• There are no items in your cart

EN 61189-2:2006

Current
Current

The latest, up-to-date edition.

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
Published date

09-29-2006

INTRODUCTION
1 Scope
2 Normative references
3 Accuracy, precision and resolution
   3.1 Accuracy
   3.2 Precision
   3.3 Resolution
   3.4 Report
   3.5 Student's "t" distribution
   3.6 Suggested uncertainty limits
4 Catalogue of approved test methods
5 P: Preparation/conditioning test methods
   5.1 Test 2P01: Dry heat (under consideration)
   5.2 Test 2P02: Solder float stress (under consideration)
6 V: Visual test methods
7 D: Dimensional test methods
   7.1 Test 2D01: Thickness of base materials and rigid boards
8 C: Chemical test methods
   8.1 Test 2C01: Resistance to sodium hydroxide of base
         materials
   8.2 Test 2C02: Gel time of epoxy based prepreg materials
   8.3 Test 2C03: Resin content of prepreg materials by
         treated weight
   8.4 Test 2C04: Volatile content of prepreg materials
   8.5 Test 2C05: Blistering during heat shock
   8.6 Test 2C06: Flammability, vertical burning test for
         rigid materials
   8.7 Test 2C07: Flammability; horizontal burning test for
         rigid materials
   8.8 Test 2C08: Flammability, flex material
   8.9 Test 2C09: Melting viscosity of prepreg materials
   8.10 Test 2C10: Resin content of prepreg materials by sublimation
   8.11 Test 2C11: UV blocking characteristics of laminates
   8.12 Test 2C12: Total halogen content in base materials
9 M: Mechanical test methods
   9.1 Test 2M01: Test method for bow and twist
   9.2 Test 2M02: Bow/twist after etching and heating
   9.3 Test 2M03: Cure factor of base materials by differential
         scanning calorimetry (DSC) or thermomechanical analysis (TMA)
   9.4 Test 2M04: Twist after heating (under consideration)
   9.5 Test 2M05: Pull-off strength
   9.6 Test 2M06: Peel strength after exposure to solvent vapour
   9.7 Test 2M07: Peel strength after immersion in solvent
   9.8 Test 2M08: Flexural strength (under consideration)
   9.9 Test 2M09: Resin flow of prepreg material
   9.10 Test 2M10: Glass transition temperature of base materials
         by differential scanning calorimetry (DSC)
   9.11 Test 2M11: Glass transition temperature of base materials
         by thermomechanical analysis (TMA)
   9.12 Test 2M12: Surface waviness
   9.13 Test 2M13: Peel strength as received
   9.14 Test 2M14: Peel strength after heat shock
   9.15 Test 2M15: Peel strength after dry heat
   9.16 Test 2M16: Peel strength after simulated plating
   9.17 Test 2M17: Peel strength at high temperature
   9.18 Test 2M18: Surface quality (under consideration)
   9.19 Test 2M19: Punching (under consideration)
   9.20 Test 2M20: Flexural strength
   9.21 Test 2M21: Rolling fatigue of flexible base materials
   9.22 Test 2M22: Weight of foil after lamination
   9.23 Test method 2M23: Rectangularity of cut panels
   9.24 Test 2M24: Coefficient of thermal expansion (under
         consideration)
   9.25 Test 2M25: Time to delamination by thermomechanical
         analysis (TMA)
   9.26 Test 2M26: Scaled flow test for prepreg materials
   9.27 Test 2M27: The resin flow properties of coverlay films,
         bonding films and adhesive cast films used in the
         fabrication of flexible printed boards
10 Electrical test methods
   10.1 Test 2E01: Surface tracking, moisture condition (under
         consideration)
   10.2 Test 10.2 2E02: Dielectric breakdown of base materials
         parallel to laminations
   10.3 Test 2E03: Surface resistance after damp heat, steady state
   10.4 Test 2E04: Volume resistivity and surface resistivity
   10.5 Test 2E05: Permittivity and dielectric dissipation
         (under consideration)
   10.6 Test 2E06: Volume and surface resistivity, 3 electrodes
         (under consideration)
   10.7 Test 2E07: Surface and volume resistivity, elevated
         temperature (under consideration)
   10.8 Test 2E08: Surface corrosion
   10.9 Test 2E09: Comparative tracking index (CTI)
   10.10 Test 2E10: Permittivity and dissipation factor (under
         consideration)
   10.11 Test 2E11: Electric strength (under consideration)
   10.12 Test 2E12: Resistance of foil (under consideration)
   10.13 Test 2E13: Corrosion at edge (under consideration)
   10.14 Test 2E14: Arc resistance
   10.15 Test 2E15: Dielectric break-down (under consideration)
   10.16 Test 2E16: Contact resistance of printed circuit keypad
         cont (under consideration)
   10.17 Test 2E17: Insulation resistance of printed board materials
   10.18 Test 2E18: Fungus resistance of printed board materials
11 N: Environmental test methods
   11.1 Test 2N01: Pressure cooker test (under consideration)
   11.2 Test 2N02: Water absorption
12 X: Miscellaneous test methods
   12.1 Test 2X02: Dimensional stability of thin laminates
Annex A (informative) Worked examples
Annex B (informative) Conversion table
Annex C (informative) Laboratory pro forma (form)
Annex D (informative) Laboratory pro forma
Annex ZA (normative) Normative references to international
                      publications with their corresponding
                      European publications

