EN 923 : 2015 COR 2016
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ADHESIVES - TERMS AND DEFINITIONS
Withdrawn date
04-20-2022
Published date
01-12-2013
Publisher
European foreword
Introduction
1 Scope
2 Terms and definitions
Annex A (informative) - Adhesives
Annex B (informative) - Adhesive joints
Alphabetical index
Gives terms used in the adhesive industry and terms relating to adhesives in those industries that use adhesives.
| Committee |
TC 193
|
| DevelopmentNote |
Supersedes PREN 923. (01/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| SN EN 923:2016 | Identical |
| UNI EN 923 : 2008 | Identical |
| I.S. EN 923:2015 | Identical |
| NS EN 923 : 2005 | Identical |
| NEN EN 923 : 2016 | Identical |
| NF EN 923 : 2016 | Identical |
| BS EN 923:2015 | Identical |
| NBN EN 923 : 2016 | Identical |
| PN EN 923 : 2016 | Identical |
| DIN EN 923:2016-03 | Identical |
| UNE-EN 923:2016 | Identical |
| BS ISO 16245:2009 | Information and documentation. Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
| DIN EN 15425:2015-06 (Draft) | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 15/30329437 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| PREN 14869-1 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| BS EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| 05/30132008 DC : DRAFT APR 2005 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| DIN EN 16556 E : 2015 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| I.S. EN 1967:2002 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| PREN 1372 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 10/30231817 DC : 0 | BS EN 12705 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| 10/30231826 DC : 0 | BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| UNI CEN/TS 14999 : 2013 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST IN STORAGE CONTAINER |
| 06/30155808 DC : DRAFT SEP 2006 | BS EN 13999-4 - ADHESIVES - SHORT-TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| DIN ISO 16245:2012-05 | Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents (ISO 16245:2009) |
| 11/30253733 DC : 0 | BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 02/121758 DC : DRAFT APR 2002 | BS EN ISO 9311-3 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 3: TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE |
| 15/30296765 DC : 0 | BS EN 15425 - ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 10/30231838 DC : DRAFT SEP 2010 | BS EN 1965-1 - STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
| 14/30296756 DC : 0 | BS EN 1902 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| 03/306598 DC : DRAFT APR 2003 | EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| 09/30206195 DC : 0 | BS EN ISO 9311-2 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
| 12/30248096 DC : 0 | BS ISO 17178 - ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| 15/30317333 DC : 0 | BS EN 205 - ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| PREN 2642 : 200P1 | AEROSPACE SERIES - STRUCTURAL ADHESIVE SYSTEMS - ADHESIVE FILM - TECHNICAL SPECIFICATION |
| UNE-EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| I.S. CR 14376:2002 | ADHESIVES - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DESCRIPTION AND ASSESSMENT OF THE SETTING PROCESS |
| PREN 1373 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| I.S. EN 301:2017 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| CEN/TR 16953:2017 | Medical gloves for single use - Guidance for selection |
| DIN EN 14258 E : 2005 | STRUCTURAL ADHESIVES - MECHANICAL BEHAVIOUR OF BONDED JOINTS SUBJECTED TO SHORT AND LONG TERMS EXPOSURE AT SPECIFIED CONDITIONS OF TEMPERATURE |
| DIN EN 13999-1:2014-03 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| DIN EN 13415:2010-05 | TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| DIN EN 14256 E : 2007 | ADHESIVES FOR NON-STRUCTURAL WOOD APPLICATIONS - TEST METHOD AND REQUIREMENTS FOR RESISTANCE TO STATIC LOAD |
| DIN EN 14259 E : 2004 | ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
| UNE-EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| UNE-EN 301:2014 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| BS EN 14869-2:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test |
| BS EN 827:2005 | Adhesives. Determination of conventional solids content and constant mass solids content |
| BS EN 1965-2:2011 | Structural adhesives. Corrosion Determination and classification of corrosion to a brass substrate |
| UNE-EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| BS EN 1246:1998 | Adhesives. Determination of ash and sulfated ash |
| BS EN 12703:2012 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature |
| BS EN ISO 14678:2005 | Adhesives. Determination of resistance to flow (sagging) |
| BS EN 14258:2004 | Structural adhesives. Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| BS EN 14713:2005 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding |
| BS EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of minimum pressing time under referenced conditions |
| BS EN 543:2003 | Adhesives. Determination of apparent density of powder and granule adhesives |
| UNE-EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| UNE-EN 13999-1:2014 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| UNE-EN 14680:2016 | Adhesives for non-pressure thermoplastics piping systems - Specifications |
| UNE-EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN ISO 9311-1:2005 | Adhesives for thermoplastics piping systems Determination of film properties |
| BS EN 1067:2005 | Adhesives. Examination and preparation of samples for testing |
| UNE-EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
| BS EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products. 180°. \'T\' peel test for a flexible-to-flexible assembly |
