EN 422:2009
Current
The latest, up-to-date edition.
06-10-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
4.1 General hazards
4.2 Mechanical hazards related to power operated
movements during production
4.3 Additional hazards associated with machines of
specific design
4.3.1 Machines allowing whole body access
4.3.2 Rotary machines
4.4 Additional hazards when using ancillary equipment
5 Safety requirements and/or protective measures
5.1 General
5.1.1 Basic requirements
5.1.2 Safety distances
5.1.3 Emergency stop
5.1.4 Fluid systems
5.1.5 Safeguards
5.1.6 Movements caused by gravity
5.1.7 Electrical hazards and hazards due to
electromagnetic interference
5.1.8 Thermal hazards
5.1.9 Hazards due to harmful substances
5.1.10 Fire hazards
5.1.11 Hazards due to overpressure
5.1.12 Mechanical hazards during setting
5.2 Mechanical hazards related to power operated
movements during production
5.2.1 Basic requirements
5.2.2 Additional requirements
5.3 Additional hazards associated with machines of
specific design
5.3.1 Machines allowing whole body access
5.3.2 Rotary machines
5.4 Additional hazards when using ancillary equipment
6 Verification of safety requirements and/or protective
measures
7 Information for use
7.1 Instruction handbook
7.1.1 General
7.1.2 Safety-related components
7.1.3 Emergency stop
7.1.4 Thermal hazards
7.1.5 Exhaust systems
7.1.6 Fire hazard
7.1.7 Setting
7.1.8 Ancillary equipment
7.2 Marking
Annex A (normative) - Acknowledgement systems
A.1 Single acknowledgement system
A.2 Double acknowledgement system
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
2006/42/EC
This European Standard covers essential health and safety requirements for the design of blow moulding machines for the processing of plastics. The significant hazards inherent in blow moulding machines are listed in Clause 4.This European Standard does not cover dip blow moulding machines.This European Standard does not cover hazards due to the use of fluorine or other toxic fluids.The safety requirements for the interaction between blow moulding machines and ancillary equipment are stipulated. The technical safety requirements for the design of this equipment are not covered.This European Standard does not cover the requirements for the design of the exhaust system.The European Standard does not cover noise hazards.This European Standard is not applicable to blow moulding machines which are manufactured before the date of its publication as an EN. A transition period until 29 December 2009 is foreseen during which the manufacturer may choose to apply either this or the previous version of the standard.
| Committee |
CEN/TC 145
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 422:2009 | Identical |
| UNI EN 422 : 2009 | Identical |
| PN EN 422 : 2010 | Identical |
| BS EN 422:2009 | Identical |
| UNE-EN 422:2009 | Identical |
| NBN EN 422 : 2009 | Identical |
| SN EN 422 : 2009 | Identical |
| DIN EN 422:2009-10 | Identical |
| NS EN 422 : 2009 | Identical |
| NF EN 422 : 2009 | Identical |
| AS 4024.3201:2018 | Identical |
| NEN EN 422 : 2009 | Identical |
| PREN 415-1 : DRAFT 2011 | SAFETY OF PACKAGING MACHINES - PART 1: TERMINOLOGY AND CLASSIFICATION OF PACKAGING MACHINES AND ASSOCIATED EQUIPMENT |
| DIN EN 415-1:2014-10 | SAFETY OF PACKAGING MACHINES - PART 1: TERMINOLOGY AND CLASSIFICATION OF PACKING MACHINES AND ASSOCIATED EQUIPMENT |
| UNI EN 415-3 : 2010 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| I.S. EN 415-3:2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| DIN EN 415-1:2000-10 | SAFETY OF PACKAGING MACHINES - PART 1: TERMINOLOGY AND CLASSIFICATION OF PACKING MACHINES AND ASSOCIATED EQUIPMENT |
| EN 415-3:1999+A1:2009 | Safety of packaging machines - Part 3: Form, fill and seal machines |
| I.S. EN 415-1:2014 | SAFETY OF PACKAGING MACHINES - PART 1: TERMINOLOGY AND CLASSIFICATION OF PACKAGING MACHINES AND ASSOCIATED EQUIPMENT |
| 11/30249549 DC : 0 | BS EN 415-1 - SAFETY OF PACKAGING MACHINES - PART 1: TERMINOLOGY AND CLASSIFICATION OF PACKAGING MACHINES AND ASSOCIATED EQUIPMENT |
| UNI EN 415-1 : 2014 | SAFETY OF PACKAGING MACHINES - PART 1: TERMINOLOGY AND CLASSIFICATION OF PACKAGING MACHINES AND ASSOCIATED EQUIPMENT |
| DIN EN 415-3:2010-07 | Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009) |
| BS EN 415-3 : 2000 | SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES |
| UNE-EN 415-1:2014 | Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment |
| EN 415-1:2014 | Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment |
| BS EN 415-1:2014 | Safety of packaging machines Terminology and classification of packaging machines and associated equipment |
| UNE-EN 415-3:2000 | Safety of packaging machines. Part 3: Form, fill and seal machines. |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| IEC 61000-6-4:2006+AMD1:2010 CSV | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 61496-3:2001 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN ISO 12100-2:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| EN ISO 13732-3:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 13732-3:2005 | Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.