• There are no items in your cart

EN 312:2010

Current
Current

The latest, up-to-date edition.

Particleboards - Specifications
Published date

09-08-2010

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classifications
5 General requirements for all board types
6 Requirement values
7 Requirements for general purpose boards for use in dry
   conditions (Type P1)
8 Requirements for boards for interior fitments (including
   furniture) for use in dry conditions (Type P2)
9 Requirements for non load-bearing boards for use in humid
   conditions (Type P3)
10 Requirements for load-bearing boards for use in dry
   conditions (Type P4)
11 Requirements for load-bearing boards for use in humid
   conditions (Type P5)
12 Requirements for heavy duty load-bearing boards for use
   in dry conditions (Type P6)
13 Requirements for heavy duty load-bearing boards for use
   in humid conditions (Type P7)
14 Supplementary properties
15 Verification of compliance
16 Marking
Annex A (normative) - Voluntary colour coding system for
        particleboards
Bibliography

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309.NOTE 1This standard is called up in EN 13986 for construction applications. Products specified in this standard are referred to in EN 13986 as resin-bonded particleboards.The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations.NOTE 2Such characteristic values (e.g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156.Additional information on supplementary properties for certain applications is also given.NOTE 3Particleboards in accordance with this standard may be referred to as P1 to P7-boards.Boards of type P4 to P7 are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN 1995-1-1 and/or performance standards).This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

Committee
CEN/TC 112
DevelopmentNote
Supersedes EN 312-1, EN 312-2, EN 312-3, EN 312-4, EN 312-5, EN 312-6 and EN 312-7. (01/2004) Supersedes PREN 312. (11/2010)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
DIN EN 312:2010-12 Identical
UNE-EN 312:2010 Identical
NF EN 312 : 2010 Identical
BS EN 312:2010 Identical
NS EN 312 : 1ED 2010 Identical
SN EN 312 : 2010 Identical
I.S. EN 312:2010 Identical
NBN EN 312 : 2010 Identical
SANS 50312 : 2ED 2015 Identical
NEN EN 312 : 2010 Identical
PN EN 312 : 2011 Identical
UNI EN 312 : 2010 Identical
SANS 50312:2015(R2022) Identical

