|
DIN EN 16722 E : 2015
|
INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS |
|
DIN EN 15714-3:2010-02
|
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
|
16/30340536 DC : 0
|
BS EN 12627 - INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
|
I.S. EN 12334:2001
|
INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
|
I.S. EN 15714-3:2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
PREN 1171 : DRAFT 2014
|
INDUSTRIAL VALVES - CAST IRON GATE VALVES |
|
01/709787 DC : DRAFT JUN 2001
|
PREN ISO 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
|
05/30134037 DC : 0
|
EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
I.S. EN 16722:2015
|
INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS |
|
PREN 14141 : DRAFT 2011
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
BS EN 16767:2016
|
Industrial valves. Steel and cast iron check valves |
|
DIN CEN/TS 13547:2007-02
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
UNE-EN 16767:2017
|
Industrial valves - Steel and cast iron check valves |
|
01/709788 DC : DRAFT JUN 2001
|
PREN ISO 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
|
14/30301577 DC : 0
|
BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
01/709786 DC : DRAFT JUN 2001
|
PREN ISO 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
|
UNE-EN 13547:2014
|
Industrial valves - Copper alloy ball valves |
|
09/30202307 DC : 0
|
BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
|
PREN 19 : DRAFT 2014
|
INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
|
I.S. EN 13547:2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
UNI EN 1555-4 : 2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
|
I.S. EN ISO 16136:2006
|
INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
|
I.S. EN ISO 21787:2006
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
|
I.S. EN ISO 16138:2006
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
|
I.S. EN ISO 16139:2006
|
INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
|
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
|
I.S. EN ISO 16135:2006
|
INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
|
ONORM EN ISO 16139 : 2008
|
INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
|
I.S. EN ISO 16137:2006
|
INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
|
EN 12982:2009
|
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
|
DIN EN 13709:2010-10
|
Industrial valves - Steel globe and globe stop and check valves |
|
DIN EN 12982:2009-11
|
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
|
BS EN 14141:2013
|
Valves for natural gas transportation in pipelines. Performance requirements and tests |
|
BS EN 12201-4:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Valves |
|
UNE-EN 1983:2014
|
Industrial valves - Steel ball valves |
|
UNE-EN 16722:2016
|
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
|
BS EN 12288:2010
|
Industrial valves. Copper alloy gate valves |
|
BS EN ISO 16135:2006 (published 2006-03)
|
Industrial valves. Ball valves of thermoplastic materials |
|
BS EN 1555-4:2011 (published 2011-05)
|
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves |
|
BS EN 1984:2010
|
Industrial valves. Steel gate valves |
|
BS EN ISO 16139:2006 (published 2006-07)
|
Industrial valves. Gate valves of thermoplastic materials |
|
I.S. EN 12288:2010
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
I.S. EN 12982:2009
|
INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
|
EN 12288:2010
|
Industrial valves - Copper alloy gate valves |
|
EN 12201-4:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
|
EN 13547:2013
|
Industrial valves - Copper alloy ball valves |
|
EN 12570:2000
|
Industrial valves - Method for sizing the operating element |
|
EN 1349:2009
|
Industrial process control valves |
|
CEN/TS 13547:2006
|
Industrial valves - Copper alloy ball valves |
|
BS EN 1349:2009
|
INDUSTRIAL PROCESS CONTROL VALVES |
|
BS EN 15714-1:2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS |
|
PREN 13774 : DRAFT 2011
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
16/30344095 DC : 0
|
BS EN 736-1 - VALVES - TERMINOLOGY - PART 1: DEFINITION OF TYPES OF VALVES |
|
14/30296044 DC : 0
|
BS EN 16722 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH SCREWED ENDS |
|
98/717199 DC : DRAFT NOV 1998
|
PREN 13397: INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
|
PREN 13789 : DRAFT 2009
