• There are no items in your cart

EN 442-2:2014

Current
Current

The latest, up-to-date edition.

Radiators and convectors - Part 2: Test methods and rating
Published date

12-10-2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and units
4 Selection of heating appliances to be tested
5 Equipment of laboratory and test methods
6 Test report
Annex A (normative) - Master radiators dimensional verification
Annex B (informative) - Determination of pressure drop
Annex C (normative) - Least squares regression for a model
Annex D (normative) - Analysis of test results by the method of least
        squares multiple regression
Annex E (normative) - Specimen of the test report
Annex F (informative) - Apparatus and method for checking the bulk
        temperature measuring devices
Annex G (informative) - Examples of typical appliances according to Table 4
Annex H (normative) - Determination of the (Phi[M]) values of the master
        radiators primary set
Annex I (normative) - Traceability of the thermal output measurement of
        radiators and convectors
Annex J (normative) - Calibration Procedure
Annex K (normative) - Pretreatment and paint testing method
Bibliography

This European Standard defines procedures for determining the standard thermal outputs and other characteristics of radiators and convectors installed in a permanent manner in construction works, fed with water or steam at temperatures below 120 °C, supplied by a remote energy source.This European Standard specifies the laboratory arrangements and testing methods to be adopted, the admissible tolerances, the criteria for selecting the samples to be tested and for verifying the conformity of the current production with the samples tested at the initial test.This European Standard also defines the additional common data that the manufacturer shall provide with the product in order to ensure the correct application of the products.This European Standard does not apply to fan assisted radiators, fan assisted convectors and trench convectors and to independent heating appliances.

Committee
CEN/TC 130
DevelopmentNote
Supersedes PREN 442-2. (12/2014)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
NF EN 442-2 : 2016 Identical
I.S. EN 442-2:2014 Identical
PN EN 442-2 : 2015 Identical
UNE-EN 442-2:2015 Identical
NBN EN 442-2 : 2015 Identical
NEN EN 442-2 : 2014 Identical
BS EN 442-2:2014 Identical
UNI EN 442-2 : 2004 Identical
NS EN 442-2 : 2014 Identical
DIN EN 442-2:2015-03 Identical
SN EN 442-2 : 1996 + A1 2000 Identical

