGEMENT - PART 80: RISK MANAGEMENT |
| BS EN 16602-70-30:2014 | Space product assurance. Wire wrapping of high-reliability electrical connections |
| I.S. EN 16602-70-11:2015 | SPACE PRODUCT ASSURANCE - PROCUREMENT OF PRINTED CIRCUIT BOARDS |
| I.S. EN 16602-70-36:2014 | SPACE PRODUCT ASSURANCE - MATERIAL SELECTION FOR CONTROLLING STRESS-CORROSION CRACKING |
| I.S. EN 16602-70-13:2015 | SPACE PRODUCT ASSURANCE - MEASUREMENTS OF THE PEEL AND PULL-OFF STRENGTH OF COATINGS AND FINISHES USING PRESSURE-SENSITIVE TAPES |
| BS EN 16602-60-12:2014 | Space product assurance. Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs) |
| BS EN 16602-70-05:2014 | Space product assurance. Detection of organic contamination surfaces by infrared spectroscopy |
| BS EN 16603-50:2014 | Space engineering. Communications |
| BS EN 16603-50-02:2014 | Space engineering. Ranging and Doppler tracking |
| I.S. EN 16602-70-45:2014 | SPACE PRODUCT ASSURANCE - MECHANICAL TESTING OF METALLIC MATERIALS |
| UNI EN 16603-10-12 : 2014 | SPACE ENGINEERING - METHOD FOR THE CALCULATION OF RADIATION RECEIVED AND ITS EFFECTS, AND A POLICY FOR DESIGN MARGINS |
| PREN 9223-102 : DRAFT 2016 | PROGRAMME MANAGEMENT - CONFIGURATION MANAGEMENT - PART 102: CONFIGURATION STATUS ACCOUNTING |
| I.S. EN 16602-70-71:2016 | SPACE PRODUCT ASSURANCE - MATERIALS, PROCESSES AND THEIR DATA SELECTION |
| I.S. EN 16602-70-09:2015 | SPACE PRODUCT ASSURANCE - MEASUREMENTS OF THERMO-OPTICAL PROPERTIES OF THERMAL CONTROL MATERIALS |
| I.S. EN 16603-10-12:2014 | SPACE ENGINEERING - METHOD FOR THE CALCULATION OF RADIATION RECEIVED AND ITS EFFECTS, AND A POLICY FOR DESIGN MARGINS |
| I.S. EN 16603-32:2014 | SPACE ENGINEERING - STRUCTURAL GENERAL REQUIREMENTS |
| UNI EN 16603-10-11 : 2014 | SPACE ENGINEERING - HUMAN FACTORS ENGINEERING |
| 16/30352066 DC : 0 | BS EN 16603-60-21 - SPACE ENGINEERING - GYROS TERMINOLOGY AND PERFORMANCE SPECIFICATION |
| I.S. EN 16602-60-05:2014 | SPACE PRODUCT ASSURANCE - GENERIC PROCUREMENT REQUIREMENTS FOR HYBRIDS |
| I.S. EN 16601-60:2014 | SPACE PROJECT MANAGEMENT - PART 60: COST AND SCHEDULE MANAGEMENT |
| I.S. EN 16602-30-09:2014 | SPACE PRODUCT ASSURANCE - AVAILABILITY ANALYSIS |
| I.S. EN 16603-20-06:2014 | SPACE ENGINEERING - SPACECRAFT CHARGING |
| I.S. EN 16603-70-41:2017 | SPACE ENGINEERING - TELEMETRY AND TELECOMMAND PACKET UTILIZATION |
| PREN 16602-80 : DRAFT 2016 | SPACE PRODUCT ASSURANCE - SOFTWARE PRODUCT ASSURANCE |
| I.S. EN 16602-70-30:2014 | SPACE PRODUCT ASSURANCE - WIRE WRAPPING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
| I.S. EN 16603-60-30:2015 | SPACE ENGINEERING - SATELLITE AOCS REQUIREMENTS |
| I.S. EN 16603-50-01:2014 | SPACE ENGINEERING - SPACE DATA LINKS - TELEMETRY SYNCHRONIZATION AND CHANNEL CODING |
| I.S. EN 16603-50:2014 | SPACE ENGINEERING - COMMUNICATIONS |
| I.S. EN 16602-70-21:2014 | SPACE PRODUCT ASSURANCE - FLAMMABILITY TESTING FOR THE SCREENING OF SPACE MATERIALS |
| 16/30341759 DC : 0 | BS EN 16602-70-54 - SPACE PRODUCT ASSURANCE - ULTRACLEANING OF FLIGHT HARDWARE |
| EN 9223-104:2018 | Programme Management - Configuration Management - Part 104: Configuration Control |
| EN 9223-103:2018 | Programme Management - Configuration Management - Part 103: Configuration Verifications, Reviews and Audits |
| EN 16602-70-30 : 2014 COR 2014 | SPACE PRODUCT ASSURANCE - WIRE WRAPPING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
| BS EN 16602-70-11:2015 | Space product assurance. Procurement of printed circuit boards |
| EN 16602-70:2016 | Space product assurance - Materials, mechanical parts and processes |
| EN 16601-60:2014 | Space project management - Cost and schedule management |
| EN 16601-40:2014 | Space project management - Configuration and information management |
| EN 16602-30-11:2014 | Space product assurance - Derating - EEE components |
| EN 16602-10:2017 | Space product assurance - Product assurance management |
| EN 16603-32-01:2014 | Space engineering - Fracture control |
| ISO 10795:2011 | Space systems Programme management and quality Vocabulary |
| ISO/IEC 9126-1:2001 | Software engineering Product quality Part 1: Quality model |
| ISO 24113:2011 | Space systems Space debris mitigation requirements |
| EN 45020:2006 | Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 17666:2016 | Space systems — Risk management |
| EN 45020 : 2006 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
| ISO 14623:2003 | Space systems - Pressure vessels and pressurized structures Design and operation |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.