• There are no items in your cart

EN 549:1994

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Rubber materials for seals and diaphragms for gas appliances and gas equipment
Superseded date

07-03-2019

Published date

11-22-1994

Foreword
Introduction
1. Scope
2. Normative references
3. Definitions
4. Manufacturer's declared information
5. Classification
6. Requirements
7. Test methods
Annex
A. (normative) Verification of components by physical
     and chemical testing
B. (normative) Verification of components by infra-red
     spectrometric method

This standard specifies requirements and associated test methods for vulcanized rubber materials used in gas appliances and equipment in contact with 1st, 2nd and 3rd family combustible gases. It also establishes a classification based on temperature range and hardness. This standard is applicable to materials from which are manufactured homogeneous seals and homogeneous or reinforced diaphragms. The normal range of operating temperatures covered by this standard is 0 øC to + 60 øC. Tests are also included for applications using diaphragms within the range - 20 øC to + 80 øC and seals within the range - 20 øC to + 150 øC. For temperatures outside these ranges the user should contact the manufacturer regarding the suitability of the rubber material. This standard includes two normative annexes for the verification that a component (finished product) was produced from a previously type tested material complying with requirements of this standard as declared by the appliance or equipment manufacturer or supplier of the component. This standard is not applicable to silicone rubber used either above 200 mbar nominal pressure or at temperatures below 0 øC with 3rd family gases as there is possibility of condensation. This standard is also not applicable to seals and diaphragms for devices in gas transmission systems nor in such equipment used in 1st and 2nd family gas distribution systems.

Committee
CEN/TC 208
DevelopmentNote
Supersedes EN 278, EN 279 & EN 291. (08/2012)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
DS EN 549 : 1995 Identical
ONORM EN 549 : 1995 Identical
DIN EN 549:1995-04 Identical
I.S. EN 549:1995 Identical
UNE-EN 549:1996 Identical
NBN EN 549 : 1995 Identical
NF EN 549 : 1995 Identical
NS EN 549 : 1ED 1995 Identical
PN EN 549 : 2000 Identical
SN EN 549 : 1995 Identical
NEN EN 549 : 1995 Identical
BS EN 549:1995 Identical
UNI EN 549 : 1996 Identical