DIN EN 16430-2 E : 2015 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT
DIN EN 1264-5:2009-01 Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output
DIN EN 16430-3 E : 2015 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 3: TEST METHOD AND RATING FOR COOLING CAPACITY
EN 1264-2:2008+A1:2012 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods
BS EN 12309-7:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Specific provisions for hybrid appliances
12/30261664 DC : DRAFT JULY 2012 BS EN 12309-7 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - SPECIFIC PROVISIONS FOR HYBRID APPLIANCES
BS EN 1264-5:2008 Water based surface embedded heating and cooling systems Heating and cooling surfaces embedded in floors, ceilings and walls. Determination of the thermal output
DIN EN 14336 E : 2005 HEATING SYSTEMS IN BUILDINGS - INSTALLATION AND COMMISSIONING OF WATER-BASED HEATING SYSTEMS
BS EN 442-3:2003 Specification for radiators and convectors Evaluation of conformity
DIN EN 12828:2003-06 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
DIN EN 442-3:2003-12 RADIATORS AND CONVECTORS - PART 3: EVALUATION OF CONFORMITY
EN 12309-7:2014 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 7: Specific provisions for hybrid appliances
BS EN 16430-3:2014 Fan assisted radiators, convectors and trench convectors Test method and rating for cooling capacity
I.S. EN 16430-2:2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT
DIN EN 12309-7:2015-03 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 7: SPECIFIC PROVISIONS FOR HYBRID APPLIANCES
10/30236545 DC : 0 BS EN 442-3 - RADIATORS AND CONVECTORS - PART 3: EVALUATION OF CONFORMITY
I.S. EN 16430-3:2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 3: TEST METHOD AND RATING FOR COOLING CAPACITY
DIN EN 14336:2005-01 Heating systems in buildings - Installation and commissioning of water based heating systems; German version EN 14336:2004
UNE-EN 442-1:2015 Radiators and convectors - Part 1: Technical specifications and requirements
I.S. EN 12828:2012 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
I.S. EN 834:2013 HEAT COST ALLOCATORS FOR THE DETERMINATION OF THE CONSUMPTION OF ROOM HEATING RADIATORS - APPLIANCES WITH ELECTRICAL ENERGY SUPPLY
I.S. EN 442-1:2014 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
I.S. EN 1264-2:2008 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS
I.S. EN 14037-2:2016 FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 2: PRE-FABRICATED CEILING MOUNTED RADIANT PANELS FOR SPACE HEATING - TEST METHOD FOR THERMAL OUTPUT
VDI 3805 Blatt 6:2015-07 Product data exchange in the building services - Radiators, heating and cooling convectors with or without fan
VDI 4650 Blatt 2:2013-01 Simplified method for the calculation of the annual heating energy ratio and the annual gas utilisation efficiency of sorption heat pumps - Gas heat pumps for space heating and domestic hot water
DIN EN 16430-2:2015-03 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT
11/30240282 DC : DRAFT MAR 2011 BS EN 12828 - HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
10/30227697 DC : 0 BS EN 834 - HEAT COST ALLOCATORS FOR THE DETERMINATION OF THE CONSUMPTION OF ROOM HEATING RADIATORS - APPLIANCES WITH ELECTRICAL ENERGY SUPPLY
DIN EN 12309-7 E : 2015 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 7: SPECIFIC PROVISIONS FOR HYBRID APPLIANCES
DIN EN 16430-1:2015-03 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
BS EN 16430-2:2014 Fan assisted radiators, convectors and trench convectors Test method and rating for thermal output
PREN 834 : DRAFT 2010 HEAT COST ALLOCATORS FOR THE DETERMINATION OF THE CONSUMPTION OF ROOM HEATING RADIATORS - APPLIANCES WITH ELECTRICAL ENERGY SUPPLY
UNE-EN 16430-1:2015 Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements
UNI EN 1264-2 : 2013 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS
DIN EN 16430-1 E : 2015 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
I.S. EN 1264-5:2008 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 5: HEATING AND COOLING SURFACES EMBEDDED IN FLOORS, CEILINGS AND WALLS - DETERMINATION OF THE THERMAL OUTPUT
UNI EN 834 : 2013 HEAT COST ALLOCATORS FOR THE DETERMINATION OF THE CONSUMPTION OF ROOM HEATING RADIATORS - APPLIANCES WITH ELECTRICAL ENERGY SUPPLY
UNI EN 12828 : 2014 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
14/30309947 DC : 0 BS EN 15316-2 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING)
12/30255711 DC : 0 BS EN 16430-1 - FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
PREN 442-3 : DRAFT 2010 RADIATORS AND CONVECTORS - PART 3: EVALUATION OF CONFORMITY
15/30324907 DC : 0 BS EN 14037-2 - FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 2: PRE-FABRICATED CEILING MOUNTED RADIANT PANELS FOR SPACE HEATING - TEST METHOD FOR THERMAL OUTPUT
UNE-EN 16430-2:2015 Fan assisted radiators, convectors and trench convectors - Part 2: Test method and rating for thermal output
I.S. EN 12309-7:2014 GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 7: SPECIFIC PROVISIONS FOR HYBRID APPLIANCES
I.S. EN 16430-1:2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
PREN 14037-2 : DRAFT 2015 FREE HANGING HEATING AND COOLING SURFACES FOR WATER WITH A TEMPERATURE BELOW 120 DEGREES C - PART 2: PRE-FABRICATED CEILING MOUNTED RADIANT PANELS FOR SPACE HEATING - TEST METHOD FOR THERMAL OUTPUT
UNE-EN 16430-3:2015 Fan assisted radiators, convectors and trench convectors - Part 3: Test method and rating for cooling capacity
DIN EN 12828:2014-07 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
DIN EN 442-1:2015-03 RADIATORS AND CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
DIN EN 1264-2:2013-03 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods (includes Amendment A1:2012)
BS EN 442-1:2014 Radiators and convectors Technical specifications and requirements
BS EN 1264-2 : 2008 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING: PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT USING CALCULATION AND TEST METHODS
UNE-EN 14037-2:2017 Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output
BS EN 14037-2:2016 Free hanging heating and cooling surfaces for water with a temperature below 120°C Pre-fabricated ceiling mounted radiant panels for space heating. Test method for thermal output
BS EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply
DIN EN 442-3:1997-08 RADIATORS AND CONVECTORS - PART 3: EVALUATION OF CONFORMITY
EN 16430-1 : 2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
EN 14336:2004 Heating systems in buildings - Installation and commissioning of water based heating systems
EN 16430-2 : 2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT
EN 16430-3 : 2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 3: TEST METHOD AND RATING FOR COOLING CAPACITY
EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
EN 14037-2:2016 (edition 2) Free hanging heating and cooling surfaces for water with a temperature below 120C - Part 2: Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output
EN 442-3:2003 Radiators and convectors - Part 3: Evaluation of conformity
EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements
UNI EN 1264-5 : 2009 WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 5: HEATING AND COOLING SURFACES EMBEDDED IN FLOORS, CEILINGS AND WALLS - DETERMINATION OF THE THERMAL OUTPUT
BS EN 16430-1:2014 Fan assisted radiators, convectors and trench convectors Technical specifications and requirements
I.S. EN 442-3:2003 RADIATORS AND CONVECTORS - PART 3: EVALUATION OF CONFORMITY
EN 1264-5:2008 Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output
12/30255717 DC : 0 BS EN 16430-3 - FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 3: TEST METHOD AND RATING FOR COOLING CAPACITY
DIN EN 16430-3:2015-03 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 3: TEST METHOD AND RATING FOR COOLING CAPACITY
12/30255714 DC : 0 BS EN 16430-2 - FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 2: TEST METHOD AND RATING FOR THERMAL OUTPUT
07/30158874 DC : 0 BS EN 1264-2 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 2: FLOOR HEATING - PROVE METHODS FOR THE DETERMINATION OF THE THERMAL OUTPUT OF FLOOR HEATING SYSTEMS USING CALCULATION AND TEST METHODS
EN 834:2013/AC:2015 HEAT COST ALLOCATORS FOR THE DETERMINATION OF THE CONSUMPTION OF ROOM HEATING RADIATORS - APPLIANCES WITH ELECTRICAL ENERGY SUPPLY
BS EN 12828 : 2012 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
BS EN 14336:2004 Heating systems in buildings. Installation and commissioning of water based heating systems
UNE-EN 1264-2:2009 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
EN 442-1:2014 Radiators and convectors - Part 1: Technical specifications and requirements
ISO 16269-7:2001 Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.