• There are no items in your cart

EN 301:2017

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
Withdrawn date

05-31-2018

Published date

11-01-2017

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Working properties of the adhesive
7 Marking and labelling
Annex A (normative) - Delamination test for finger
        joints with separate spread of adhesive and
        hardener
Bibliography

This European Standard establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing conditions of load-bearing timber structures only.This European Standard only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions.The performance requirements of this European Standard apply to the adhesive only, not to the timber structure. This European Standard does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) nor the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. such as acetylated wood, heat treated wood and polymer impregnated wood.This European Standard is primarily intended for the use of adhesive manufacturers and for the use in timber structures bonded with adhesives, to assess or control the quality of adhesives. The requirements apply to the type testing of the adhesives. Production control activities are outside the scope of this European Standard.Adhesives meeting the requirements of this European Standard are adequate for use in a load-bearing timber structure, provided that the bonding process has been carried out according to an appropriate product standard.

DevelopmentNote
Supersedes PREN 301. (11/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn
Supersedes

Standards Relationship
DS EN 301 : 2017 Identical
UNI EN 301:2018 Identical
PN EN 301 : 2017 Identical
BS EN 301:2013 Identical
UNE-EN 301:2014 Identical
ONORM EN 301 : 2017 Identical
BS EN 301:2017 Identical
NS EN 301 : 2017 Identical
NBN EN 301 : 2013 Identical
SN EN 301 : 2018 Identical
NEN EN 301 : 2017 Identical
I.S. EN 301:2017 Identical
UNI EN 301 : 2013 Identical
SS-EN 301:2017 Identical
I.S. EN 301:2013 Identical
NF EN 301 : 2017 Identical
DIN EN 301:2015-09 (Draft) Identical
DIN EN 301:2018-01 Identical
DIN EN 301:2013-12 Identical
UNE-EN 301:2018 Identical

