EN 60730-1:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Automatic electrical controls - Part 1: General requirements
Amended by
Superseded date
11-26-2019
Published date
07-29-2016
FOREWORD
1 Scope and normative references
2 Terms and definitions
3 General requirements
4 General notes on tests
5 Rating
6 Classification
7 Information
8 Protection against electric shock
9 Provision for protective earthing
10 Terminals and terminations
11 Constructional requirements
12 Moisture and dust resistance
13 Electric strength and insulation resistance
14 Heating
15 Manufacturing deviation and drift
16 Environmental stress
17 Endurance
18 Mechanical strength
19 Threaded parts and connections
20 Creepage distances, clearances and distances through
solid insulation
21 Resistance to heat, fire and tracking
22 Resistance to corrosion
23 Electromagnetic compatibility (EMC) requirements -
Emission
24 Components
25 Normal operation
26 Electromagnetic compatibility (EMC) requirements -
Immunity
27 Abnormal operation
28 Guidance on the use of electronic disconnection
Annex A (normative) - Indelibility of markings
Annex B (normative) - Measurement of creepage distances
and clearances in air
Annex C (normative) - void
Annex D (informative) - void
Annex E (normative) - Circuit for measuring leakage current
Annex F (informative) - Fire hazard testing
Annex G (normative) - Heat and fire resistance tests
Annex H (normative) - Requirements for electronic controls
Annex J (normative) - Requirements for thermistor elements
and controls using thermistors
Annex K (informative) - Nominal voltages of supply systems
for different modes of overvoltage control
Annex L (normative) - Overvoltage categories
Annex M (informative) - Typical usage
Annex N (normative) - Pollution degrees
Annex P (normative) - Printed circuit board coating
performance test
Annex Q (normative) - Printed circuit board coating
performance test
Annex R (informative) - Explanatory notes for surge
immunity test
Annex S (informative) - Guidance for applying Clause 20
Annex T (normative) - Requirements for SELV and PELV
Annex U (normative) - Requirements for relays when used
as controls in IEC appliances
Annex V (normative) - Requirements for controls powered
by secondary batteries (rechargeable)
Annex ZA (normative) - Normative references to international
Publications with their corresponding
European publications
Annex ZB (normative) - Special national conditions
Annex ZC (informative) - A-deviations
Annex ZD (normative) - EMC immunity for controls
Bibliography
IEC 60730-1:2013 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to controls for building automation within the scope of ISO 16484. This standard also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non electrical outputs. This standard is also applicable to relays when used as controls for IEC 60335 appliances. Additional requirements for the safety and operating values of relays when used as controls for IEC 60335 appliances are contained in Annex U. This standard does not apply to automatic electrical controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. This fifth edition cancels and replaces the fourth edition published in 2010. It constitutes a technical revision. The major changes with respect to the previous edition are as follows: - modification of the title and scope; - revisions to Clause H.26 based on changes in technology, applications, and to improve consistency and layout; - modification to Table H.12 to align with CISPR 22; - revisions to Annex J to correlate the fault modes of thermistors and to exempt thermistors used in conjunction with type 1 controls in SELV low power circuits from the tests specified in Annex J; - new requirements covering battery-powered controls, and the use of batteries in controls; - revision addressing the exclusion of relay faults; - new/updated requirements in Clause 24, for switch mode power supplies; - revisions covering the allowance of screwless-type clamping units complying with IEC 60999-1; - new requirements addressing remotely actuated control functions; - addition of a new/updated leakage current diagram to align the Annex E diagram with the diagram in IEC 60990 and updated requirements for temperature sensing controls. Key words: controls, electrical controls, automatic
| Committee |
CLC/TC 72
|
| DevelopmentNote |
2011 Edition remains active until all the Part 2's which are used in conjunction with it have been withdrawn. (08/2016)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM OVE EN 60730-1 : 2017 | Identical |
| NBN EN 298 : 2012 | Identical |
| NBN EN 60730-1 : 2012 | Identical |
| NEN EN IEC 60730-1 : 2016 | Identical |
| NEN EN 60730-1 : 95 AMD 15 98 | Identical |
| I.S. EN 60730-1:2016 | Identical |
| PN EN 60730-1 : 2016 | Identical |
| SN EN 60730-1 : 2016 | Identical |
| DIN EN 60730-1:2017-05 | Identical |
| VDE 0631-1 : 2017 | Identical |
| CEI EN 60730-1:2019 | Identical |
| CEI EN 60730-1 : 2002/A14 : 2005 | Identical |
| BS EN 60730-1:2011 | Identical |
| CEI EN 60730-1 : 2016 | Identical |
| UNE-EN 60730-1:2013 | Identical |
| UNE-EN 60730-1:2019 | Identical |
| BS EN 60730-1 95 : 95 AMD 12021 | Corresponds |
| BS EN 60730-1:2016 | Identical |
| 05/30135987 DC : 0 | EN 161 - AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 61427-2:2015 | Secondary cells and batteries for renewable energy storage. General requirements and methods of test On-grid applications |
| 13/30286091 DC : 0 | BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| I.S. EN 12098-4:2005 | CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS |
| 15/30331522 DC : 0 | BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 13/30279702 DC : 0 | BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| BS EN 60730-2-10:2007 | Automatic electrical controls for household and similar use Particular requirements for motor-starting relays |
