Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks

Published date

05-16-2008

Publisher

European Committee for Standards - Electrical

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
  3.1 Terms and definitions
  3.2 Symbols
  3.3 Abbreviations
4 Methods of measurement
  4.1 Attenuation
      4.1.1 Test equipment
      4.1.2 Measurement procedure
      4.1.3 Presentation of the results
  4.2 Isolation
      4.2.1 Definition
      4.2.2 Test equipment
      4.2.3 Measurement procedure
      4.2.4 Presentation of the results
  4.3 Through-loss
      4.3.1 Definition
      4.3.2 Test equipment
      4.3.3 Measurement procedure
      4.3.4 Presentation of the results
  4.4 Group delay variation
      4.4.1 Definition
      4.4.2 Test equipment
      4.4.3 Method of measurement
      4.4.4 Presentation of the result
  4.5 Amplitude frequency response
  4.6 Return loss
  4.7 Hum modulation of carrier
      4.7.1 Definition
      4.7.2 Description of the method of measurement
      4.7.3 Measuring procedure
      4.7.4 Calculating the hum-modulation ratio
      4.7.5 Presentation of the results
  4.8 Two-carrier intermodulation measurements for second- and
      third-order products
5 Performance requirements and recommendations
  5.1 General performance requirements and recommendations
      5.1.1 Safety
      5.1.2 Electromagnetic compatibility (EMC)
      5.1.3 Environmental
      5.1.4 Marking
      5.1.5 Impedance
      5.1.6 Degradation of performance caused by overvoltages
  5.2 Performance requirements and recommendations for receiver lead
  5.3 Performance requirements and recommendations for system outlets
      5.3.1 Safety
      5.3.2 Quality grading
      5.3.3 Mechanical requirements
      5.3.4 Electrical parameters and requirements
  5.4 Performance requirements and recommendations for splitters and
      taps
      5.4.1 Description
      5.4.2 Mechanical requirements for connectors
      5.4.3 Electrical parameters and requirements
  5.5 Performance requirements and recommendations for all other
      passive equipment
      5.5.1 Description
      5.5.2 Mechanical requirements for connectors
      5.5.3 Electrical parameters and requirements
Bibliography
Annex A (informative) - Measurement errors which occur due to
        mismatched equipment
Annex B (informative) - Differences in some countries
Annex ZA (normative) - Normative references to international
         publications with their corresponding European publications
Annex ZB (normative) - Special national conditions
Annex ZC (informative) - A-deviations

Applies to system outlets, splitters and taps, passive single or multiple port equipment comprising filters, attenuators, equalizers, galvanic isolators, power injectors, cable splices, terminating resistors and transfer points, but excluding coaxial cables and receiver leads (see 5.2). This edition includes the following significant technical changes with respect to the previous edition. Subclause 3.1 includes several new or modified definitions. Clause 4 includes added test methods for attenuation, isolation, through-loss, group delay variation, amplitude frequency response and two carrier intermodulation measurements for second- and third-order products. Clause 5 includes updated and new performance requirements.

Committee	CLC/TC 209
DevelopmentNote	Supersedes EN 50083-4. (07/2008) Supersedes UNE EN 50083-4. (05/2011)
DocumentType	Standard
PublisherName	European Committee for Standards - Electrical
Status	Current
Supersedes	EN 50083-4 : 98 COR 1999 UNE-EN 50083-4:2000

Standards	Relationship
DIN EN 60728-4 : 2008	Identical
NF EN 60728-4 : 2014	Identical
NBN EN 60728-4 : 2008	Identical
VDE 0855-4 : 2008	Identical
I.S. EN 60728-4:2008	Identical
IEC 60728-4:2007	Identical
PN EN 60728-4 : 2008	Identical
CEI EN 60728-4 : 2008	Identical
UNE-EN 60728-4:2008	Identical
BS EN 60728-4:2008	Identical
NEN EN IEC 60728-4 : 2008	Identical

BS EN 60966-2-5:2017	Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
CEI EN 50607 : 2015	SATELLITE SIGNAL DISTRIBUTION OVER A SINGLE COAXIAL CABLE - SECOND GENERATION
CEI EN 60728-3 : 2011	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
I.S. EN 50607:2015	SATELLITE SIGNAL DISTRIBUTION OVER A SINGLE COAXIAL CABLE - SECOND GENERATION
CEI EN 60966-2-6 : 2010	RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-24 CONNECTORS
CEI CLC/TR 50083-10-1 : 2009	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS
UNE-EN 60728-3:2012	Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
S.R. CLC/TR 50083-10-1:2014	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS
UNE-EN 50083-2:2013	Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 60966-2-5:2017	Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
EN 60966-2-4:2016	Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
EN 50083-2:2012/A1:2015	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
I.S. EN 60966-2-6:2017	RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-6: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-24 CONNECTORS
BS EN 60966-2-6:2017	Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
I.S. EN 60728-3:2011	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
CEI EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
S.R. CLC/TS 50607:2013	SATELLITE SIGNAL DISTRIBUTION OVER A SINGLE COAXIAL CABLE - SECOND GENERATION
PD CLC/TR 50083-10-1:2014	Cable networks for television signals, sound signals and interactive services Guidelines for the implementation of return paths in cable networks
BS EN 60728-3:2011	Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks
BS EN 60966-2-4:2009	Radio frequency and coaxial cable assemblies Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
BS EN 50083-2 : 2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
CLC/TR 50083-10-1:2014	Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks
CEI EN 60966-2-4 : 2010	RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-2 CONNECTORS
I.S. EN 50083-2:2012	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT
I.S. EN 60966-2-5:2017	RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS
I.S. EN 60966-2-4:2016	RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-4: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 3000 MHZ, IEC 61169-2 CONNECTORS
PD CLC/TS 50607:2013	Satellite signal distribution over a single coaxial cable. Second generation
CLC/TS 50607:2013	Satellite signal distribution over a single coaxial cable - Second generation
BS EN 50607:2015	Satellite signal distribution over a single coaxial cable. Second generation
CEI EN 60966-2-5 : 2010	RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-5: DETAIL SPECIFICATION FOR CABLE ASSEMBLIES FOR RADIO AND TV RECEIVERS - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-2 CONNECTORS
I.S. EN IEC 60728-3:2018	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5)
TR 102 994 : 1.1.1	ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); IN HOME CABLING FOR INTEGRATED BROADBAND CABLE AND TELEVISION SERVICES
EN IEC 60728-3:2018	Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
EN 60966-2-6:2017	Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
EN 50607:2015	Satellite signal distribution over a single coaxial cable - Second generation

EN 61000-6-1:2007	Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
EN 60966-2-4:2016	Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
IEC 60966-2-6:2016	Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
EN 60966-2-6:2017	Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
IEC 61000-6-1 : 3.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC 60966-1:1999	Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
EN 61169-1:2013/AC:2016-02	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
IEC 61169-24:2009	Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)
EN 60966-1:1999	Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
IEC 61169-1:2013	Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60966-2-5:2016	Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
IEC 60966-2-4:2016	Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
IEC 61000-6-1:2016	Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
EN 60966-2-5:2017	Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
EN 61169-2:2007	Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 60050-581:2008	International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
IEC 60050-723:1997	International Electrotechnical Vocabulary (IEV) - Part 723: Broadcasting: Sound, television, data
IEC 61169-2:2007	Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52
EN 61169-24:2009	Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F)

View more information

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

EN 60728-4:2008

Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory