EN 659:2003+A1:2008/AC:2009
Current
The latest, up-to-date edition.
PROTECTIVE GLOVES FOR FIREFIGHTERS
06-17-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Requirements
4 Preconditioning and testing conditions
5 Marking
6 Information supplied by the manufacturer
Annex A (informative) - Test results - Uncertainty of measurement
Annex ZA (informative) - Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
Describes minimum performance requirements and methods of test for firefighters' protective gloves under normal firefighting conditions.
Committee |
CEN/TC 162
|
DevelopmentNote |
2003 Edition Re-Issued in March 2008 & incorporates AMD 1 2008. (03/2008)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN 659 : 2003 COR 2009 | Identical |
NS EN 659 : 2003 AC 2009 | Identical |
SN EN 659 : 2008 CORR 2009 | Identical |
UNI EN 659 : 2008 | Identical |
NF EN 659 : 2004 + A1 2008 | Identical |
I.S. EN 659:2003 | Identical |
NEN EN 659 : 2003 + A1/C1 2009 | Identical |
PN EN 659 : 2006 + A1 2010 | Identical |
UNE-EN 659:2009+A1:2009 | Identical |
BS EN 659 : 2003 | Identical |
DIN EN 659:2008-06 | Identical |
99/541173 DC : DRAFT OCT 1999 | BS EN 13731 - SPECIFICATION FOR LIFTING BAGS FOR FIRE AND RESCUE SERVICE USE |
UNE-EN 15767-1:2010 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 1: General requirements for portable monitor assemblies |
BS EN 14458:2004 | Personal eye-equipment. Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
I.S. EN 15182-1:2007 | HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 1: COMMON REQUIREMENTS |
BS EN 14466 : 2005 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
BS EN 13731:2007 | Lifting bag systems for fire and rescue service use. Safety and peformance requirements |
BS EN 420 : 2003 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 15182-1 : 2007 | HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 1: COMMON REQUIREMENTS |
BS EN 407:2004 | Protective gloves against thermal risks (heat and/or fire) |
DIN EN 13731:2008-02 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
FD S61 508 : 2010 FD | FIREFIGHTING AND RESCUE SERVICE VEHICLES - APPLICATION GUIDE OF NF EN 1846-2:2009 |
06/30156009 DC : DRAFT SEP 2006 | BS EN 13921 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES |
BS EN 15767-1:2009 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors General requirements for portable monitor assemblies |
07/30158997 DC : 0 | BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
PREN 14458 : DRAFT 2016 | PERSONAL EYE-EQUIPMENT - HIGH PERFORMANCE VISORS INTENDED ONLY FOR USE WITH PROTECTIVE HELMETS |
17/30319108 DC : 0 | BS ISO 18639-4 - PPE ENSEMBLES FOR FIREFIGHTERS UNDERTAKING SPECIALIST RESCUE ACTIVITIES - PART 4: GLOVES |
15/30295265 DC : 0 | BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
05/30131042 DC : DRAFT MAR 2005 | EN 15182-2 - HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 2: COMBINATION BRANCHPIPES PN 16 |
DIN EN 16327:2014-07 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
S.R. CWA 16106:2010 | PPE FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR, (CBRN) HAZARDS |
UNE-EN 16327:2015 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
I.S. EN 15767-1:2009 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE MONITORS - PART 1: GENERAL REQUIREMENTS FOR PORTABLE MONITOR ASSEMBLIES |
DIN EN 14458:2016-09 (Draft) | PERSONAL EYE-EQUIPMENT - FACESHIELDS AND VISORS FOR USE WITH FIREFIGHTERS' AND HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS USED BY FIREFIGHTERS, AMBULANCE AND EMERGENCY SERVICES |
DIN EN 14466:2008-09 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
I.S. EN 1846-2:2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
I.S. EN 1846-3:2013 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE |
I.S. EN 420:2003 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
I.S. EN 14466:2005 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
DIN EN 14458 E : 2004 | FACESHIELDS AND VISORS FOR USE WITH FIREFIGHTERS' AND HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS USED BY FIREFIGHTERS, AMBULANCE AND EMERGENCY SERVICES |
05/30131039 DC : DRAFT MAR 2005 | EN 15182-1 - HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 1: COMMON REQUIREMENTS |
UNI EN 16327 : 2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
05/30135268 DC : DRAFT JUN 2005 | EN 15182-4 - HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 4: HIGH PRESSURE BRANCHPIPES PN 40 |
PREN 407 : DRAFT 2017 | PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) |
16/30337083 DC : 0 | BS EN 14458 - PERSONAL EYE-EQUIPMENT - HIGH PERFORMANCE VISORS INTENDED ONLY FOR USE WITH PROTECTIVE HELMETS |
DIN EN 14466 E : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN 1846-3:2013 | Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
UNI EN 1846-3 : 2013 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE |
UNI EN 1846-2 : 2013 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
UNI EN 14466 : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
UNI EN 420 : 2010 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
UNI EN 15767-1 : 2009 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE MONITORS - PART 1: GENERAL REQUIREMENTS FOR PORTABLE MONITOR ASSEMBLIES |
PREN 13204 : DRAFT 2015 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
BS EN 16327:2014 | Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
EN 14458:2004 | Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
UNI EN 15182-1 : 2010 | HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 1: COMMON REQUIREMENTS |
ISO 7076-5:2014 | Fire protection Foam fire extinguishing systems Part 5: Fixed compressed air foam equipment |
I.S. EN 14458:2004 | PERSONAL EYE-EQUIPMENT - FACESHIELDS AND VISORS FOR USE WITH FIREFIGHTERS' AND HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS USED BY FIREFIGHTERS, AMBULANCE AND EMERGENCY SERVICES |
DIN EN 420:2010-03 | PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 13921:2007 | Personal protective equipment. Ergonomic principles |
BS EN 1846-3:2013 | Firefighting and rescue service vehicles Permanently installed equipment. Safety and performance |
BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
I.S. EN 407:2004 | PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) |
EN 407:2004 | Protective gloves against thermal risks (heat and/or fire) |
UNE-EN 1846-2:2011 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
BS EN 1846-2 : 2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
EN 13921:2007 | Personal protective equipment - Ergonomic principles |
EN 15767-1:2009 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 1: General requirements for portable monitor assemblies |
EN 16327:2014 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
EN 15182-1:2007+A1:2009 | Hand-held branchpipes for fire service use - Part 1: Common requirements |
EN 13731:2007 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
EN 1846-2:2009+A1:2013 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
I.S. EN 16327:2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
17/30362443 DC : 0 | BS EN 407 - PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) |
DIN EN 15767-1:2009-09 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE MONITORS - PART 1: GENERAL REQUIREMENTS FOR PORTABLE MONITOR ASSEMBLIES |
13/30255976 DC : 0 | BS ISO 7076-5 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 5: COMPRESSED AIR FOAM EQUIPMENT |
ISO 15383:2001 | Protective gloves for firefighters — Laboratory test methods and performance requirements |
UNE-EN 15182-1:2007 | Hand-held branchpipes for fire service use - Part 1: Common requirements |
DIN EN 407:2004-11 | PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE) |
UNE-EN 1846-3:2015 | Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
DIN EN 1846-2:2013-05 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance (includes Amendment A1:2013) |
DIN EN 14458:2004-11 | FACESHIELDS AND VISORS FOR USE WITH FIREFIGHTERS' AND HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS USED BY FIREFIGHTERS, AMBULANCE AND EMERGENCY SERVICES |
DIN EN 15182-1:2010-04 | HAND-HELD BRANCHPIPES FOR FIRE SERVICE USE - PART 1: COMMON REQUIREMENTS |
DIN EN 1846-3:2013-11 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 3: PERMANENTLY INSTALLED EQUIPMENT - SAFETY AND PERFORMANCE |
DIN EN 13921:2007-08 | Personal protective equipment - Ergonomic principles |
EN 407:2004 | Protective gloves against thermal risks (heat and/or fire) |
ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
EN 20811 : 1992 | TEXTILES - DETERMINATION OF RESISTANCE TO WATER PENETRATION - HYDROSTATIC PRESSURE TEST |
EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
EN 388 : 1994 | PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
EN 702:1994 | Protective clothing - Protection against heat and flame - Test method: Determination of the contact heat transmission through protective clothing or its materials |
EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
EN 420:2003+A1:2009 | Protective gloves - General requirements and test methods |
EN ISO 6530:2005 | Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
ISO 15383:2001 | Protective gloves for firefighters — Laboratory test methods and performance requirements |
EN 367:1992/AC:1992 | PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF DETERMINING HEAT TRANSMISSION ON EXPOSURE TO FLAME |
EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
ISO 20344:2011 | Personal protective equipment Test methods for footwear |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.