PREN 15497 : DRAFT 2011 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
UNE-CEN/TS 13307-2:2010 EX Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control
11/30237554 DC : 0 BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
I.S. EN 387:2002 GLUED LAMINATED TIMBER - LARGE FINGER JOINTS - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
11/30245835 DC : 0 BS EN 302-1 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH
XP CEN/TS 13307-2 : 2010 XP LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL
PREN 302-4 : DRAFT 2011 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH
06/30148318 DC : 0 EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
PREN 13200-6 : DRAFT 2017 SPECTATOR FACILITIES - PART 6: DEMOUNTABLE STANDS
09/30191937 DC : 0 BS ISO 20152-1 - TIMBER STRUCTURES - BOND PERFORMANCE OF ADHESIVES - PART 1: BASIC REQUIREMENTS
ISO 20152-2:2011 Timber structures — Bond performance of adhesives — Part 2: Additional requirements
NF EN 14974 : 2006 + A1 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
BS EN 1995-1-1 : 2012 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
BS EN 12811-2:2004 Temporary works equipment Information on materials
BS EN 302-3:2017 Adhesives for load-bearing timber structures. Test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
EN 12811-2:2004 Temporary works equipment - Part 2: Information on materials
EN 13353:2008+A1:2011 Solid wood panels (SWP) - Requirements
DIN EN 12811-2:2004-04 Temporary works equipment - Part 2: Information on materials; German version EN 12811-2:2004
DIN EN 386:2002-04 GLUED LAMINATED TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
CEN/TS 15679:2007 Thermal Modified Timber - Definitions and characteristics
EN 12436:2001 Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements
NF EN 13353 : 2009 + A1 2011 SOLID WOOD PANELS (SWP) - REQUIREMENTS
11/30245841 DC : 0 BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH
01/104734 DC : DRAFT JUNE 2001 PREN 14220 - TIMBER AND WOOD-BASED MATERIALS IN WINDOWS, EXTERNAL DOOR LEAVES AND EXTERNAL DOOR FRAMES - REQUIREMENTS AND SPECIFICATION
I.S. EN 1995-1-2:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
PREN 302-1 : DRAFT 2011 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH
09/30209028 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
15/30326225 DC : 0 BS EN 302-2 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: DETERMINATION OF RESISTANCE TO DELAMINATION
PREN 15416-3 : DRAFT 2015 ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR
DIN EN 15497:2014-07 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
15/30296768 DC : 0 BS EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR
11/30236369 DC : 0 BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER
09/30203195 DC : 0 BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
BS EN 16351:2015 Timber structures. Cross laminated timber. Requirements
DD CEN/TS 13307-2:2009 Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses Production control
04/30123913 DC : 0 EN 13307-2 - TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL
98/104512 DC : DRAFT SEP 1998 PREN 13307 - TIMBER BLANKS AND RAW PROFILES FOR JOINERY
TR 103 088 : 1.3.1 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); USING THE ETSI EN 301 489 SERIES OF EMC STANDARDS
UNI CEN/TS 13307-2 : 2010 LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL
UNE-EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
UNI EN 15497 : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
PREN 131-2 : DRAFT 2009 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
UNE-EN 14974:2006 Facilities for users of roller sports equipment - Safety requirements and test methods
I.S. ENV 1995-1-1:1995 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
DIN EN 15416-3 E : 2010 ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR
DIN EN 302-1:2013-06 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
DIN EN 1995-1-2 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
DIN EN 1995-1-1:2010-12 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008)
BS EN 13377:2002 Prefabricated timber formwork beams. Requirements, classification and assessment
I.S. EN 13353:2008 SOLID WOOD PANELS (SWP) - REQUIREMENTS
I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN 302-4:2013 ADHESIVE FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH
I.S. EN 302-1:2013 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH
I.S. EN 302-2:2017 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: DETERMINATION OF RESISTANCE TO DELAMINATION
I.S. EN 302-3:2017 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH
EN 16351:2015 Timber structures - Cross laminated timber - Requirements
DIN EN 16351 E : 2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
BS EN 15497:2014 Structural finger jointed solid timber. Performance requirements and minimum production requirements
S.R. CEN/TS 13307-2:2009 LAMINATED AND FINGER JOINTED TIMBER BLANKS AND SEMI-FINISHED PROFILES FOR NON-STRUCTURAL USES - PART 2: PRODUCTION CONTROL
DIN EN 14974 E : 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 302-5:2013-06 Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
DD CEN/TS 15679:2007 Thermal modified timber. Definitions and characteristics
07/30160760 DC : 0 BS EN 13353 - SOLID WOOD PANELS (SWP) - REQUIREMENTS
03/315081 DC : DRAFT SEP 2003 EN 14732-2 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - PART 2: PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
DIN EN 302-8 E : 2017 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR
I.S. EN 302-8:2017 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR
I.S. EN 302-5:2013 ADHESIVES FOR LOAD-BEARING STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF MAXIMUM ASSEMBLY TIME UNDER REFERENCED CONDITIONS
UNE-CEN/TS 15679:2009 EX Thermal Modified Timber - Definitions and characteristics
I.S. ENV 1995-1-2:1994 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
DIN EN 302-4:2013-06 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
BS EN 302-1:2013 Adhesives for load-bearing timber structures. Test methods Determination of longitudinal tensile shear strength
I.S. EN 14080:2013 TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
DIN EN 15416-3:2010-06 ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR
UNI EN 1995-1-2 : 2005 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
UNI EN 302-4 : 2013 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH
UNI EN 13353 : 2011 SOLID WOOD PANELS (SWP) - REQUIREMENTS
UNI EN 1995-1-1 : 2014 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
UNI EN 302-1 : 2013 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH
11/30245838 DC : 0 BS EN 302-2 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: DETERMINATION OF RESISTANCE TO DELAMINATION