Provides a catalogue of test methods representing methodologies and procedures that can be applied to test materials used for manufacturing interconnection structures (printed boards) and assemblies.

Committee
CLC/SR 91
DevelopmentNote
To be used in conjunction with other parts of EN 61189 and EN 60068. (06/2005)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

BS EN 61249-2-39:2013 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-26:2005 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-23:2005 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
BS EN 61249-2-10:2003 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-18:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad
I.S. EN 62496-2-2:2011 OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS
CEI EN 61249-2-39 : 2014 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXIDE AND NON-EPOXIDE, WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
CEI EN 61249-2-18 : 2002 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
BS EN 61249-2-43:2016 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-4:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad
CEI EN 61249-2-2 : 2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD
CEI EN 62496-2-2 : 2012 OPTICAL CIRCUIT BOARDS - PART 2-2: MEASUREMENTS - DIMENSIONS OF OPTICAL CIRCUIT BOARDS
CEI EN 61249-2-5 : 2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
BS EN 61249-2-2:2005 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad
BS EN 61249-2-8:2003 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
CEI EN 50557 : 2012 REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
BS EN 61190-1-1:2002 Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly
EN IEC 61249-2-47:2018 Materials for printed boards and other interconnecting structures – Part 2-47: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
CEI EN 61249-4-11 : 2006 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-11: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD NON-HALOGENATED EPOXIDE, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
I.S. EN 61249-2-22:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61347-1:2015 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
CEI EN 61249-2-40 : 2014 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, MODIFIED, NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-2:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD
CEI EN 61249-4-12 : 2006 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-12: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD NON-HALOGENATED MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
CEI EN 61249-2-11 : 2005 MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-11: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN POLYIMIDE ET TISSU DE VERRE DE TYPE E EPOXYDE BROME MODIFIE OU NON MODIFIE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE
I.S. EN 61249-2-44:2016 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-44: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-30:2013 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINATE OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD (IEC 61249-2-30:2012 (EQV))
BS EN 61347-1:2015 Lamp controlgear General and safety requirements
EN 61347-1:2015 Lamp controlgear - Part 1: General and safety requirements
EN 61249-4-5:2005 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability
EN 61249-2-37:2009 Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-43:2016 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-13:1999 Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper clad
EN 61249-4-19:2013 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
EN 61249-4-15 : 2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability
EN 61249-2-1:2005 Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
EN 62496-2-2:2011 Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards
EN 61249-2-27:2013 Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad
EN 62878-1-1:2015 Device embedded substrate - Part 1-1: Generic specification - Test methods
EN 61249-2-26:2005 Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
EN 61249-2-44:2016 Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-18:2002 Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad
EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
CEI EN 61249-2-37 : 2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
BS EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-2-1:2005 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
I.S. EN 61249-2-23:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-23: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER-CLAD
BS EN 61249-2-6:2003 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
CEI EN 61249-4-16 : 2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-16: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
BS EN 61249-2-42:2010 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability
BS EN 61249-4-5:2005 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability
I.S. EN 61249-2-43:2016 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-43: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
EN IEC 61249-2-46:2018 Materials for printed boards and other interconnecting structures – Part 2-46: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
I.S. EN 61249-2-1:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER CLAD
BS EN 61249-2-30:2013 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-21:2003 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-40:2013 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-37:2009 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
CEI EN 61249-2-23 : 2005 MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-23: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES DE PAPIER CELLULOSE PHENOLIQUE NON HALOGENE, DE QUALITE ECONOMIQUE, PLAQUEES CUIVRE
BS EN 61249-2-9:2003 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-2-5:2003 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad
CEI EN 61249-4-2 : 2006 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
I.S. EN 61249-2-8:2003 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD - MODIFIED BROMINATED EPOXIDE WOVEN FIBREGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
CEI EN 61249-2-30 : 2014 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
CEI EN 61249-2-9 : 2004 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-9: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE, MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
CEI EN 61249-2-22 : 2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
NF EN 61249 8-8 : 1998 MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON-CONDUCTIVE FILMS AND COATINGS - SECTION 8: TEMPORARY POLYMER COATINGS
I.S. EN 61249-2-36:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-36: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