| I.S. EN 12078:1999 | ZERO GOVERNORS FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| BS EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| 15/30331510 DC : 0 | BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 16/30338096 DC : 0 | BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| 07/30163662 DC : 0 | BS EN 778 - DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| BS EN 62282-3-1:2007 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| EN IEC 61204-7:2018 | Low-voltage switch mode power supplies - Part 7: Safety requirements |
| I.S. ENV 14459:2003 | METHOD OF RISK ANALYSIS AND RECOMMENDATIONS FOR THE USE OF ELECTRONICS IN SYSTEMS FOR THE CONTROL OF GAS BURNERS AND GAS BURNING APPLIANCES |
| 09/30192323 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| BS EN 60335-2-71:2003 | Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals |
| BS EN 60730-2-14 : 1998 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS |
| BS EN 60730-2-12:2006 | Automatic electrical controls for household and similar use Particular requirements for electrically operated door locks |
| BS EN 60730-2-19 : 2002 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-19: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED OIL VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| BS EN 60730-2-8:2002 | Specification for automatic electrical controls for household and similar use. Particular requirements Particular requirements for electrically operated water valves, including mechanical requirements |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. EN 16830:2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - TEMPERATURE CONTROL FUNCTION |
| I.S. EN 60335-2-50:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPARATUS - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| UNI EN 15270 : 2008 | PELLET BURNERS FOR SMALL HEATING BOILERS - DEFINITIONS, REQUIREMENTS, TESTING, MARKING |
| BS EN 12098-1:2017 | Energy Performance of Buildings. Controls for heating systems Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8 |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| PREN 624 : DRAFT 2009 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| I.S. EN 60335-2-74:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| I.S. EN 62109-1:2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| PREN 303-1 : DRAFT 2016 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 50491-3:2009 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS |
| I.S. EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV)) |
| I.S. EN 60335-2-28:2003&A1:2008&A11:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| 17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 62282-6-100:2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV)) |
| I.S. EN 15502-1:2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| UNE-EN 16678:2016 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 17/30332894 DC : 0 | BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| EN 12261:2018 | Gas meters - Turbine gas meters |
| EN 676:2003+A2:2008/AC:2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| DIN EN 416-1:2009-09 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| DIN EN 777-1:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| DIN EN 12953-9:2007-09 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| DIN EN 777-3:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| DIN EN 777-2:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| UNE-EN 298:2013 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 15091:2013 | Sanitary tapware. Electronic opening and closing sanitary tapware |
| UNE-EN 525:2010 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 624:2011 | Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats |
| BS EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
| BS EN 60950:2000 | Safety of information technology equipment |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| DIN EN 15091:2014-03 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
| BS EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters Safety |
| BS EN 12244-1:1998 | Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW Safety |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
| DIN EN 230:2005-10 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| EN 12098-4 : 2005 | CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS |
| EN 60335-2-99:2003 | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 60730-2-13:2008 | Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls |
| EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| EN 62282-3-1 : 2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| EN 60335-2-39:2003/A2:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| EN 12078:1998 | Zero governors for gas burners and gas burning appliances |
| EN 12263:1998 | Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
| EN 60691:2016 | Thermal-links - Requirements and application guide |
| EN 12405 : 2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| EN 60335-2-84:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| EN 12952-11:2007 | Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
| EN 50615:2015 | Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops) |
| EN 60335-2-38:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| EN 60335-2-12 : 2003 AMD 1 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| EN 12244-1:1998 | DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW - PART 1: SAFETY |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| EN 12098-2 : 2001 | CONTROLS FOR HEATING SYSTEMS - PART 2: OPTIMUM START-STOP CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| 12/30258456 DC : 0 | BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62282-3-1:2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 12405:2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| 15/30312987 DC : 0 | BS EN 16830 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - TEMPERATURE CONTROL FUNCTION |
| BS EN 62310-1:2005 | Static transfer systems (STS) General and safety requirements |
| BS EN 60730-2-11:2008 | Automatic electrical controls for household and similar use Particular requirements for energy regulators |
| PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 12/30257298 DC : 0 | BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| 03/102517 DC : 0 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| UNI EN 16304 : 2013 | AUTOMATIC VENT VALVES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| DIN EN 16830:2015-04 (Draft) | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - TEMPERATURE CONTROL FUNCTION |