DIN EN 16351:2015-12 Timber structures - Cross laminated timber - Requirements
EN 14974:2006+A1:2010 Facilities for users of roller sports equipment - Safety requirements and test methods
I.S. EN 15497:2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
11/30249114 DC : 0 BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
I.S. EN 1995-1-1:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
01/104735 DC : DRAFT JUNE 2001 PREN 14221 - TIMBER AND WOOD-BASED MATERIALS IN INTERNAL DOOR LEAVES AND INTERNAL DOOR FRAMES - REQUIREMENTS AND SPECIFICATION
BS EN 302-8:2017 Adhesives for load-bearing timber structures. Test methods Static load test of multiple bond line specimens in compression shear
UNE-EN 302-5:2013 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
UNI CEN/TS 15679 : 2008 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
BS EN 302-5:2013 Adhesives for load-bearing structures. Test methods Determination of maximum assembly time under referenced conditions
UNE-EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
I.S. EN 16351:2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
PREN 302-2 : DRAFT 2015 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: DETERMINATION OF RESISTANCE TO DELAMINATION
DD ENV 387:1999 Glued laminated timber. Large finger joints. Performance requirements and minimum production requirements
15/30328396 DC : 0 BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH
09/30193698 DC : DRAFT JAN 2009 BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS
UNE-EN 1995-1-2:2016 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design.
BS EN 14974 : 2006 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
17/30359261 DC : 0 BS EN 13200-6 - SPECTATOR FACILITIES - PART 6: DEMOUNTABLE STANDS
DIN EN 15416-3:2015-06 (Draft) ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR
EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
I.S. EN 15416-3:2017+A1:2019 ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR
DIN EN 302-2:2015-09 (Draft) ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: DETERMINATION OF RESISTANCE TO DELAMINATION
DIN EN 302-3:2015-09 (Draft) ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH
DIN EN 385:2007-11 FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
BS EN 302-2:2017 Adhesives for load-bearing timber structures. Test methods Determination of resistance to delamination
BS EN 13353 : 2008 SOLID WOOD PANELS (SWP) - REQUIREMENTS
BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
UNE-EN 16351:2016 Timber structures - Cross laminated timber - Requirements
BS EN 12436:2002 Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements
UNE-EN 13353:2009 Solid wood panels (SWP) - Requirements
BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures General - Structural fire design
UNE-EN 1995-1-1:2016 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings.
UNE-EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
UNE-EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
BS EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
BS EN 386:2001 Glued laminated timber. Performance requirements and minimum production requirements
BS EN 14080:2013 Timber structures. Glued laminated timber and glued solid timber. Requirements
BS EN 387:2001 Glued laminated timber. Large finger joints. Performance requirements and minimum production requirements
EN 385:2001 Finger jointed structural timber - Performance requirements and minimum production requirements
EN 302-2:2017 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
EN 386:2001 Glued laminated timber - Performance requirements and minimum production requirements
DIN EN 302-8:2017-05 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
EN 302-5:2013 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
EN 387:2001 Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements
EN 302-3:2017 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
00/102441 DC : DRAFT MAY 2000 BS EN 13912 - WOOD AND WOOD-BASED MATERIALS IN STAIR COMPONENTS - REQUIREMENTS
11/30245844 DC : 0 BS EN 302-4 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH
UNE-EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
03/310921 DC : 0 EN 14732-1 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - PART 1: PRODUCT REQUIREMENTS
15/30296774 DC : 0 BS EN 302-8 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR
DIN EN 15497 E : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
03/110340 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
11/30253102 DC : 0 BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
06/30145736 DC : 0 EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENTS LOADED IN BENDING SHEAR
UNI EN 14974 : 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 302-8:2015-06 (Draft) ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR
PREN 302-3 : DRAFT 2015 ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH
S.R. CEN/TS 15679:2007 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
I.S. EN 14974:2006 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
ISO 20152-1:2010 Timber structures Bond performance of adhesives Part 1: Basic requirements
DIN EN 13353:2011-07 Solid wood panels (SWP) - Requirements (includes Amendment A1:2011)
DIN EN 1995-1-1 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
BS EN 302-4:2013 Adhesives for load-bearing timber structures. Test methods Determination of the effects of wood shrinkage on the shear strength
BS EN 385:2001 Finger jointed structural timber. Performance requirements and minimum production requirements
DIN EN 14974:2010-12 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
CEN/TS 13307-2:2009 Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control
DIN EN 1995-1-2:2010-12 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009)
EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
DIN EN 385:2002-03 FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
EN 13377:2002 Prefabricated timber formwork beams - Requirements, classification and assessment

EN 13183-3:2005 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
EN 1245:2011 Adhesives - Determination of pH
EN 302-5:2013 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
EN 302-2:2017 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear
EN 12092:2001 Adhesives - Determination of viscosity
EN 13183-2:2002/AC:2003 MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - ESTIMATION BY ELECTRICAL RESISTANCE METHOD
EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
EN 302-3:2017 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
EN 408:2010+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
EN 15425:2017 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
EN 923 : 2015 COR 2016 ADHESIVES - TERMS AND DEFINITIONS
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.