CEI EN 61249-2-35 : 2010 MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-35: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE MODIFIE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB
CEI EN 61249-4-14 : 2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-39:2013 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXIDE AND NON-EPOXIDE, WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY (IEC 61249-2-39:2012 (EQV))
I.S. EN 61249-4-12:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-12: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - NON-HALOGENATED MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
CEI EN 61249-2-41 : 2011 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 60664-3:2017 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
I.S. EN IEC 61249-2-45:2018 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-45: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NONHALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (1.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-9:2003 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61249-2-35:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-35: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-38:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-4-1:2008 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
I.S. EN 61188-1-1:1999 PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE - PART 1-1: GENERIC REQUIREMENTS - FLATNESS CONSIDERATIONS FOR ELECTRONIC ASSEMBLIES
UNE-EN 50557:2012 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
EN IEC 61249-2-45:2018 Materials for printed boards and other interconnecting structures – Part 2-45: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
BS EN 61249-4-19:2013 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-2-38:2009 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-2-19:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad
I.S. EN 61249-4-15:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
BS EN 61249-4-17:2009 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-2-13:1999 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Cyanate ester non-woven aramid laminate of defined flammability, copper-clad
BS EN 61249-4-1:2008 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability
I.S. EN 61249-2-13:1999 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-13: SECTIONAL SPECIFICATION SET FOR REINFORCED BASE MATERIALS, CLAD AND UNCLAD - CYANATE ESTER NON-WOVEN ARAMID LAMINATE OF DEFINED FLAMMABILITY, COPPER-CLAD
I.S. EN 61249-2-41:2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-3-5:1999 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 3-5: SECTIONAL SPECIFICATION SET FOR UNREINFORCED BASE MATERIALS, CLAD AND UNCLAD (INTENDED FOR FLEXIBLE PRINTED BOARDS) - TRANSFER ADHESIVE FILMS
CEI EN 61249-2-44 : 1ED 2017 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-44: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-12:1999 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-12: SECTIONAL SPECIFICATION SET FOR REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE NON-WOVEN ARAMID LAMINATE OF DEFINED FLAMMABILITY, COPPER CLAD
CEI EN 61249-2-27 : 2014 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61249-8-8:1999 MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON-CONDUCTIVE FILMS AND COATINGS - TEMPORARY POLYMER
UNE-EN 61347-1:2016 Lamp controlgear - Part 1: General and safety requirements
UNE-EN 60664-3:2004 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
CEI EN 61249-4-19 : 2014 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HICH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
BS EN 61249-2-22:2005 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
CEI EN 61249-2-21 : 2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
BS EN 61249-4-18:2013 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
BS EN 61249-8-8:1997 Materials for interconnection structures. Sectional specification set for non-conductive films and coatings Temporary polymer coatings
NF EN 61188 1-1 : 1998 PRINTED BOARD AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE - PART 1-1: GENERIC REQUIREMENTS - FLATNESS CONSIDERATIONS FOR ELECTRONIC ASSEMBLIES
BS EN 61249-2-35:2009 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
CEI EN 61249-4-17 : 2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-17: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
BS EN 61249-2-7:2002 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
I.S. EN 61249-4-16:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-16: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
CEI EN 61249-2-1 : 2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS,ECONOMIC GRADE, COPPER CLAD
CEI EN 61249-4-15 : 2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
I.S. EN IEC 61249-2-46:2018 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-46: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (1.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
BS EN 62496-2-2:2011 Optical circuit boards Measurements. Dimensions of optical circuit boards
BS EN 62878-1-1:2015 Device embedded substrate Generic specification. Test methods
BS EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
CEI EN 61347-1 : 2016 LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
BS EN 61249-2-11:2003 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
BS EN 61249-4-2:2005 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Multifunctional expoxide woven E-glass prepeg of defined flammability
BS EN 61249-2-41:2010 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS EN 61249-2-27:2013 Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad
CEI EN 61249-2-26 : 2005 MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-26: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN TISSU DE VERRE DE TYPE EPOXYDE TISSE/NON TISSE, NON-HALOGENE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE
CEI EN 61249-2-42 : 2011 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN / WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-4-18:2013 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
EN 63024:2018 Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
I.S. EN IEC 61249-2-47:2018 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-47: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (2.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-19:2002 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-19: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE CROSS-PLIED LINEAR FIBREGLASS-REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) COPPER CLAD
I.S. EN 61249-4-19:2013 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-7:2002 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61249-4-17:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-17: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-3-3:1999 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 3-3: SECTIONAL SPECIFICATION SET FOR UNREINFORCED BASE MATERIALS, CLAD AND UNCLAD (INTENDED FOR FLEXIBLE PRINTED BOARDS) - ADHESIVE COATED FLEXIBLE POLYESTER FILM
