EN 397:2012+A1:2012
Current
Current
The latest, up-to-date edition.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Physical requirements
5 Performance requirements
6 Test requirements
7 Marking
Annex A (informative) - Recommendations for the
materials and construction of industrial
safety helmets
Annex B (informative) - Alternative procedure for
artificial ageing
Annex C (normative) - Test results - Uncertainty
of measurement
Annex D (informative) - Significant technical changes
between this European Standard and EN 397:1995
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 89/686/EEC Personal Protective Equipment
Bibliography
This European Standard specifies physical and performance requirements, methods of test and marking requirements for industrial safety helmets. The mandatory requirements apply to helmets for general use in industry. Additional optional performance requirements are included to apply only where specifically claimed by the helmet manufacturer. Industrial safety helmets are intended primarily to provide protection to the wearer against falling objects and consequential brain injury and skull fracture.
| Committee |
CEN/TC 158
|
| DevelopmentNote |
2012 Edition Re-Issued in October 2012 & incorporates AMD 1 2012. (11/2012) Supersedes UNE EN 397. (12/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| GOST EN 397 : 2012 | Identical |
| NBN EN 397 : 2012 + A1 2012 | Identical |
| NF EN 397 : 2012 + A1 2013 | Identical |
| NEN EN 397 : 2012 + A1 2012 | Identical |
| NS EN 397 : 2012 + A1 2012 | Identical |
| I.S. EN 397:2012 | Identical |
| PN EN 397 : 2012 + A1 2013 | Identical |
| SANS 1397 : 1ED 2003(R2010) | Identical |
| SN EN 397 : 2012 + A1 2013 | Identical |
| UNI EN 397 : 2013 | Identical |
| UNE-EN 397:2012+A1:2012 | Identical |
| BS EN 397 : 2012 | Identical |
| DIN EN 397:2013-04 | Identical |
| GOST R EN 397 : 2010 ERRATA 2012 | Identical |
| BS EN 397:2012+A1:2012 | Identical |
| DIN EN 14594:2005-07 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| 16/30319099 DC : 0 | BS ISO 18639-1 - PPE FOR FIREFIGHTERS UNDERTAKING SPECIFIC RESCUE ACTIVITIES - PART 1: GENERAL |
| I.S. EN 50365:2002 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| CEI EN 50365 : 2004 | ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS |
| BS EN 352-3:2002 | Hearing protectors. Safety requirements and testing Ear-muffs attached to an industrial safety helmet |
| EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| DIN EN 352-3:2003-04 | Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet |
| EN 12941:1998/A2:2008 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| NF EN 15333-2 : 2011 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| BS EN 15333-1:2008 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Demand apparatus |
| S.R. CWA 16106:2010 | PPE FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR, (CBRN) HAZARDS |
| S.R. CEN/TR 16149:2011 | GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS |
| PREN 14594 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 12941:2009-02 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 1486:2007 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| I.S. EN 14052:2012 | HIGH PERFORMANCE INDUSTRIAL HELMETS |
| I.S. EN 352-3:2002 | HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - EAR-MUFFS ATTACHED TO AN INDUSTRIAL SAFETY HELMET |
| I.S. EN 13819-1:2003 | HEARING PROTECTORS - TESTING - PART 1: PHYSICAL TEST METHODS |
| EN 13819-1:2002 | Hearing protectors - Testing - Part 1: Physical test methods |
| EN 352-3:2002 | Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet |
| I.S. EN 812:2012 | INDUSTRIAL BUMP CAPS |
| I.S. EN 271:1995 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE OR POWERED FRESH AIR HOSE BREATHING APPARATUS INCORPORATING A HOOD FOR USE IN ABRASIVE BLASTING OPERATIONS - REQUIREMENTS, TESTING, MARKING |
| BS EN 50365:2002 | Electrically insulating helmets for use on low voltage installations |
| PREN 12941 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING |
| NF EN 15333-1 : 2011 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| 07/30169528 DC : 0 | BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| 00/565107 DC : DRAFT NOV 2000 | BS EN 14052 - SPECIFICATION FOR HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS |
| UNI EN 15333-2 : 2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| UNI EN 15333-1 : 2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| I.S. EN 15333-1:2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| PREN 13819-1 : DRAFT 2018 | HEARING PROTECTORS - TESTING - PART 1: PHYSICAL TEST METHODS |
| DIN EN 1486:2008-04 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| DIN EN 812:2012-04 | INDUSTRIAL BUMP CAPS |
| UNI EN 12941 : 2009 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| UNI EN 14052 : 2013 | HIGH PERFORMANCE INDUSTRIAL HELMETS |
| UNI EN 1486 : 2008 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| UNI EN 812 : 2012 | INDUSTRIAL BUMP CAPS |
| 17/30348244 DC : 0 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| ONORM EN 14594 : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| BS EN 15333-2:2009 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Free flow apparatus |
| I.S. EN 12941:1998 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| DIN EN 15333-2:2009-07 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| 03/117128 DC : 0 | EN 1486 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
| 18/30367670 DC : 0 | BS EN 13819-1 - HEARING PROTECTORS - TESTING - PART 1: PHYSICAL TEST METHODS |
| PD CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| I.S. EN 14594:2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 15333-2:2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
| EN 14594:2018 | Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking |
| DIN EN 14052:2013-04 | High performance industrial helmets (includes Amendment A1:2012) |
| BS EN 271:1995 | Respiratory protective devices. Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations. Requirements, testing, marking |
| BS EN 14052 : 2012 | HIGH PERFORMANCE INDUSTRIAL HELMETS |
| BS EN 12941 : 1999 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| EN 15333-2:2009 | Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus |
| EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| EN 14052:2012+A1:2012 | High performance industrial helmets |
| EN 271:1995/AC:1997 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE OR POWERED FRESH AIR HOSE BREATHING APPARATUS INCORPORATING A HOOD FOR USE IN ABRASIVE BLASTING OPERATIONS - REQUIREMENTS, TESTING, MARKING |
| EN 812:2012 | Industrial bump caps |
| BS EN 14594:2005 | Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking |
| DIN EN 15333-1:2008-04 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| EI G9 GPG - SMALL SERVICE VESSELS : 2018 | GOOD PRACTICE GUIDELINE - THE SAFE MANAGEMENT OF SMALL SERVICE VESSELS USED IN THE OFFSHORE WIND INDUSTRY |
| DIN EN 352-3 E : 2003 | HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 3: EAR-MUFFS ATTACHED TO AN INDUSTRIAL SAFETY HELMET |
| DIN EN 14594 E : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| BS EN 1486:2007 | Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting |
| BS EN 812:2012 | Industrial bump caps |
| BS EN 13819-1:2002 | Hearing protectors. Testing Physical test methods |
| CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| EN 15333-1 : 2008/AC : 2009 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
| ISO 4892-1:2016 | Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| ISO 472:2013 | Plastics Vocabulary |
| ISO 4892-3:2016 | Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 960:2006 | Headforms for use in the testing of protective helmets |
| EN ISO 9185:2007 | Protective clothing - Assessment of resistance of materials to molten metal splash (ISO 9185:2007) |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| ISO 9185:2007 | Protective clothing — Assessment of resistance of materials to molten metal splash |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.