BS EN 50632-3-1:2016 Electric motor-operated tools. Dust measurement procedure Particular requirements for transportable table saws
I.S. EN 492:2012 Fibre-cement slates and fittings - Product specification and test methods
11/30237554 DC : 0 BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
DIN EN 14320-1:2013-04 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
10/30233182 DC : 0 BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
BS EN 50632-2-17:2016 Electric motor-operated tools. Dust measurement procedure Particular requirements for routers and trimmers
BS EN 50632-2-19:2016 Electric motor-operated tools. Dust measurement procedure Particular requirements for jointers
15/30323610 DC : 0 BS EN 50632-2-11 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS
04/30113290 DC : DRAFT MAY 2004 EN 309 - PARTICLEBOARDS - DEFINITION AND CLASSIFICATION
S.R. CEN/TS 16368:2014 LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
07/30167661 DC : DRAFT AUG 2007 BS EN 15715 - THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
PREN 50632-2-11 : DRAFT 2015 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS
PD CEN/TR 12872:2014 Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
CEI EN 50632-2-17 : 1ED 2017 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS
PREN 12871 : DRAFT 2011 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
I.S. EN 50632-2-5:2016 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS
BS EN 15101-1:2013 Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products Specification for the products before installation
I.S. EN 14320-1:2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
I.S. EN 15101-1:2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
I.S. EN 14041:2018 RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
I.S. EN 60745-2-11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS (JIG AND SABRE SAWS)
BS EN 60745-2-11:2010 Generic smart grid requirements Resources connected to the grid domains
CEI EN 50632-2-19 : 1ED 2017 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS
I.S. EN 50632-3-1:2016 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS
PREN 14974 : DRAFT 2016 SKATEPARKS - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN 15101-1 : 2013 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
NF EN 14974 : 2006 + A1 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
16/30345765 DC : 0 BS EN 14974 - SKATEPARKS - SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
EN 15101-1:2013 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
UNI EN 1457-1 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
EN 50632-2-17:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers
EN 50632-3-1:2016 Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws
EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
EN 50632-2-5:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws
DIN EN 14964 E : 2007 RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS
BS EN 1995-1-1 : 2012 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
UNE-EN 13238:2011 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
BS EN 326-2 : 2010 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
BS EN 295-7:2013 Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking
BS EN 14964:2006 Rigid underlays for discontinuous roofing. Definitions and characteristics
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
EN 13069:2005 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
EN 50632-2-11:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
CEN/TS 12872:2007 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
CEN/TS 16526:2013 Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics
EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
CEN/TS 16368:2014 Lightweight Particleboards - Specifications
15/30328188 DC : 0 BS EN 50632-3-1 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS
DD CEN/TS 12872:2007 Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
DIN EN 13381-1:2014-12 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
UNE-EN 1457-2:2013 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
BS EN 50632-2-11:2016 Electric motor-operated tools. Dust measurement procedure Particular requirements for jig and sabre saws
BS EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the rigid foam spray system before installation
PREN 492 : DRAFT 2010 FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
NF EN 15715 : 2010 THERMAL INSULATION PRODUCTS - INSTRUCTIONS FOR MOUNTING AND FIXING FOR REACTION TO FIRE TESTING - FACTORY MADE PRODUCTS
UNE-EN 492:2013 Fibre-cement slates and fittings - Product specification and test methods
I.S. EN 14315-1:2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
I.S. EN 50632-2-17:2016 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS
S.R. CEN/TR 12872:2014 WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS
CEI EN 50632-3-1 : 1ED 2017 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS
I.S. EN 1457-2:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
UNE-EN 14974:2006 Facilities for users of roller sports equipment - Safety requirements and test methods
DIN EN 15101-1:2013-12 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION
UNI EN 13381-1 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
DIN EN 12871:2013-09 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
DIN EN 13986:2015-06 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
DIN EN 14964:2007-01 RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS
DIN EN 326-2:2014-10 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014
DIN EN 14322:2004-06 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
DIN EN 1995-1-1:2010-12 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008)
BS EN 12871:2013 Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
I.S. EN 13238:2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES
I.S. EN 1806:2006 CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
I.S. EN 309:2005 PARTICLEBOARDS - DEFINITION AND CLASSIFICATION
I.S. EN 13986:2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 295-7:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
I.S. EN 12871:2013 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
S.R. CEN/TS 14472-1:2003 RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL
DIN EN 13238:2010-06 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 13069:2005-12 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