BS EN 60893-3-2 : 2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON EPOXY RESINS
I.S. EN 61249-2-37:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
BS EN 61249-2-36:2009 Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
BS EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
I.S. EN 61249-2-27:2013 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD (IEC 61249-2-27:2012 (EQV))
CEI EN 61249-2-38 : 2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
CEI EN 61249-4-1 : 2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
CEI EN 61249-2-6 : 2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
BS EN 61249-4-14:2009 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
I.S. EN 61249-2-4:2002 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-4: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN/WOVEN FIBREGLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61249-4-11:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-11: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - NON-HALOGENATED EPOXIDE, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
I.S. EN 61249-2-42:2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-4-14:2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
BS EN 61249-2-12:1999 Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide non-woven aramid laminate of defined flammability, copper-clad
I.S. EN 61249-2-26:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-26: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
BS EN 61188-1-1:1997 Printed boards and assemblies. Design and use. Generic requirements Flatness considerations for electronic assemblies
BS EN 61249-4-11:2005 Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven E-glass prepeg of defined flammability
I.S. EN 61249-2-6:2005/AC:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61249-2-40:2013 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, NONHALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY (IEC 61249-2-40:2012 (EQV))
BS EN 60664-3:2017 Insulation coordination for equipment within low-voltage systems Use of coating, potting or moulding for protection against pollution
CEI EN 61249-2-36 : 2010 MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-36: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB
I.S. EN 61249-4-5:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
CEI EN 61249-4-18 : 2014 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY
CEI EN 61249-4-5 : 2006 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
I.S. EN 61249-3-4:1999 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 3-4: SECTIONAL SPECIFICATION SET FOR REINFORCED BASE MATERIALS, CLAD AND UNCLAD (INTENDED FOR FLEXIBLE PRINTED BOARDS) - ADHESIVE COATED FLEXIBLE POLYIMIDE FILM
I.S. EN 63024:2018 REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT-BREAKERS, RCBOS AND RCCBS FOR HOUSEHOLD AND SIMILAR USES
CEI EN 61249-2-8 : 2004 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD MODIFIED BROMINATED EPOXIDE WOVEN FIBERGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
CEI EN 61249-2-43 : 1ED 2017 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-43: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
I.S. EN 61249-2-18:2002 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61249-4-2:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY
I.S. EN 61249-2-21:2004 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
I.S. EN 61249-2-11:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
UNE-EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
EN 61249-2-7:2002/corrigendum:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
EN 61249-2-4:2002 Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad
EN 61249-2-21:2003 Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
EN 61249-8-8:1997 Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings
EN 61249-2-6:2003/corrigendum:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
EN 60893-3-2:2004/A1:2011 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON EPOXY RESINS
EN 61249-2-22:2005 Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
EN 61249-4-18 : 2013 Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
EN 61249-2-23:2005 Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad
EN 61188-1-1:1997 Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements - Flatness considerations for electronic assemblies
EN 61249-2-8:2003 Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
EN 61249-2-41:2010 Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-3-4:1999 Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film
EN 61249-2-38:2009 Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-3-5:1999 Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films
EN 61249-2-42 : 2010 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY
EN 61249-4-1:2008 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability
EN 61249-2-35:2009 Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-11:2003/corrigendum:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
EN 61249-2-30:2013 Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad
EN 61249-3-3:1999 Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film
EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
EN 61249-2-36:2009 Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-4-12:2005 Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
EN 61249-2-9:2003 Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
EN 61249-2-40:2013 Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-5:2003/corrigendum:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
EN 61249-2-10:2003/corrigendum:2005 Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
EN 61249-2-19:2002 Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad
EN 61249-4-17:2009 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
EN 61249-2-2:2005 Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad
EN 61249-2-12:1999 Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad
EN 61190-1-1:2002 Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly
EN 61249-4-11:2005 Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability
EN 61249-2-39 : 2013 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-4-14 : 2009 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
HD 429 : 200S1 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 61189-3:2007 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
ISO 3274:1996 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
ISO 9001:2015 Quality management systems — Requirements
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN ISO 3274 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.