EN 60567:2011
Current
Current
The latest, up-to-date edition.
OIL-FILLED ELECTRICAL EQUIPMENT - SAMPLING OF GASES AND ANALYSIS OF FREE AND DISSOLVED GASES - GUIDANCE (IEC 60567:2011)
Published date
12-16-2011
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Sampling of gases from gas-collecting
(Buchholz) relays
4 Labelling of gas samples
5 Sampling, labelling and transferring
of oil from oil-filled equipment
6 Preparation of gas-in-oil standards
7 Extraction of gases from oil
8 Gas analysis by gas-solid chromatography
9 Quality control
10 Report of results
Annex A (informative) - Correction for incomplete gas
extraction in partial degassing method by
calculation
Annex B (informative) - Mercury-free and shake test
versions of the standard extraction methods
Annex C (informative) - Preparation of air-saturated
standards
Annex D (informative) - Correction for gas bubbles
in syringes and air gap in rigid bottles
Annex E (informative) - Procedure for comparing gas
monitor readings to laboratory results
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Specifies the techniques for sampling free gases from gas-collecting relays from power transformers.
| Committee |
SR 10
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 60567 : 2012 | Identical |
| SN EN 60567 : 2005 | Identical |
| SS-EN 60567 : 2012 | Identical |
| IEC 60567:2011 | Identical |
| PN EN 60567 : 2012 | Identical |
| CEI EN 60567 : 2012 | Identical |
| NBN EN 60567 : 2012 | Identical |
| NEN EN IEC 60567 : 2012 | Identical |
| BS EN 60567:2011 | Identical |
| UNE-EN 60567:2012 | Identical |
| VDE 0370-9 : 2012 | Identical |
| DIN EN 60567 : 2012 | Identical |
| I.S. EN 60567:2011 | Identical |
| DS EN 60567 : 2012 | Identical |
| DIN EN 61198 : 1995 | MINERAL INSULATING OILS - METHODS FOR THE DETERMINATION OF 2-FURFURAL AND RELATED COMPOUNDS |
| BS EN 61869-1:2009 | Instrument transformers General requirements |
| BS EN 60814:1998 | Insulating liquids. Oil-impregnated paper and pressboard. Determination of water by automatic coulometric Karl Fischer titration |
| 98/202856 DC : 0 | PREN 60044-1 - INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| VDE 0380-6 : 1995 | MINERAL INSULATING OILS - METHODS FOR THE DETERMINATION OF 2-FURFUROL AND RELATED COMPOUNDS |
| UNE-EN 60475:2013 | Method of sampling insulating liquids |
| S.R. CLC/TR 50503:2010 | GUIDELINES FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS |
| CEI EN 61378-2 : 2002 | CONVERTOR TRANSFORMERS - PART 2: TRANSFORMERS FOR HVDC APPLICATIONS |
| I.S. EN 61181:2007 | MINERAL OIL-FILLED ELECTRICAL EQUIPMENT - APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TESTS ON ELECTRICAL EQUIPMENT (IEC 61181:2007 (EQV)) |
| VDE 0375-2 : 1995 | SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES - GUIDE FOR MAINTENANCE OF TRANSFORMER ESTERS IN EQUIPMENT |
| EN 62535:2009 | Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
| EN 62021-2 : 2007 | INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION |
| BS EN 60044-1:1999 | Instrument transformers Current transformers |
| BS EN 60475:2011 | Method of sampling insulating liquids |
| CEI EN 60475 : 2012 | METHOD OF SAMPLING INSULATING LIQUIDS |
| I.S. EN 61203:1995 | SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES - GUIDE FOR MAINTENANCE OF TRANSFORMER ESTERS IN EQUIPMENT |
| I.S. EN 62146-1:2014 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL |
| I.S. EN 61198:1994 | MINERAL INSULATING OILS - METHODS FOR THE DETERMINATION OF 2-FURFURAL AND RELATED COMPOUNDS |
| I.S. EN 62535:2009 | INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULPHUR IN USED AND UNUSED INSULATING OIL |
| I.S. EN 62021-2:2007 | INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION |
