EN 50083-8:2013
Current
Current
The latest, up-to-date edition.
CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS
Published date
12-20-2013
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Methods of measurement
5 Performance requirements
Annex A (informative) - A-deviations
Annex B (informative) - Frequency ranges of typical
safety of life services
Annex C (informative) - Interdependence between the
maximum allowable field strength and the
minimum signal level at system outlet
Annex D (informative) - Measurements in other
distances than the standard distance of 3 m
Annex E (informative) - GPS based leakage
detection system for cable networks
Bibliography
Pertains to the radiation characteristics and immunity to electromagnetic disturbance of cable networks for television signals, sound signals and interactive services and covers the frequency range 0,15 MHz to 3,5 GHz.
| Committee |
TC 209
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 50083-8 : 2014 | Identical |
| BS EN 50083-8:2013 | Identical |
| I.S. EN 50083-8:2013 | Identical |
| NBN EN 50083-8 : 2014 | Identical |
| NF EN 50083-8 : 2014 | Identical |
| VDE 0855-8 : 2014 | Identical |
| CEI EN 50083-8 : 2014 | Identical |
| NEN EN 50083-8 : 2014 | Identical |
| PN EN 50083-8 : 2014 | Identical |
| SN EN 50083-8 : 2013 | Identical |
| UNE-EN 50083-8:2003 | Identical |
| UNE-EN 50083-8:2014 | Identical |
| BS EN IEC 60512-15-2:2018 | Identical |
| BS EN 50529-2:2010 | EMC network standard Wire-line telecommunications networks using coaxial cables |
| CLC/TS 50217:2005 | Guide for in situ measurements - In situ measurement of disturbance emission |
| CEI EN 50083-9 : 2003 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 9: INTERFACES FOR CATV/SMATV HEADENDS AND SIMILAR PROFESSIONAL EQUIPMENT FOR DVB/MPEG-2 TRANSPORT STREAMS |
| S.R. CLC/TR 50083-10-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS |
| UNE-EN 50083-2:2013 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
| EN 50083-9:2002 | Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| CEI CWA 50487 : 2006 | SMARTHOUSE CODE OF PRACTICE |
| BS EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services System performance of forward paths |
| DD CLC/TS 50217:2005 | Guide for in situ measurements. In situ measurement of disturbance emission |
| I.S. EN 50083-10:2002 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS |
| TR 103 182 : 1.1.1 | INTEGRATED BROADBAND CABLE TELECOMMUNICATION NETWORKS (CABLE); CHARACTERISTICS OF EVOLVING ELECTROMAGNETIC ENVIRONMENT WITH ECN800 PARAMETERS AND CABLE NETWORK EQUIPMENT |
| I.S. EN 60728-101:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY |
| CEI EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| EG 202 306 : 1.2.1 | TRANSMISSION AND MULTIPLEXING (TM); ACCESS NETWORKS FOR RESIDENTIAL CUSTOMERS |
| I.S. CLC/TS 50217:2005 | GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION |
| EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| I.S. EN 50529-2:2010 | EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES |
| UNE-EN 50083-10:2003 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
| EN 50083-10:2002 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
| BS EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services System performance for return paths |
| PD CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services Guidelines for the implementation of return paths in cable networks |
| BS EN 50083-10:1999 | Cabled distribution systems for television and sound signals System performance for return paths |
| BS EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| 02/204840 DC : DRAFT APR 2002 | PREN 50217 - IN SITU MEASUREMENTS OF DISTURBANCE EMISSION |
| CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks |
| I.S. EN 50083-9:2003 | CABLES NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 9: INTERFACES FOR CATV/SMATV HEADENDS AND SIMILAR PROFESSIONAL EQUIPMENT FOR DVB/MPEG-2 TRANSPORT STREAMS |
| I.S. EN 50083-2:2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| BS EN 50083-9:2002 | Cabled distribution systems for television and sound signals Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| CEI EN 50529-2 : 2013 | EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES |
| EN 60728-101:2017/AC:2017-07 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY (IEC 60728-101:2016) |
| I.S. EN 50173-4:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| I.S. EN 60728-10:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS |
| TR 102 864 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); ASSESSMENT OF CABLE EQUIPMENT WITH DIGITAL DIVIDEND; NEW ELECTRONIC COMMUNICATION NETWORKS (ECN) OPERATING IN THE UHF BAND 790 MHZ TO 862 MHZ |
| BS EN 50173-4 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| I.S. EN 60728-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS |
| EN 50529-2:2010 | EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables |
| EN 60966-2-4:2016 | Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors |
| CISPR 13:2009+AMD1:2015 CSV | Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics - Limits and methods of measurement |
| EN 55013:2013/A1:2016 | SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 13:2009, MODIFIED) |
| EN 55016-1-4:2010/A2:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-4: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNAS AND TEST SITES FOR RADIATED DISTURBANCE MEASUREMENTS (CISPR 16-1-4:2010/A2:2017) |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
| IEC 60966-2-6:2016 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| EN 60966-2-6:2017 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors |
| EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| IEC 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 50529-2:2010 | EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables |
| EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| IEC 60966-2-5:2016 | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors |
| IEC 60966-2-4:2016 | Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors |
| EN 60966-2-5:2017 | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors |
| EN 61169-2:2007 | Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
| IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| IEC 61169-2:2007 | Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
| EN 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) |
| EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.