| BS EN 16304:2013 | Automatic vent valves for gas burners and gas burning appliances |
| BS EN 60335-2-91:2003 | Specification for safety of household and similar electrical appliances Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 12952-11 : DRAFT 99 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESSORIES |
| 07/30163658 DC : 0 | BS EN 621 - NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| BS EN 60335-2-12 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| BS EN 16830:2017 | Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Temperature Control function |
| I.S. EN 62477-1:2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL |
| I.S. EN 60335-1:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 50615:2015 | Household and similar electrical appliances. Safety. Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops) |
| BS EN 60730-2-15:2010 | Automatic electrical controls for household and similar use Particular requirements for automatic electrical air flow, water flow and water level sensing controls |
| EN IEC 61058-1:2018 | Switches for appliances - Part 1: General requirements |
| PREN 303-5 : DRAFT 2010 | CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 60335-2-47:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV)) |
| BS EN 60335-2-88:2002 | Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| I.S. EN 12098-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| I.S. EN 60335-2-81:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV)) |
| I.S. EN 62310-1:2005 | STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| PREN 30-1-1 : DRAFT 2017 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| EN 60335-2-74:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| I.S. EN 60335-2-48:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV)) |
| I.S. EN 60335-2-39:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| I.S. EN 60335-2-26:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS |
| EN 60335-2-9:2003/A13:2010/AC:2012 | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
| I.S. EN 12261:2002 | GAS METERS - TURBINE GAS METERS |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 1359:2007-06 | GAS METERS - DIAPHRAGM GAS METERS |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 1020:2010-05 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| DIN EN 1643:2014-09 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| DIN EN 14459:2016-02 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 14597:2015-02 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| DIN EN 15270:2008-03 | Pellet burners for small heating boilers - Definitions, requirements, testing, marking |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| I.S. EN 624:2011 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| I.S. EN 1643:2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN 12244-1:1998 | DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW - PART 1: SAFETY |
| DIN EN 1643:2001-02 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN 161:2011 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| I.S. EN 12669:2000 | DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 746-2:2010 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 14597:2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| I.S. EN 1155:1998 | BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12098-4:2005-12 | CONTROLS FOR HEATING SYSTEMS - PART 4: OPTIMUM START-STOP CONTROL EQUIPMENT FOR ELECTRICAL SYSTEMS |
| I.S. EN 14459:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT |
| I.S. EN 1359:2017 | GAS METERS - DIAPHRAGM GAS METERS |
| DIN EN 12405:2003-10 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 15091:2013 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 298:2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| I.S. EN 88-1:2011 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 50 KPA |
| I.S. EN 303-1:2017 | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| DIN EN 16830:2017-06 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function |
| I.S. EN 12067-2:2004 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: ELECTRONIC TYPES |
| UNE-EN 16304:2013 | Automatic vent valves for gas burners and gas burning appliances |
| DIN EN 16678 E : 2016 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| 02/714359 DC : DRAFT DEC 2002 | EN 14597 - TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS (CENTRAL HEATING SYSTEMS) |
| I.S. EN 60335-2-9:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD)) |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| 09/30192320 DC : DRAFT MAY 2009 | BS EN 13633 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED PANIC EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 14/30304116 DC : 0 | BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS |
| PREN 12098-3 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| PREN 50615 : DRAFT 2013 | TESTS ON DEVICES FOR FIRE PREVENTION AND SUPPRESSION FOR HOBS (COOKTOPS) |
| 11/30246864 DC : 0 | BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS |
| 07/19990369 DC : 0 | BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
| UNE-EN 16830:2017 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function |
| 06/30149018 DC : 0 | EN 15502-1 - GAS-FIRED CENTRAL HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| BS EN 60335-2-99:2003 | Specification for safety of household and similar electrical appliances Particular requirements for commercial electric hoods |
| BS EN 60730-2-3:2007 | Automatic electrical controls for household and similar use Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| 04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 14459:2016 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
| 10/30228886 DC : 0 | BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| 15/30331525 DC : 0 | BS EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| UNE-EN 50615:2015 | Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops) |