I.S. EN 16125:2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
13/30281974 DC : 0 BS EN 16617 - PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
15/30320783 DC : 0 BS EN 1439 - LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
DIN EN 1254-8:2012-12 Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes
DIN EN 14829:2007-11 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
I.S. EN 13152:2002 SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - SELF CLOSING
02/711303 DC : DRAFT SEP 2002 PREN 14543 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PATIO HEATERS - LPG FLUELESS PATIO HEATERS FOR OUTDOOR AND VENTILATED AREA USE
13/30279702 DC : 0 BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
12/30254959 DC : 0 BS EN 89 - GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN ISO 15995:2010-11 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
ONORM EN 521 : 2006 SPECIFICATIONS FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006)
99/718298 DC : DRAFT DEC 1999 PREN 13785 - REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100KGH
PREN 14141 : DRAFT 2011 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
PREN 14129 : DRAFT 2011 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
01/706620 DC : DRAFT APR 2001 PREN 14129 - PRESSURE RELIEF VALVES FOR LPG TANKS
BS EN 16617:2015 Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
BS EN ISO 14245:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing
DIN EN 16617:2015-07 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
10/30227668 DC : 0 BS EN 14678-3 - LPG EQUIPMENT AND ACCESSORIES - PART 3: REFUELLING INSTALLATIONS AT PRIVATE AND INDUSTRIAL PREMISES
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN ISO 14245:2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
12/30250279 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
13/30287842 DC : 0 BS EN 14543 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
BS EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
I.S. EN 14678-3:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
PREN 624 : DRAFT 2009 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
UNI EN 13175 : 2015 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
I.S. EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
PREN 54-7 : DRAFT 2015 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION
UNE-EN 16678:2016 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
UNE-EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
BS EN 521:2006 Specifications for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances
EN 15202:2012 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
I.S. EN 15202:2012 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
EN 461:1999/A1:2004 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - FLUELESS NON-DOMESTIC SPACE HEATERS NOT EXCEEDING 10 KW
DIN EN 15033 E : 2007 ROOM SEALED STORAGE WATER HEATERS FOR THE PRODUCTION OF SANITARY HOT WATER USING LPG FOR VEHICLES AND BOATS
DIN EN 26:2015-08 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 14678-2:2012-04 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements (includes Amendment A1:2012)
BS EN 13785 : 2005 REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN 449 : 2002 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - DOMESTIC FLUELESS SPACE HEATERS (INCLUDING DIFFUSIVE CATALYTIC COMBUSTION HEATERS)
BS EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
BS EN 624:2011 Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 12806:2003 Automotive liquefied petroleum gas components. Other than containers
DIN EN 15266 E : 2007 STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
BS EN 13786 : 2004 AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNE-EN 331:2016 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
BS EN 14678-2 : 2007 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
BS EN 15202:2012 LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
BS EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
BS EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions
I.S. EN 14678-2:2007 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
DIN EN 13152:2003-09 SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
I.S. EN 89:2015 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 13787:2002-04 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 15033:2007-02 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
DIN EN 1439:2017-10 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
DIN EN 14800:2007-06 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
DIN EN 14543:2017-10 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
EN 13153 : 2001 AMD 1 2003 SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
EN 30-1-1:2008+A3:2013 Domestic cooking appliances burning gas - Part 1-1: Safety - General
I.S. EN 13760:2003 AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS
EN 12806:2003 Automotive liquefied petroleum gas components - Other than containers
EN 12864:2001/A3:2009 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
DIN EN 521:2006-05 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
EN 15033:2006/AC:2008 ROOM SEALED STORAGE WATER HEATERS FOR THE PRODUCTION OF SANITARY HOT WATER USING LPG FOR VEHICLES AND BOATS
PREN 14543 : DRAFT 2013 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
PREN 13774 : DRAFT 2011 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
DIN EN 16119:2013-05 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
05/30135987 DC : 0 EN 161 - AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES
DIN EN ISO 14245:2010-11 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
DIN EN 14678-3:2013-03 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
13/30286091 DC : 0 BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
I.S. EN 483:2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
99/716445 DC : DRAFT NOV 99 AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR
I.S. EN 12864:2001 LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
08/30167437 DC : DRAFT JAN 2008 BS EN ISO 28622 - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
13/30248693 DC : 0 BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
DIN EN 14829 E : 2007 INDEPENDENT GAS-FIRED FLUELESS SPACE HEATERS FOR NOMINAL HEAT INPUT NOT EXCEEDING 6 KW
12/30265334 DC : 0 BS EN 13953 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
06/30148043 DC : 0 EN 88-2 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR
PREN 16129 : DRAFT 2010 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
11/30248684 DC : 0 BS EN 14129 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
04/30126871 DC : DRAFT DEC 2004 ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS
05/30125032 DC : DRAFT JUL 2005 EN 14678-2 - LPG EQUIPMENT AND ACCESSORIES - EQUIPMENT FOR LIQUEFIED PETROLEUM GAS AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS, AND INSTALLATION REQUIREMENTS
17/30362705 DC : 0 BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
BS EN 14678-3:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises
BS EN 1254-8:2012 Copper and copper alloys. Plumbing fittings Fittings with press ends for use with plastics and multilayer pipes
UNI EN 16119 : 2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
05/30136930 DC : DRAFT JUL 2005 EN 521 - SPECIFICATIONS FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
00/717229 DC : DRAFT NOV 2000 PREN 14071 - PRESSURE RELIEF VALVES FOR LPG TANKS - ANCILLARY EQUIPMENT
PREN 89 : DRAFT 2012 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
ISO 15995:2006 Gas cylinders Specifications and testing of LPG cylinder valves Manually operated
I.S. EN 14071:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
I.S. EN 16617:2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
BS EN 13175:2014 LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
PREN 30-1-1 : DRAFT 2017 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
I.S. EN 14829:2007 INDEPENDENT GAS-FIRED FLUELESS SPACE HEATERS FOR NOMINAL HEAT INPUT NOT EXCEEDING 6 KW