|
INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
|
PREN 13709 : DRAFT 2009
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
|
PREN 1984 : DRAFT 2009
|
INDUSTRIAL VALVES - STEEL GATE VALVES |
|
BS EN 15714-3:2009
|
Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
|
I.S. EN 593:2017
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
11/30249105 DC : 0
|
BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
|
11/30249111 DC : 0
|
BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
99/707487 DC : DRAFT JUN 1999
|
PREN 13547 - INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
01/122757 DC : DRAFT JULY 2001
|
ISO/DIS 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
|
DD CEN/TS 13547:2006
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
I.S. EN 15714-1:2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS |
|
ISO 9635-1:2014
|
Agricultural irrigation equipment Irrigation valves Part 1: General requirements |
|
ISO 16486-4:2016
|
Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 4: Valves |
|
DIN EN 12516-4:2015-01
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
EN 12516-4:2014
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
|
NF EN 1555-4 : 2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
|
ONORM EN ISO 16136 : 2008
|
INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
|
ONORM EN ISO 16137 : 2008
|
INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN 12288:2010-10
|
Industrial valves - Copper alloy gate valves |
|
DIN EN 1626:2009-01
|
CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
|
DIN EN 1171:2015-11
|
INDUSTRIAL VALVES - CAST IRON GATE VALVES |
|
DIN EN 12760:2016-07
|
INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
|
DIN EN 1984:2010-10
|
Industrial valves - Steel gate valves |
|
DIN EN 14384:2005-10
|
PILLAR FIRE HYDRANTS |
|
DIN EN 14339:2005-10
|
UNDERGROUND FIRE HYDRANTS |
|
BS EN 12266-1:2012
|
Industrial valves. Testing of metallic valves Pressure tests, test procedures and acceptance criteria. Mandatory requirements |
|
ISO 16136:2006
|
Industrial valves Butterfly valves of thermoplastics materials |
|
BS EN 12334:2001
|
INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
|
BS EN 12516-3:2002
|
Valves. Shell design strength Experimental method |
|
UNE-EN 14141:2014
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
|
UNE-EN 593:2009
|
Industrial valves - Metallic butterfly valves |
|
BS EN 13709:2002
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
|
I.S. EN 1626:2008
|
CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
|
I.S. EN 12201-4:2012
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
|
I.S. EN 1171:2015
|
INDUSTRIAL VALVES - CAST IRON GATE VALVES |
|
I.S. EN 13774:2013
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
DIN EN 12334:2004-10
|
INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
|
DIN EN 12334:2001-04
|
INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
|
I.S. EN 12266-2:2012
|
INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
|
I.S. EN 1984:2010
|
INDUSTRIAL VALVES - STEEL GATE VALVES |
|
I.S. EN 1555-4:2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
|
I.S. EN 19:2016
|
INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
|
I.S. EN 14141:2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
I.S. EN 1983:2013
|
INDUSTRIAL VALVES - STEEL BALL VALVES |
|
I.S. EN 12760:2016
|
INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
|
DIN EN 12516-3:2003-01
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
|
I.S. EN 1349:2009
|
INDUSTRIAL PROCESS CONTROL VALVES |
|
I.S. EN 13789:2010
|
INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
|
I.S. EN 13709:2010
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
|
I.S. EN 12266-1:2012
|
INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
|
UNI EN 1349 : 2010
|
INDUSTRIAL PROCESS CONTROL VALVES |
|
04/30118763 DC : DRAFT AUG 2004
|
PREN 12335 - INDUSTRIAL VALVES - CAST IRON PLUG VALVES |
|
PREN 13547 : DRAFT 1999
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
09/30205877 DC : 0
|
BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
|
05/30138208 DC : DRAFT AUG 2005
|
ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
|
I.S. EN 12567:2000
|
INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS |
|
PREN 12516-4 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
00/714962 DC : DRAFT OCT 2000