| PREN 12098-1 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 60335-2-10 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| I.S. EN 60335-2-16:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD)) |
| BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| I.S. EN 12098-3:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| UNE-EN 15091:2014 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| BS EN 60335-2-50 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| I.S. EN IEC 61204-7:2018 | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| BS EN 60730-2-13:2008 | Automatic electrical controls for household and similar use Particular requirements for humidity sensing controls |
| I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
| PREN 1359 : DRAFT 2014 | GAS METERS - DIAPHRAGM GAS METERS |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| EN 60335-2-48 : 2003 AMD 11 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002) |
| I.S. EN 60335-2-59:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| I.S. EN 60335-2-91:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
| EN 60335-2-16:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011) |
| I.S. EN 60335-2-38:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| I.S. EN 60335-2-80:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| DIN EN 746-2:2011-02 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 12067-2:2015-12 (Draft) | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: ELECTRONIC TYPES |
| DIN EN 161:2013-04 | Automatic shut-off valves for gas burners and gas appliances (includes Amendment A3:2013) |
| DIN EN 12952-11 E : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 676:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| DIN EN 14459 E : 2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT |
| BS EN 12098-4:2005 | Controls for heating systems Optimum start-stop control equipment for electrical systems |
| BS EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| BS EN 161 : 2011 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| UNE-EN 62109-1:2011 | Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements |
| BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| DIN EN 15270 E : 2008 | PELLET BURNERS FOR SMALL HEATING BOILERS - DEFINITIONS, REQUIREMENTS, TESTING, MARKING |
| DIN EN 12952-11:2007-09 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNE-EN 50559:2013 | Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| I.S. EN 777-4:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| I.S. EN 525:2009 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 777-2:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| EN 60335-2-28:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| I.S. EN 416-1:2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| I.S. EN 777-3:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| ONORM EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 419-1:2009 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
| I.S. EN 621:2009 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| I.S. EN 778:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN 12067-2:2004-06 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| I.S. EN 1020:2009 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| I.S. EN 777-1:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| UNI EN 416-1 : 2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| UNI EN 12952-11 : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 12098-1 : 2013 | CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| UNI EN 1643 : 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| UNI EN 778 : 2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNI EN 777-4 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 624 : 2011 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| UNI EN 1020 : 2009 | NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| UNI EN 14597 : 2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| UNI EN 15091 : 2014 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| UNI EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| UNI EN 12953-9 : 2007 | SHELL BOILERS - PART 9: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN 621 : 2010 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 525 : 2009 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| UNI EN 298 : 2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| UNI EN 1155 : 2003 | BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS |
| UNI EN 777-1 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| UNI EN 161 : 2013 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| UNI EN 12098-3 : 2013 | CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS |
| UNI EN 676 : 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| UNI EN 777-2 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| UNI EN 419-1 : 2009 | NON DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| UNI EN 777-3 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN EN 16304:2013-05 | Automatic vent valves for gas burners and gas burning appliances |
| DIN EN 16830 E : 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - TEMPERATURE CONTROL FUNCTION |
| BS EN 12261:2002 | Gas meters. Turbine gas meters |
| PREN 12098-5 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 03/102518 DC : 0 | BS EN 13637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED EMERGENCY EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 13/30284000 DC : 0 | BS EN 50615 - TESTS ON DEVICES FOR FIRE PREVENTION AND SUPPRESSION FOR HOBS (COOKTOPS) |
| BS EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| UNE-EN 62282-3-1:2011 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| I.S. EN 50559:2013 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| 17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| BS EN 50559 : 2015 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| 12/30260007 DC : 0 | BS EN 15091 - SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