I.S. EN 14322:2017 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
I.S. EN 326-2:2010 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
CEI EN 50632-2-11 : 1ED 2017 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS
I.S. EN 50632-2-19:2016 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS
11/30253904 DC : 0 BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
UNE-EN 1457-1:2013 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
DIN EN 14974 E : 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
PD CEN/TS 16368:2014 Lightweight Particleboards. Specifications
12/30254092 DC : 0 BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
UNI EN 14320-1 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
11/30252464 DC : 0 BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
I.S. EN 50632-2-11:2016 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-11: PARTICULAR REQUIREMENTS FOR JIG AND SABRE SAWS
DIN EN 14315-1:2013-04 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
I.S. EN 1457-1:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
16/30338243 DC BS EN 1457-2. Chimneys. Clay/ceramic flue liners. Part 2. Flue liners operating under wet conditions. Requirements and test methods
UNE-EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation
PREN 14322 : DRAFT 2014 WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
S.R. CEN TS 12872:2007 WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS
EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
PREN 13381-1 : DRAFT 2011 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
BS EN 492 : 2012 FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
S.R. CEN/TS 16526:2013 SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
DIN EN 1457-2:2016-10 (Draft) Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods; German and English version prEN 1457-2:2016
UNI EN 14319-1 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
PREN 17101 : DRAFT 2017 THERMAL INSULATION PRODUCTS FOR BUILDINGS - PU ADHESIVE FOAM FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS)
DIN EN 438-2:2016-06 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
UNI CEN/TS 16368 : 2014 LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
UNI EN 1457-2 : 2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
DIN EN 295-7:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 13069:2005 Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods
BS EN 335-3:1996 Hazard classes of wood and wood-based products against biological attack Application to wood-based panels
EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
EN 14964:2006 Rigid underlays for discontinuous roofing - Definitions and characteristics
EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 13964:2014 Suspended ceilings - Requirements and test methods
UNI EN 326-2 : 2014 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
UNI CEN/TS 16526 : 2014 SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 12871 : 2013 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
UNI EN 13238 : 2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES
UNI EN 1995-1-1 : 2014 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
EN 14974:2006+A1:2010 Facilities for users of roller sports equipment - Safety requirements and test methods
04/30111056 DC : DRAFT MARCH 2004 EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
I.S. EN 1995-1-1:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
14/30303732 DC : 0 BS EN 14322 - WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
BS EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the rigid foam dispensed system before installation
UNI EN 14315-1 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
UNI EN 14318-1 : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
PREN 295-7 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
09/30203166 DC : 0 BS EN 60745-2-11:2003/FP - HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS (JIG AND SABRE SAWS)
PD CEN/TS 16526:2013 Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics
BS EN 14318-1:2013 Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam dispensed system before installation
BS EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes
BS EN 50632-2-5:2016 Electric motor-operated tools. Dust measurement procedure Particular requirements for circular saws
15/30323616 DC : 0 BS EN 50632-2-17 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS
DIN EN 14318-1 E : 2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
BS EN 1457-2:2012 Chimneys. Clay/ceramic flue liners Flue liners operating under wet conditions. Requirements and test methods
DD ENV 13381-7:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to timber members
10/30217002 DC : 0 BS EN 295-7 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING
UNE-EN 438-2:2016 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties
16/30338240 DC BS EN 1457-1. Chimney. Clay/ceramic flue liners. Part 1. Flue liners operating under dry conditions. Requirements and test methods
NF EN 60745 2-11 : 2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS (JIG AND SABRE SAWS)
I.S. EN 13381-1:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
BS EN 14974 : 2006 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 438-2:2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
PREN 50632-2-5 : DRAFT 2015 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
PREN 50632-3-1 : DRAFT 2015 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 3-1: PARTICULAR REQUIREMENTS FOR TRANSPORTABLE TABLE SAWS
I.S. ENV 13381-7:2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS
EN 492:2012+A2:2018 Fibre-cement slates and fittings - Product specification and test methods
EN 50632-2-19:2016 Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers
UNE-EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
BS EN 1806:2006 Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods
BS EN 14322:2017 Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification
UNE-EN 1995-1-1:2016 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings.
BS EN 309:2005 Particleboards. Definition and classification
UNE-EN 13986:2006 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
UNE-EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation
EN 295-7:2013 Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation
EN 1457-1:2012 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
EN 326-2:2010+A1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
EN 14315-1:2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation
EN 309:2005 Particleboards - Definition and classification
EN 1457-2:2012 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
EN 14318-1:2013 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
EN 1806:2006 Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
08/30186620 DC : DRAFT OCT 2008 BS EN 13381-7 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS
DIN EN 14318-1:2013-04 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
15/30323619 DC : 0 BS EN 50632-2-19 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS
12/30266868 DC : 0 BS EN 16481 - TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHOD
DIN EN 14320-1 E : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION
DIN EN 14319-1:2013-04 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation
BS EN 14315-1:2013 Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam spray system before installation
04/30048871 DC : DRAFT MAY 2004 BS EN 14964 - ROOF COVERING PRODUCTS FOR DISCONTINUOUS LAYING AND PRODUCTS FOR WALL CLADDING - RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS
PREN 50632-2-17 : DRAFT 2015 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-17: PARTICULAR REQUIREMENTS FOR ROUTERS AND TRIMMERS
DIN EN 14319-1 E : 2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
UNE-EN 60745-2-11:2011 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
I.S. EN 14319-1:2013 THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
15/30315522 DC : 0 BS ISO 4586-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
15/30323607 DC : 0 BS EN 50632-2-5 - ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS
BS EN 1457-1:2012 Chimneys. Clay/ceramic flue liners Flue liners operating under dry conditions. Requirements and test methods
08/30171383 DC : DRAFT JUNE 2008 BS EN 12871 - WOOD-BASED PANELS - PERFORMANCE SPECIFICATIONS AND REQUIREMENTS FOR LOAD BEARING BOARDS FOR USE IN FLOORS, WALLS AND ROOFS
CEI EN 50632-2-5 : 1ED 2017 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS
ENV 13381-7:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
UNE-EN 14315-1:2013 Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane foam (PUR) products. Part 1: Specification for the rigid foam spray system before installation
UNE-EN 15101-1:2015 Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 13381-1:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
I.S. EN 14318-1:2013 THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION
ISO 4586-2:2015 High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties
PREN 50632-2-19 : DRAFT 2015 ELECTRIC MOTOR-OPERATED TOOLS - DUST MEASUREMENT PROCEDURE - PART 2-19: PARTICULAR REQUIREMENTS FOR JOINTERS
DIN EN 1457-1:2016-10 (Draft) Chimney - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods; German and English version prEN 1457-1:2016
UNI EN 14974 : 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
17/30353772 DC : 0 BS EN 17101 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - PU ADHESIVE FOAM FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS)
I.S. EN 14974:2006 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 326-2 E : 2000 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
DIN EN 1995-1-1 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
DIN EN 14322 E : 2017 WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
BS EN 13986 : 2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
UNE-EN 14322:2017 Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification
BS EN 13238:2010 Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
DIN EN 14974:2010-12 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
CEN/TS 14472-1:2003 Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General
DIN EN 326-2:2000-10 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL
EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
DIN EN 309:2005-04 Particleboards - Definition and classification
DIN EN 1457-1:2012-04 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
DIN EN 1457-2:2012-04 Chimneys - Clay/ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
CEN/TR 12872:2014 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
EN 14322:2017 Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification
UNE-EN 13986:2006+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

EN 326-3:2003 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
EN 321:2001 Wood-based panels - Determination of moisture resistance under cyclic test conditions
EN 319:1993 Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
EN 120:1992 Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method
EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
EN 1087-1:1995 Particleboards - Determination of moisture resistance - Part 1: Boil test
EN 326-1:1994 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
EN 322:1993 Wood-based panels - Determination of moisture content
EN 14755:2005 Extruded particleboards - Specifications
EN 326-2:2010+A1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 324-1:1993 Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length
ENV 1156:1998 Wood-based panels - Determination of duration of load and creep factors
EN 317:1993 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
EN 1058:2009 Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
EN 717-1:2004 Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
EN 789:2004 Timber structures - Test methods - Determination of mechanical properties of wood based panels
EN 324-2:1993 Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness
EN 323:1993 Wood-based panels - Determination of density
EN 12369-1:2001 Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
EN 15197:2007 Wood-based panels - Flaxboards - Specifications
EN 318:2002 Wood based panels - Determination of dimensional changes associated with changes in relative humidity
EN 335-3:1995 Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
EN 309:2005 Particleboards - Definition and classification
EN 311:2002 Wood-based panels - Surface soundness - Test method
ISO 3340:1976 Fibre building boards — Determination of sand content

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.