|
PREN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOF STEEL VALVE SHELLS |
|
13/30278124 DC : 0
|
BS ISO 4437-4 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
|
04/30124417 DC : DRAFT OCT 2004
|
EN 15081 - INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
|
09/30205883 DC : 0
|
BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
|
09/30205880 DC : DRAFT OCT 2009
|
BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
DIN EN 16767 E : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
16/30345749 DC : 0
|
BS EN 12516-1:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
|
01/122755 DC : DRAFT JULY 2001
|
ISO/DIS 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
|
01/709785 DC : DRAFT JUN 2001
|
PREN ISO 16136 - INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTIC MATERIALS |
|
UNI EN 15714-3 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
UNI EN 12516-1 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
|
ISO 4437-4:2015
|
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves |
|
I.S. EN 16767:2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
I.S. EN 12516-1:2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
|
UNI EN 13547 : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
I.S. CEN TS 13547:2006
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
I.S. EN 12627:2017
|
INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
|
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
|
EN 12760:2016
|
Industrial valves - Socket welding ends for steel valves |
|
EN 19:2016
|
Industrial valves - Marking of metallic valves |
|
EN 12627:2017
|
Industrial valves - Butt welding ends for steel valves |
|
ONORM EN ISO 16138 : 2008
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN 1555-4:2011-07
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
|
DIN EN 14141:2013-08
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
DIN EN ISO 16135:2006-06
|
INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN 15081 E : 2008
|
INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
|
BS EN 1074-1:2000
|
Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements |
|
BS EN ISO 16138:2006 (published 2006-03)
|
Industrial valves. Diaphragm valves of thermoplastics materials |
|
BS EN 12567:2000
|
INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS |
|
BS EN 1626:2008
|
Cryogenic vessels. Valves for cryogenic service |
|
BS EN 12570:2000
|
Industrial valves. Method for sizing the operating element |
|
ISO 16135:2006
|
Industrial valves Ball valves of thermoplastics materials |
|
UNI EN 12982 : 2009
|
INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
|
UNI EN 12570 : 2001
|
INDUSTRIAL VALVES - METHOD FOR SIZING THE OPERATING ELEMENT |
|
UNI EN 12288 : 2010
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
UNI EN 1983 : 2013
|
INDUSTRIAL VALVES - STEEL BALL VALVES |
|
UNI EN 13774 : 2013
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
EN ISO 21787:2006
|
Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
|
UNI EN 13789 : 2010
|
INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
|
UNI EN 14141 : 2013
|
VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
UNI EN 1626 : 2009
|
CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
|
UNI EN 14384 : 2006
|
PILLAR FIRE HYDRANTS |
|
UNI EN 12201-4 : 2012
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 4: VALVES FOR WATER SUPPLY SYSTEMS |
|
UNI EN 1984 : 2010
|
INDUSTRIAL VALVES - STEEL GATE VALVES |
|
UNI EN 12266-1 : 2012
|
INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
|
BS EN 1171:2015
|
INDUSTRIAL VALVES - CAST IRON GATE VALVES |
|
UNI EN 13709 : 2010
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
|
UNI EN 12266-2 : 2012
|
INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
|
DIN EN 13547:2013-12
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
14/30301146 DC : 0
|
BS EN 19 - INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
|
PREN 736-1 : DRAFT 2016
|
VALVES - TERMINOLOGY - PART 1: DEFINITION OF TYPES OF VALVES |
|
07/30166912 DC : DRAFT AUG 2007
|
BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
14/30282872 DC : 0
|
BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES |
|
PREN 12627 : DRAFT 2016
|
INDUSTRIAL VALVES - BUTT WELDING ENDS FOR STEEL VALVES |
|
05/30141776 DC : 0
|
EN 15389 - INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
|
11/30248438 DC : 0