UNE-EN 14678-2:2009 LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements
UNE-EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
PREN 50465 : DRAFT 2011 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
BS EN 14071:2015 LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment
EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
EN 521:2006 Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances
EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
DIN EN 12252:2014-07 LPG equipment and accessories - Equipping of LPG road tankers
DIN EN 1359:2007-06 GAS METERS - DIAPHRAGM GAS METERS
DIN EN 12864:2006-03 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 89:2015-08 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 15266:2007-08 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
BS EN 26:1998 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
UNE-EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
17/30362889 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
04/30124785 DC : 0 EN 15069 - SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
I.S. EN 624:2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
I.S. EN 30-1-1:2008 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
DIN EN 12864 E : 2006 AMD 3 2010 LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
I.S. EN 13774:2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
DIN EN 13153:2003-09 SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
I.S. EN 13953:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
I.S. EN 13799:2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
I.S. EN 449:2002 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - DOMESTIC FLUELESS SPACE HEATERS (INCLUDING DIFFUSIVE CATALYTIC COMBUSTION HEATERS)
I.S. EN 14129:2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 331:2015 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN 14543:2017 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
I.S. EN 26:2015 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
I.S. EN 1359:2017 GAS METERS - DIAPHRAGM GAS METERS
DIN EN 12252:2000-10 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 14141:2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN 13787:2002 ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 12252:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
DIN EN 13760:2003-11 Automotive LPG filling system for light and heavy duty vehicles - Nozzle; Test requirements and dimensions
I.S. EN 88-2:2007 PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR
I.S. EN 12806:2003 AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS
PREN 13953 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
PREN 521 : DRAFT 2016 SPECIFICATIONS FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
04/30124766 DC : DRAFT NOV 2004 EN 15033 - ROOM SEALED STORAGE WATER HEATERS FOR THE PRODUCTION OF SANITARY HOT WATER USING LPG VEHICLES AND BOATS
DIN EN 16678 E : 2016 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
10/30228056 DC : 0
EN ISO 14245:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006)
10/30218988 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS
BS EN 14829:2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
14/30304116 DC : 0 BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS
09/30205570 DC : 0 BS EN 13799 - LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS
BS EN ISO 15995:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated
PREN 1439 : DRAFT 2015 LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
10/30231853 DC : DRAFT SEP 2010 BS EN 10352 - STAINLESS STEEL PLUMBING FITTINGS - FITTINGS WITH PRESS ENDS FOR METALLIC TUBES
07/30163618 DC : 0 BS EN 1254-2 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES
11/30213590 DC : 0 BS EN 1254-8 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES
UNI EN 1254-8 : 2012 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES
UNE-EN 16129:2014 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
15/30325369 DC : 0 BS EN 484 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE
PREN 26 : DRAFT 2012 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
ISO 14245:2006 Gas cylinders Specifications and testing of LPG cylinder valves Self-closing
UNI EN 14678-3 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
PREN 1359 : DRAFT 2014 GAS METERS - DIAPHRAGM GAS METERS
DIN EN 521:2016-03 (Draft) SPECIFICATIONS FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 14800 E : 2007 CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS
DIN EN 14141:2013-08 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
DIN EN 331:2016-04 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
DIN EN 13786:2010-07 AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 13785:2010-05 REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 14543 E : 2017 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
DIN EN 14543:2013-11 (Draft) SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
BS EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNE-EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
UNI EN 15202 : 2012 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
EN 449:2002+A1:2007 Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters)
UNI EN 13799 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNI EN 624 : 2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 13774 : 2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
EN 483:1999/A4:2007 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
UNI EN 14141 : 2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNI EN 15069 : 2009 SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL
UNI EN 14800 : 2007 CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 14129 : 2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
UNI EN 12864 : 2010 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 14678-2 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 12252 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
UNI EN 13786 : 2009 AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 13785 : 2009 REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
UNI EN 16129 : 2013 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
BS ISO 15995:2006 Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated
10/30218991 DC : 0 BS EN 16119 - LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR CYLINDER AND TANK VALVES - SPECIFICATION AND TESTING
PREN 484 : DRAFT 2015 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 16678:2015 Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
I.S. EN 13153:2002 SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
UNE-EN 1254-8:2013 Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes
04/30111048 DC : 0 EN 88-2 - PRESSURE GOVERNORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2 - PRESSURE GOVERNORS FOR INLET PRESSURES BETWEEN 0.5 BAR AND 5 BAR
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
14/30300117 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
11/30248438 DC : 0 BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
05/30125303 DC : DRAFT APR 2005 BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
12/30266928 DC : 0 BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
PREN 16617 : DRAFT 2013 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
12/30254956 DC : 0 BS EN 26 - GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
13/30281067 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
12/30258236 DC : 0 BS EN 10358 - UNALLOYED STEEL PLUMBING FITTINGS - FITTINGS WITH PRESS ENDS FOR UNALLOYED STEEL TUBES
EN 1254-8:2012 Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes
UNE-EN 13175:2015 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
08/30180918 DC : DRAFT JULY 2008 BS EN 1854 - PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
BS ISO 14245:2006 Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing
DIN EN 16125:2016-03 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
UNE-EN 16617:2015 Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking
UNI EN ISO 15995 : 2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
PREN 331 : DRAFT 2013 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
ISO 17484-1:2014 Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
15/30296472 DC : 0 BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
16/30334721 DC : 0 BS EN 521 - SPECIFICATIONS FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
PREN 13799 : DRAFT 2009 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS
PREN 14893 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN ISO 15995:2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
DIN EN 15069 E : 2010 SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL
DIN EN 13953:2015-05 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
DIN EN 14129:2014-05 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
DIN EN 88-2:2008-03 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
DIN EN 13774:2013-05 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
DIN EN 13799:2012-06 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
04/30124829 DC : 0 EN 15070 - STRIP WOUND FLEXIBLE SAFETY METALLIC HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS
BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
BS EN 14129:2014 LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels
BS EN 10284:2000 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
DIN EN 15202 E : 2012 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
BS EN 15033:2006 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
UNE-EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
BS EN 13799:2012 LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
UNE-EN 1439:2017 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
BS EN 12864 : 2001 LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
DIN EN 15069:2010-07 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
UNE-EN 30-1-1:2009 Domestic cooking appliances burning gas - Part 1-1: Safety - General
BS EN 483 : 2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
BS EN 13152:2002 Specification and testing of LPG cylinder valves. Self closing
UNE-EN 15202:2012 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
UNE-EN 14543:2006 Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use
BS EN 13953:2015 LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
UNE-EN 89:2016 Gas-fired storage water heaters for the production of domestic hot water
UNE-EN 26:2016 Gas-fired instantaneous water heaters for the production of domestic hot water
BS EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
UNE-EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN 15266:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
EN 14543:2017 Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use
EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 13786:2004+A1:2008 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
EN 16678:2015 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
EN 13785:2005+A1:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
EN 14678-2:2007+A1:2012 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements
EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
EN 1359:2017 Gas meters - Diaphragm gas meters
EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN 14829:2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
EN 16617 : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
EN 331:2015 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
PREN 12252 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
UNE-EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
UNI EN ISO 14245 : 2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
10/30218994 DC : 0 BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
PREN 88-2 : DRAFT 2014 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 50 KPA UP TO AND INCLUDING 500 KPA AND ASSOCIATED SAFETY DEVICES
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 16119:2013 LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing
BS EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
11/30243885 DC : 0 BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
11/30249911 DC : 0 BS EN 50465 - GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
18/30321883 DC : 0 BS EN ISO 15995 - GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
09/30201902 DC : 0 BS EN 624 - SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
DIN EN 16129:2013-08 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
I.S. EN 16119:2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
BS ISO 17484-1:2014 Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Specifications for systems
06/19977015 DC : DRAFT JULY 2006 BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES
11/30237753 DC : 0 BS ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR (500 KPA) - PART 1: SPECIFICATIONS FOR SYSTEMS
UNE-EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
04/30095590 DC : 0 EN 1254-7 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 7: FITTINGS WITH PRESS ENDS FOR METALLIC TUBES
DIN EN 16617 E : 2015 PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING
DIN EN 16678:2016-02 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
DIN EN 1439:2015-10 (Draft) LPG EQUIPMENT AND ACCESSORIES - PROCEDURE FOR CHECKING TRANSPORTABLE REFILLABLE LPG CYLINDERS BEFORE, DURING AND AFTER FILLING
UNE-EN 15266:2008 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
I.S. EN 1254-8:2012 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 8: FITTINGS WITH PRESS ENDS FOR USE WITH PLASTICS AND MULTILAYER PIPES
I.S. EN 16129:2013 PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
I.S. EN 521:2006 SPECIFICATIONS FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
I.S. EN 16678:2015 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
DIN EN 13175:2015-02 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
DIN EN 14071:2015-08 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 624:2011-10 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN 30-1-1:2013-06 Domestic cooking appliances burning gas - Part 1-1: Safety - General (includes Amendment 1:2013)
BS EN 14543:2017 Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use
BS EN 13090:2000 Means for resealing threaded joints of gas pipework in buildings
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
BS EN 1439:2017 LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling
BS EN 1359:2017 Gas meters. Diaphragm gas meters
BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
BS EN 461:1999 Specification for dedicated liquefied petroluem gas appliances. Flueless non-domestic space heaters not exceeding 10 kW
BS EN 30-1-1 : 2008 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
BS EN 13153:2002 Specification and testing of LPG cylinder valves. Manually operated
EN 10284:2000 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
EN 13090:2000 Means for resealing threaded joints of gas pipework in buildings
DIN EN 15202:2012-09 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
EN 12252:2014 LPG equipment and accessories - Equipping of LPG road tankers
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
DIN EN 449:2008-03 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - DOMESTIC FLUELESS SPACE HEATERS (INCLUDING DIFFUSIVE CATALYTIC COMBUSTION HEATERS)
UNI EN 30-1-1 : 2013 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
EN 13152:2001/A1:2003 SPECIFICATION AND TESTING OF LPG CYLINDER VALVES - SELF CLOSING
UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
ISO 1431-1:2012 Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD) Determination of hardness
ISO 1407:2011 Rubber — Determination of solvent extract
ISO 4648:1991 Rubber, vulcanized or thermoplastic Determination of dimensions of test pieces and products for test purposes
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 471:1995 Rubber Temperatures, humidities and times for conditioning and testing
ISO 247:2006 Rubber Determination of ash
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
ISO 4650:2012 Rubber — Identification — Infrared spectrometric methods

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.