| 96/102362 DC : DRAFT MAR 1996 | PREN 806-2 - SPECIFICATION FOR INSTALLATION INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| CEI EN 50559 : 2014 | ELECTRIC ROOM HEATING, UNDERFLOOR HEATING, CHARACTERISTICS OF PERFORMANCE - DEFINITIONS, METHOD OF TESTING, SIZING AND FORMULA SYMBOLS |
| EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| PREN 676 : DRAFT 2012 | FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| 07/30163045 DC : DRAFT AUG 2007 | BS EN 525 - NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| 09/30204183 DC : 0 | BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR |
| 03/316889 DC : DRAFT OCT 2003 | EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS |
| DIN EN 15502-1:2015-10 | Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015) |
| 99/715322 DC : DRAFT NOV 99 | PREN 12952-11 - WATER-TUBE BOILERS - PART 11: REQUIREMENTS FOR LIMITING DEVICES AND SAFETY CIRCUITS OF THE BOILER AND ACCESORIES |
| EN 60335-2-73 : 2003 AMD 2 2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
| BS EN 15502-1 : 2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| PREN 15091 : DRAFT 2012 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| I.S. EN 60335-2-23:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| I.S. EN 60335-2-10:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| I.S. EN 60730-2-12:2006 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-12: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| PREN 331 : DRAFT 2013 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| DIN EN 12098-1:2016-01 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| I.S. EN 60730-2-13:2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-13: PARTICULAR REQUIREMENTS FOR HUMIDITY SENSING CONTROLS |
| DIN EN 12261:2007-07 | GAS METERS - TURBINE GAS METERS |
| I.S. EN 60335-2-86:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-86: PARTICULAR REQUIREMENTS FOR ELECTRIC FISHING MACHINES |
| BS EN 60691:2016 | Thermal-links. Requirements and application guide |
| DIN EN 14236 E : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| 13/30271701 DC : 0 | BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| 17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| I.S. EN 60335-2-12:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 60335-2-84:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| I.S. EN 60335-2-41:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
| I.S. EN 60335-2-45:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV)) |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60335-2-71:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 61558-1:2006 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| I.S. EN 60335-2-82:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| EN 60335-2-47:2003/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002) |
| I.S. EN 60335-2-51:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV)) |
| EN 60335-2-59:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| EN 60335-2-82:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 15091 E : 2014 | SANITARY TAPWARE - ELECTRONIC OPENING AND CLOSING SANITARY TAPWARE |
| DIN EN 525:2009-11 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| DIN EN 778:2010-03 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN 14597 E : 2015 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| DIN EN 88-1:2016-06 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa (includes Amendment A1:2016) |
| DIN EN 298:2012-11 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 12669:2000 | Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| 97/204928 DC : DRAFT APR 1997 | PREN 50273 - INSTALLATION OF ELECTRICAL APPARATUS IN AREAS ENDANGERED BY EXPLOSIVE SUBSTANCES |
| BS EN 15270:2007 | Pellet burners for small heating boilers. Definitions, requirements, testing, marking |
| BS EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety |
| BS EN 12263:1999 | Refrigerating systems and heat pumps. Safety switching devices for limiting the pressure. Requirements and tests |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 88-1 : 2011 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 50 KPA |
| BS EN 50491-3:2009 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) Electrical safety requirements |
| BS EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances Electronic types |
| BS EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems General requirements |
| BS EN 12952-11:2007 | Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories |
| BS EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety |
| BS EN 12953-9:2007 | Shell boilers Requirements for limiting devices of the boiler and accessories |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety |
| DIN EN 12098-1:2013-10 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| UNE-EN 50491-3:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
| UNE-EN 1020:2010 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| BS EN 230:2005 | Automatic burner control systems for oil burners |
| BS EN 12078:1998 | Zero governors for gas burners and gas burning appliances |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 50559:2013 | Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols |
| BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
| BS EN 676 : 2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| EN 60730-2-11:2008 | Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators |
| BS EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 12405:2002 | Gas meters. Gas-volume electronic conversion devices |
| UNE-EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| BS EN 12067-1:1999 | Gas/air ratio controls for gas burners and gas burning appliances Pneumatic types |
| BS EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| BS EN 12098-2:2001 | Controls for heating systems Optimum start-stop control equipment for hot water heating systems |
| UNE-EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| UNE-EN 778:2010 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| UNE-EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| DIN EN 676:2008-11 | Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008) |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| EN 16304:2013 | Automatic vent valves for gas burners and gas burning appliances |
| EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety |
| EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EN 15091:2013 | Sanitary tapware - Electronic opening and closing sanitary tapware |
| EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
| EN 1359:2017 | Gas meters - Diaphragm gas meters |
| EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety |
| EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety |
| EN 303-1:2017 | Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking |
| EN 15270:2007 | Pellet burners for small heating boilers - Definitions, requirements, testing, marking |
| EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety |
| EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety |
| EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| EN 230:2005 | Automatic burner control systems for oil burners |
| EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| DIN EN 303-1:2016-07 (Draft) | HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING |
| BS EN 50165:1997 | Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements |
| 13/30285587 DC : 0 | BS EN 14459 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT |
| BS EN 62282-6-100 : 2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| I.S. EN 230:2005 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| 11/30246174 DC : 0 | BS EN 16304 - VENT VALVES |
| 09/30201902 DC : 0 | BS EN 624 - SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| 11/30235383 DC : 0 | BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| BS EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| 10/30232464 DC : 0 | BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| 17/30356728 DC : 0 | BS EN 12261 - GAS METERS - TURBINE GAS METERS |
| I.S. EN 50156-2:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| NF EN 12405-1 : 2005 + A2 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS EN 12098-3:2013 | Controls for heating systems Control equipment for electrical heating systems |
| 07/30163039 DC : DRAFT AUG 2007 | BS EN 1020 - NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| PD CLC/TR 50455:2008 | List of interpretations on the EN 60730 series \'Automatic electrical controls for household and similar use\' |
| PREN 12261 : DRAFT 2017 | GAS METERS - TURBINE GAS METERS |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| 03/306642 DC : DRAFT APR 2003 | EN 230 - AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| UNI EN 806-2 : 2008 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| DIN EN 16678:2016-02 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 62321:2009 | ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS) |
| I.S. EN 16304:2013 | AUTOMATIC VENT VALVES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| I.S. EN 60335-2-99:2003/A1:2019 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| EN 12098-3:2017 | Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 |
| I.S. EN 60691:2016 | THERMAL-LINKS - REQUIREMENTS AND APPLICATION GUIDE |
| I.S. EN 16678:2015 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| I.S. EN 60335-2-99:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| I.S. EN 50615:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR DEVICES FOR FIRE PREVENTION AND SUPPRESSION FOR ELECTRIC HOBS (COOKTOPS) |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| CLC/TR 50455:2008 | List of interpretations on the EN 60730 series "Automatic electrical controls for household and similar use" |
| S.R. CLC/TR 50455:2008 | LIST OF INTERPRETATIONS ON THE EN 60730 SERIES "AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE" |
| IEC 60950:1999 | Safety of information technology equipment |
| DIN EN 624:2011-10 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| I.S. EN 60335-2-73:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
| I.S. EN 60730-2-14:1998 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS |
| I.S. EN 676:2003 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
| EN 62282-6-100:2010/A1:2012 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012) |
| EN 60730-2-12:2006/A11:2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-12: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED DOOR LOCKS |
| DIN EN 777-4:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| DIN EN 419-1:2009-07 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| BS EN 14459:2015 | Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment |
| BS EN 1359:2017 | Gas meters. Diaphragm gas meters |
| BS EN 1155:1997 | Building hardware. Electrically powered hold-open devices for swing doors. Requirements and test methods |
| BS EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety |
| UNE-EN 14597:2014 | Temperature control devices and temperature limiters for heat generating systems |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| BS EN 303-1:2017 | Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| EN 60335-2-81:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011) |
| EN 88-1:2011+A1:2016 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
| EN 12067-1 : 98 AMD 1 2003 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 60335-2-71 : 2003 AMD 1 2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| EN 16830:2017 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function |
| DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| EN 60730-2-15:2010 | Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls |
| EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 14459:2015 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
| EN 60335-2-50:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| EN 15502-1:2012+A1:2015 | Gas-fired heating boilers - Part 1: General requirements and tests |
| EN 60335-2-88:2002 | Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| EN 60335-2-91:2003 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems |
| EN 60730-2-3:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-3: PARTICULAR REQUIREMENTS FOR THERMAL PROTECTORS FOR BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| EN 12953-9:2007 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| EN 1155:1997/A1:2002/AC:2006 | BUILDING HARDWARE - ELECTRICALLY POWERED HOLD-OPEN DEVICES FOR SWING DOORS - REQUIREMENTS AND TEST METHODS |
| EN 50491-3:2009 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
| EN 62310-1:2005 | Static transfer systems (STS) - Part 1: General and safety requirements |
| EN 60335-2-10:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| EN 60335-2-51:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011) |
| EN 60335-2-23:2003/A2:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE (IEC 60335-2-23:2003/A2:2012, MODIFIED) |
| EN 60730-2-14:1997/A2:2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS |
| DIN EN 12067-1:1998-12 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| EN 60335-2-45:2002/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002/A2:2011) |
| EN 61427-2:2015 | Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| DIN EN 61558-2-17 : 1998 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2-17: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES |
| DIN EN 12067-1 : 1998 AMD 1 2003 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 60730-2-19:2002/A2:2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-19: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED OIL VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| EN 62109-1 : 2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 88-1:2012 | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
| UNE-EN 15502-1:2013 | Gas-fired heating boilers - Part 1: General requirements and tests |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 61000-4-8 : 2.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| CISPR 14-1:2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| EN 50525-2-21:2011/AC:2013 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-21: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH CROSSLINKED ELASTOMERIC INSULATION |
| ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60245-1:2003+AMD1:2007 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| IEC 60738-1:2006+AMD1:2009 CSV | Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
| IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
| EN 60998-2-2:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| EN 61558-2-16:2009/A1:2013 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013) |
| EN 61000-4-28:2000/A2:2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-28: TESTING AND MEASUREMENT TECHNIQUES - VARIATION OF POWER FREQUENCY, IMMUNITY TEST FOR EQUIPMENT WITH INPUT CURRENT NOT EXCEEDING 16 A PER PHASE |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| IEC 60998-2-3:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
| EN 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| EN 61000-3-3:2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013) |
| EN 60127-1:2006/A2:2015 | MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS |
| EN 60738-1:2006/A1:2009 | THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION |
| IEC 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
| IEC 62151:2000 | Safety of equipment electrically connected to a telecommunication network |
| IEC 61558-2-16:2009+AMD1:2013 CSV | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units |
| IEC 61000-6-1 : 3.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| EN 60384-17:2005 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| IEC 61810-1:2015 | Electromechanical elementary relays - Part 1: General and safety requirements |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
| IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV | Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links |
| EN 60099-1:1994/A1:1999 | SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| IEC 60227-1:2007 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
| EN 60112 : 2003 AMD 1 2009 | METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
| IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
| IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| IEC 61000-4-28:1999+AMD1:2001+AMD2:2009 CSV | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
| IEC 60384-17:2005 | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60738-1-1:2008 | Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ |
| IEC 60099-1:1991+AMD1:1999 CSV | Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| EN 61000-3-2:2014 | Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| ISO 62:2008 | Plastics Determination of water absorption |
| EN 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
| IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 60999-1:2000 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| EN 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 60664-4:2006/corrigendum:2006 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| ISO 178:2010 | Plastics Determination of flexural properties |
| IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60664-3:2017 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| EN 61000-4-13:2002/A2:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015) |
| IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV | Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests |
| EN 50525-2-11:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation |
| EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| IEC 60384-16:2005 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| EN 60038 : 2011 | CENELEC STANDARD VOLTAGES (IEC 60038:2009, MODIFIED) |
| EN 55014-1:2017 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| EN 50159:2010 | Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems |
| EN 60738-1-1:2008 | Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| EN ISO 16484-2:2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
| EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| EN 60269-1:2007/A2:2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
| IEC 61000-3-2 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) |
| EN 60384-16:2005 | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors |
| EN 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.