| VDE 0532-42 : 2001 | CONVERTOR TRANSFORMERS - PART 2: TRANSFORMERS FOR HVDC APPLICATIONS |
| DIN EN 60814 : 1999 | INSULATING LIQUIDS - OIL-IMPREGNATED PAPER AND PRESSBOARD - DETERMINATION OF WATER BY AUTOMATIC COULOMETRIC KARL FISCHER TITRATION |
| VDE 0370-20 : 1999 | OIL-IMPREGNATIED PAPER AND PRESSBOARD - DETERMINATION OF WATER BY AUTOMATIC COULOMETRIC KARL FISCHER TITRATION |
| 05/30133366 DC : DRAFT MAY 2005 | EN 5XXXX BTTF 116-1 - STANDARD FOR THE INVENTORY, CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS |
| 06/30159746 DC : 0 | BS EN 50503 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - STANDARD FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS |
| 07/30168341 DC : DRAFT AUG 2007 | BS EN 62535 - INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULFUR IN USED AND UNUSED INSULATING OIL |
| BS EN 60599:2016 | Mineral oil-filled electrical equipment in service. Guidance on the interpretation of dissolved and free gases analysis |
| BS EN 62146-1 : 2014 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013) |
| I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60475:2011 | METHOD OF SAMPLING INSULATING LIQUIDS (IEC 60475:2011 (EQV)) |
| CEI EN 60814 : 1998 | INSULATING LIQUIDS - OIL - IMPREGNATED PAPER AND PRESSBOARD DETERMINATION OF WATER BY AUTOMATIC COULOMETRIC KARL FISCHER TITRATION |
| UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
| BS EN 62535:2009 | Insulating liquids. Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
| BS EN 62021-2:2007 | Insulating liquids. Determination of acidity Colourimetric titration |
| DIN EN 61203 : 1995 | SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES - GUIDE FOR MAINTENANCE OF TRANSFORMER ESTERS IN EQUIPMENT |
| VDE 0414-1 : 2001 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| BS EN 61181 : 2007 | MINERAL OIL-FILLED ELECTRICAL EQUIPMENT - APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TESTS ON ELECTRICAL EQUIPMENT |
| I.S. EN 60599:2016 | MINERAL OIL-FILLED ELECTRICAL EQUIPMENT IN SERVICE - GUIDANCE ON THE INTERPRETATION OF DISSOLVED AND FREE GASES ANALYSIS |
| I.S. EN 60814:1998 | INSULATING LIQUIDS - OIL-IMPREGNATED PAPER AND PRESSBOARD - DETERMINATION OF WATER BY AUTOMATIC COULOMETRIC KARL FISCHER TITRATION |
| CEI EN 62021-2 : 2007 | INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION |
| CLC/TR 50503 : 2010 | Guidelines for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs |
| CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60599:2016 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
| EN 61203:1994 | Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment |
| EN 60599:2016 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
| EN 61181:2007/A1:2012 | MINERAL OIL-FILLED ELECTRICAL EQUIPMENT - APPLICATION OF DISSOLVED GAS ANALYSIS (DGA) TO FACTORY TESTS ON ELECTRICAL EQUIPMENT (IEC 61181:2007/A1:2012) |
| EN 60044-1:1999/A2:2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| EN 62146-1:2014/A1:2016 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013/A1:2016) |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 60475 : 2011 | Method of sampling insulating liquids |
| EN 60814:1997 | Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
| EN 61198:1994 | Mineral insulating oils - Methods for the determination of 2-furfural and related compounds |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| IEC 60599:2015 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
| IEC 60475:2011 | Method of sampling insulating liquids |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| EN 60599:2016 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
| EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| EN 60475 : 2011 | Method of sampling insulating liquids |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.