EN 976-1:1997
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
04-20-2022
07-23-1997
1 Scope
2 Normative references
3 Materials
3.1 General
3.2 Resins
3.3 Reinforcement materials
3.4 Processing agents
3.5 Fillers
3.6 Additives
3.7 Structural core
3.8 Rib core
4 Tank construction
4.1 General
4.2 Cylinder wall and tank end build-up
4.3 Jointing of cylinder walls and/or tank ends
4.4 Tank ends
4.5 Manways
4.6 Connected pipes and their fittings
4.7 Lifting devices
4.8 Anchoring devices
4.9 Static charge dissipation
5 Requirements
5.1 Appearance
5.2 Dimensions
5.3 Leaktightness
5.4 Bending and torsion moments on fittings
5.5 Internal impact resistance
5.6 External impact resistance
5.7 Lifting system loading
5.8 Structural stability
5.9 Laminate requirements
5.10 Structural core properties
6 Test methods
6.1 General
6.2 Dimensions
6.3 Leaktightness
6.4 Bending and torsion moments on fittings
6.5 Internal impact resistance
6.6 External impact resistance
6.7 Lifting system loading
6.8 Negative pressure test
6.9 Tests on laminate
6.10 Structural core properties
7 Marking
Annexes
A (informative) A-deviations
This Part 1 of European Standard EN 976 specifies the requirements and associated test methods for horizontal, cylindrical single walls tanks made of glass reinforced thermosetting resins (hereafter called tanks), and for their accessories, used for the underground non-pressure storage of liquid petroleum based fuels. The tanks specified by this European Standard are tanks with one or more compartments and with or without the possibility of leak detection.
| Committee |
CEN/TC 210
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NBN EN 976-1 : 1997 | Identical |
| NF EN 19976-1 : 1997 | Identical |
| NS EN 976-1 : 1ED 1997 | Identical |
| UNI EN 976-1 : 1999 | Identical |
| DIN EN 976-1:1997-09 | Identical |
| BS EN 976-1:1997 | Identical |
| I.S. EN 976-1:1998 | Identical |
| SN EN 976-1 : 1998 | Identical |
| NEN EN 976-1 : 1997 | Identical |
| PN EN 976-1 : 2002 | Identical |
| UNE-EN 976-1:1998 | Identical |
| 11/30238497 DC : 0 | BS EN 13160-5 - LEAK DETECTION SYSTEMS - PART 5: TANK GAUGE LEAK DETECTION SYSTEMS |
| 16/30329416 DC : 0 | BS EN 12566-3 - SMALL WASTEWATER TREATMENT SYSTEMS UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| PREN 13012 : DRAFT 2010 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| I.S. EN 12566-3:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| BS EN 13617-3:2012 | Petrol filling stations Safety requirements for construction and performance of shear valves |
| EN 12566-3:2016 | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| EN 13012:2012 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| DIN EN 13617-3:2012-05 | Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
| I.S. EN 13012:2012 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| I.S. EN 13160-5:2016 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| DIN EN 858-1:2002-05 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| I.S. EN 13617-3:2012 | PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| 10/30219402 DC : 0 | BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| 14/30301263 DC : 0 | BS EN 13160-5 - LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| PREN 13617-3 : DRAFT 2010 | PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| PREN 13160-5 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| EN 13617-3:2012 | Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
| BS EN 13012:2012 | Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers |
| UNE-EN 13617-3:2012 | Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
| 10/30219411 DC : 0 | BS EN 13617-3 - PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| 00/715014 DC : DRAFT OCT 2000 | PREN 13617-3 - PETROL FILLING STATIONS - PART 3: CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| DIN EN 13012:2012-09 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| BS EN 13160-5:2004 | Leak detection systems Tank gauge leak detection systems |
| UNE-EN 12566-3:2017 | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| BS EN 12566-3 : 2005 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| UNE-EN 13012:2012 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| EN 858-1:2002/A1:2004 | SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| UNI EN 13012 : 2012 | PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS |
| UNI EN 13617-3 : 2012 | PETROL FILLING STATIONS - PART 3: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SHEAR VALVES |
| EN 976-2:1997 | Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks |
| EN 1825-1:2004/AC:2006 | GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| UNE-EN 13160-5:2017 | Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems |
| BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
| EN 13160-5:2016 | Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| ISO 1922:2012 | Rigid cellular plastics Determination of shear strength |
| EN 978:1997 | Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta |
| EN 63 : 1977 | GLASS REINFORCED PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - THREE POINT METHOD |
| EN 61 : 1977 | GLASS REINFORCED PLASTICS - DETERMINATION OF TENSILE PROPERTIES |
| EN 977:1997 | Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
| EN 637:1994/AC:1995 | PLASTICS PIPING SYSTEMS - GLASS REINFORCED PLASTICS COMPONENTS - DETERMINATION OF THE AMOUNTS OF CONSTITUENTS USING THE GRAVIMETRIC METHOD |
| ISO 844:2014 | Rigid cellular plastics Determination of compression properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.