|
BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
|
16/30339483 DC : 0
|
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
BS EN 13547:2013
|
Industrial valves. Copper alloy ball valves |
|
BS ISO 4437-4:2015
|
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Valves |
|
05/30132532 DC : DRAFT APR 2005
|
EN 12982 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
|
PREN 593 : DRAFT 2016
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
09/30202714 DC : 0
|
BS EN 12266-1 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
|
09/30202717 DC : 0
|
BS EN 12266-2 - INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
|
BS EN 16722:2015
|
INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS |
|
BS EN 12516-4 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
08/30179182 DC : DRAFT MAY 2008
|
BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
|
UNI EN 12516-4 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
UNE-EN 12516-4:2016
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
|
PREN 12288 : DRAFT 2009
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
BS EN 12516-1 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
|
EN 12516-1:2014
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
|
BS EN 12627:2017
|
Industrial valves. Butt welding ends for steel valves |
|
EN 736-1:2018
|
Valves - Terminology - Part 1: Definition of types of valves |
|
ONORM EN ISO 16135 : 2008
|
INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN ISO 21787 E : 2006
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
|
UNE-EN 12627:1999
|
Industrial valves - Butt welding ends for steel valves |
|
DIN EN ISO 16138:2006-06
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN 13789:2010-09
|
Industrial valves - Cast iron globe valves |
|
DIN EN ISO 16136:2006-06
|
INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN ISO 16137:2006-06
|
INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN ISO 16139:2006-06
|
INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN 13774:2013-05
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
BS EN 13789:2002
|
INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
|
BS EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
|
BS EN 12982:2009
|
INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
|
ISO 21787:2006
|
Industrial valves Globe valves of thermoplastics materials |
|
BS EN 14341:2006
|
INDUSTRIAL VALVES - STEEL CHECK VALVES |
|
UNE-EN 12201-4:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
|
EN 16767:2016
|
Industrial valves - Steel and cast iron check valves |
|
BS EN ISO 16137:2006 (published 2006-03)
|
Industrial valves. Check valves of thermoplastic materials |
|
BS EN ISO 21787:2006 (published 2006-03)
|
Industrial valves. Globe valves of thermoplastics materials |
|
BS EN 13397:2002
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
|
UNE-EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
|
UNE-EN 1555-4:2011
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
|
ISO 16137:2006
|
Industrial valves Check valves of thermoplastics materials |
|
BS EN ISO 16136:2006 (published 2006-03)
|
Industrial valves. Butterfly valves of thermoplastic materials |
|
UNE-EN 12760:2017
|
Industrial valves - Socket welding ends for steel valves |
|
UNE-EN 12266-2:2013
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
|
ISO 16139:2006
|
Industrial valves Gate valves of thermoplastics materials |
|
BS EN 1983:2013
|
Industrial valves. Steel ball valves |
|
UNE-EN 12982:2010
|
Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
|
UNE-EN 19:2016
|
Industrial valves - Marking of metallic valves |
|
BS EN 12266-2:2012
|
Industrial valves. Testing of metallic valves Tests, test procedures and acceptance criteria. Supplementary requirements |
|
BS EN 19:2016
|
Industrial valves. Marking of metallic valves |
|
DIN EN ISO 21787:2006-06
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
|
EN ISO 16139:2006
|
Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
|
EN 15081:2007
|
Industrial valves - Mounting kits for part-turn valve actuator attachment |
|
EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
|
EN ISO 16135:2006
|
Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
|
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
|
EN 1626:2008
|
Cryogenic vessels - Valves for cryogenic service |
|
EN 13709:2010
|
Industrial valves - Steel globe and globe stop and check valves |
|
EN ISO 16136:2006
|
Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
|
EN 15714-3:2009
|
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
|
EN 1983:2013
|
Industrial valves - Steel ball valves |
|
EN 14384:2005
|
Pillar fire hydrants |
|
EN 14339:2005
|
Underground fire hydrants |
|
EN 14141:2013
|
Valves for natural gas transportation in pipelines - Performance requirements and tests |
|
EN 1984:2010
|
Industrial valves - Steel gate valves |
|
EN 12334:2001/A1:2004
|
INDUSTRIAL VALVES - CAST IRON CHECK VALVES |
|
EN 13789:2010
|
Industrial valves - Cast iron globe valves |
|
EN ISO 16138:2006
|
Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
|
EN 15714-1:2009
|
Industrial valves - Actuators - Part 1: Terminology and definitions |
|
EN 593:2017
|
Industrial valves - Metallic butterfly valves for general purposes |
|
EN 16722:2015
|
Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
|
EN ISO 16137:2006
|
Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
|
EN 14341:2006
|
Industrial valves - Steel check valves |
|
09/30205886 DC : 0
|
BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
|
01/122758 DC : DRAFT JULY 2001
|
ISO/DIS 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
|
I.S. EN 14341:2006
|
INDUSTRIAL VALVES - STEEL CHECK VALVES |
|
UNE-EN 15714-3:2010
|
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
|
UNE-EN 15714-1:2010
|
Industrial valves - Actuators - Part 1: Terminology and definitions |
|
08/30187521 DC : 0
|
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
|
13/30271601 DC : 0
|
BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
|
01/709784 DC : DRAFT JUN 2001
|
PREN ISO 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
|
11/30243885 DC : 0
|
BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
BS EN 593:2017
|
Industrial valves. Metallic butterfly valves for general purposes |
|
09/30202313 DC : 0
|
BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
|
01/122754 DC : DRAFT JULY 2001
|
ISO/DIS 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
|
I.S. EN 12516-4:2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
DIN EN 16767:2016-08
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
BS ISO 9635-1:2014
|
AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
|
04/30118758 DC : DRAFT AUG 2004
|
PREN 12304 - INDUSTRIAL VALVES - STEEL PLUG VALVES |
|
DIN EN 15714-1:2010-02
|
Industrial valves - Actuators - Part 1: Terminology and definitions |
|
EN 1555-4:2011
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
|
I.S. EN 736-1:2018
|
VALVES - TERMINOLOGY - PART 1: DEFINITION OF TYPES OF VALVES |
|
UNI EN 15714-1 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 1: TERMINOLOGY AND DEFINITIONS |
|
16/30348709 DC : 0
|
BS EN 17070 - INDUSTRIAL VALVES - MINIMUM PERFORMANCE REQUIREMENTS |
|
DIN EN 12516-1:2015-01
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
|
UNE-EN 12516-1:2016
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
|
DIN EN 12201-4:2012-04
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves |
|
DIN EN 19:2016-07
|
INDUSTRIAL VALVES - MARKING OF METALLIC VALVES; GERMAN VERSION EN 19:2016 |
|
ONORM EN ISO 21787 : 2008
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
|
DIN EN 13397:2002-03
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
|
DIN EN 14339 E : 2005
|
UNDERGROUND FIRE HYDRANTS |
|
DIN EN 14384 E : 2005
|
PILLAR FIRE HYDRANTS |
|
UNE-EN 1171:2016
|
Industrial valves - Cast iron gate valves |
|
BS EN 14339:2005
|
Underground fire hydrants |
|
UNE-EN 12266-1:2013
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
|
ISO 16138:2006
|
Industrial valves Diaphragm valves of thermoplastics materials |
|
BS EN 14384:2005
|
PILLAR FIRE HYDRANTS |
|
BS EN 12760:1999
|
INDUSTRIAL VALVES - SOCKET WELDING ENDS FOR STEEL VALVES |
|
BS EN 15081:2007
|
INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
|
EN 13397:2001
|
Industrial valves - Diaphragm valves made of metallic materials |
|
EN 1171:2015
|
Industrial valves - Cast iron gate valves |
|
DIN EN 12266-2:2012-04
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
|
EN 1074-1:2000
|
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
|
EN 12567:2000
|
Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
|
DIN EN 15081:2008-03
|
Industrial valves - Mounting kits for part-turn valve actuator attachment |