| DIN EN 1967:2003-02 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| I.S. EN 13999-4:2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| DIN EN 1245:2011-07 | Adhesives - Determination of pH |
| EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| DIN EN 14173:2002-04 | STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| UNI CEN ISO/TR 16178 : 2014 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS |
| EN 12961:2001/A1:2005 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF OPTIMUM ACTIVATION TEMPERATURES AND MAXIMUM ACTIVATION LIFE OF SOLVENT-BASED AND DISPERSION ADHESIVES |
| EN 12705:2011 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| CEN/TS 14999:2013 | Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container |
| EN 12704:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| EN 1243:2011 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| EN 1246:1998 | Adhesives - Determination of ash and sulphated ash |
| DIN EN 12092:2002-02 | ADHESIVES - DETERMINATION OF VISCOSITY |
| EN 12436:2001 | Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements |
| EN 1241:1998 | Adhesives - Determination of acid value |
| EN 1238:2011 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| EN 12963:2001 | Adhesives - Determination of free monomer content in adhesives based on synthetic polymers |
| DIN EN 14258:2005-02 | Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| EN 1239:2011 | Adhesives - Freeze-thaw stability |
| EN 12962:2011 | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 1245:2011 | Adhesives - Determination of pH |
| EN 12960:2001/AC:2007 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF SHEAR RESISTANCE |
| EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| EN 1242:2013 | Adhesives - Determination of isocyanate content |
| PREN 302-6 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| PREN 1238 : DRAFT 2010 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| 05/19992419 DC : DRAFT MAY 2005 | BS EN 14256 - ADHESIVES FOR NON-STRUCTURAL WOOD APPLICATIONS - TEST METHOD AND REQUIREMENTS FOR RESISTANCE TO STATIC LOAD |
| DIN 8063-10:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 10: WALL BRACKET ELBOWS - DIMENSIONS |
| 12/30259191 DC : DRAFT JULY 2012 | BS EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| 05/30131014 DC : DRAFT MAR 2005 | EN 15190 - STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
| PREN 15416-5 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 16556:2015-01 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| 11/30247568 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| ISO 19209:2017 | Adhesives — Classification of thermoplastic wood adhesives for non-structural applications |
| PREN 15416-3 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| BS ISO 19210:2017 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| 06/30155802 DC : DRAFT SEP 2006 | BS EN 13999-2 - ADHESIVES - SHORT-TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| 15/30296768 DC : 0 | BS EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| 15/30329434 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| 11/30245850 DC : 0 | BS EN 302-7 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
| 05/30135769 DC : DRAFT JUL 2005 | EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 14/30296759 DC : 0 | BS EN 1903 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| 10/30231832 DC : 0 | BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| CR 14376:2002 | Adhesives - Adhesives for paper and board, packaging and disposable sanitary products - Description and assessment of the setting process |
| 08/30180281 DC : DRAFT JUNE 2008 | BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| 11/30247565 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| PREN 15416-4 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS EN 15425:2017 | Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements |
| 15/30293506 DC : 0 | BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| PREN 15275 : DRAFT 2014 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| 04/30123591 DC : DRAFT OCT 2004 | EN 15062 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| PREN 14814 : DRAFT 2015 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| UNE-EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| ISO 17212:2012 | Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding |
| I.S. ENV 302-5:2002 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF THE CONVENTIONAL ASSEMBLY TIME |
| I.S. EN 50050:2006 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT |
| I.S. EN 15416-1:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| BS EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements |
| PD CEN/TR 16953:2017 | Medical gloves for single use. Guidance for selection |
| PREN 302-7 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
| DIN EN 15416-3 E : 2010 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN 1242:2013-05 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN 13999-2:2014-03 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| DIN EN 12962:2011-07 | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
| DIN EN 1464:2010-06 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| DIN EN 12705:2011-08 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| DIN EN 12704:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| DIN EN 1243:2011-07 | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| DIN EN 302-1:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| DIN EN 14814:2008-03 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| DIN EN 15416-5:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN ISO 9311-3:2005-06 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 3: TEST METHOD FOR THE DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE |
| DIN EN 14294:2010-06 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| DIN EN 14713:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
| DIN EN 15416-4:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS EN 1238:1999 | Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball) |
| BS EN 14259:2003 | Adhesives for floor covering. Requirements for mechanical and electrical performance |
| BS EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure. Specifications |
| BS EN 1902:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test |
| BS EN 828:2013 | Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface |
| BS EN 13999-3 : 2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
| DIN EN 15274:2015-06 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| BS EN 1244:1998 | Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| BS EN 15307:2014 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
| BS EN 1720:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of dispersability |
| UNE-EN 14022:2010 | Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
| BS EN 1967:2002 | Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| I.S. EN 827:2006 | ADHESIVES - DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT |
| I.S. EN 1242:2013 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| DIN EN 1902:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 828:2013 | ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
| I.S. EN 12704:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| I.S. EN 205:2016 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| DIN EN 1240:2011-07 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| I.S. EN 302-7:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
| I.S. EN 14259:2004 | ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
| I.S. EN 1238:2011 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| EN 14259 : 2003 | ADHESIVES FOR FLOOR COVERINGS - REQUIREMENTS FOR MECHANICAL AND ELECTRICAL PERFORMANCE |
| I.S. EN 1239:2011 | ADHESIVES - FREEZE-THAW STABILITY |
| I.S. EN 13999-2:2013 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| I.S. EN 1240:2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| I.S. EN 1067:2006 | ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| I.S. EN 12962:2011 | ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| I.S. EN 302-1:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| I.S. EN 1965-2:2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| DIN EN 1239:2011-07 | Adhesives - Freeze-thaw stability |
| DIN EN 1903:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
| I.S. EN 15307:2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| I.S. EN 14680:2015 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| I.S. EN ISO 9311-2:2011 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
| I.S. EN 1464:2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| I.S. EN 14869-1:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN 1965-1:2011 | STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
| I.S. EN 14869-2:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| I.S. EN 15416-4:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME FOR ONE COMPONENT POLYURETHANE ADHESIVES |
| I.S. EN 1966:2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| S.R. CEN/TS 14472-1:2003 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL |
| I.S. EN 14294:2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
| I.S. EN 12765:2016 | CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| I.S. EN 13999-1:2013 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| I.S. EN 14814:2016 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| I.S. EN 13999-3:2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
| I.S. EN 14293:2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| I.S. EN 302-6:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 1245:2011 | ADHESIVES - DETERMINATION OF PH |
| I.S. EN 12703:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| I.S. EN 15274:2015 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 14713:2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
| I.S. EN 12705:2011 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| I.S. EN 542:2003 | ADHESIVES - DETERMINATION OF DENSITY |
| I.S. EN 15416-5:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF CONVENTIONAL PRESSING TIME |
| I.S. EN 15275:2015 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| I.S. EN 1243:2011 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| DIN EN 15416-1:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| DIN EN 15416-4:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| DIN EN 15416-5:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 15/30317330 DC : 0 | BS EN 204 - CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| BS EN 16254 : 2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| BS EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| ISO 19210:2017 | Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints |
| PREN 12703 : DRAFT 2015 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| 14/30300568 DC : 0 | BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 03/306131 DC : DRAFT APR 2003 | EN 1067 - ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| 05/30142457 DC : 0 | BS EN 15416-1 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: STATIC LOAD TEST OF SINGLE BONDLINE SPECIMENS IN COMPRESSION SHEAR |
| 14/30296753 DC : 0 | BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 04/30123559 DC : DRAFT OCT 2004 | EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS |
| 03/306130 DC : DRAFT APR 2003 | EN 827 - ADHESIVES - DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT |
| 16/30315352 DC : 0 | BS ISO 19210 - ADHESIVES - THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| 15/30326222 DC : 0 | BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 302-5:2013-06 | Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| 07/30160818 DC : 0 | BS EN 302-5 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF THE CONVENTIONAL ASSEMBLY TIME |
| 10/30231811 DC : DRAFT SEP 2010 | BS EN 1245 - ADHESIVES - DETERMINATION OF PH |
| 10/30231808 DC : 0 | BS EN 1243 - ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| DD ENV 13999-1:2001 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
| BS ISO 16525-2:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies |
| 04/30087608 DC : DRAFT OCT 2004 | BS 6100-7 - BUILDING AND CIVIL ENGINEERING - VOCABULARY - PART 7: CONSTRUCTION PARTS |
| 13/30281051 DC : 0 | BS EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| PREN 12704 : DRAFT 2015 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| 14/30293503 DC : 0 | BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PD CEN ISO/TR 16178:2012 | Footwear. Critical substances potentially present in footwear and footwear components |
| 14/30300565 DC : 0 | BS EN 15275 - STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| 03/314567 DC : DRAFT OCT 2003 | BS EN 14814 - ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| S.R. CEN ISO/TR 16178:2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS (ISO/TR 16178:2012) |
| I.S. EN 16254:2013 | ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| I.S. EN 302-8:2017 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| I.S. EN 302-5:2013 | ADHESIVES FOR LOAD-BEARING STRUCTURES - TEST METHODS - PART 5: DETERMINATION OF MAXIMUM ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| S.R. CEN/TS 14999:2013 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST IN STORAGE CONTAINER |
| UNE-EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| PREN 1240 : DRAFT 2010 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| DIN EN 15425 E : 2008 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| I.S. EN 15425:2017 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 14257 E : 2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| NF EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| DIN EN 1372:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| DIN EN 1238:2011-07 | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
| DIN EN 1373:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| DIN EN 1966:2009-07 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN 12703:2016-10 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| DIN EN 15062 E : 2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| DIN EN 14869-2 E : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| DIN EN ISO 9311-2:2011-12 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| DIN EN 14680 E : 2015 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| DIN EN ISO 14678:2005-11 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| DIN EN 302-6:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| DIN EN 14869-1:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| DIN EN 14680:2015-12 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| BS EN 14869-1:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| UNE-EN 1242:2013 | Adhesives - Determination of isocyanate content |
| BS EN 542:2003 | Adhesives. Determination of density |
| UNE-EN 12703:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| BS EN 302-1:2013 | Adhesives for load-bearing timber structures. Test methods Determination of longitudinal tensile shear strength |
| BS EN 1965-1:2011 | Structural adhesives. Corrosion Determination and classification of corrosion to a copper substrate |
| UNE-EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| DIN EN 15274 E : 2015 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| DIN EN 15275 E : 2015 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| BS EN 13999-2:2013 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Determination of volatile organic compounds |
| UNE-EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| BS EN 12964:2001 | Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
| BS EN 14680:2015 | Adhesives for non-pressure thermoplastics piping systems. Specifications |
| DIN EN 15416-3:2010-06 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| I.S. EN 1841:1999 | ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
| EN 1719:1998 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack |
| EN 14022:2010 | Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
| EN 14493 : 2002 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| UNI EN ISO 9311-2 : 2011 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - PART 2: DETERMINATION OF SHEAR STRENGTH |
| UNI EN 12705 : 2011 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| UNI EN 14869-2 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| UNI EN 13999-4 : 2009 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| UNI EN 14869-1 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| UNI EN 13999-1 : 2014 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| UNI EN 302-6 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| UNI EN 302-7 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 7: DETERMINATION OF THE WORKING LIFE UNDER REFERENCED CONDITIONS |
| UNI EN 1240 : 2011 | ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| UNI EN 1245 : 2011 | ADHESIVES - DETERMINATION OF PH |
| UNI EN 12962 : 2011 | ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| UNI EN 13999-3 : 2009 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 3: DETERMINATION OF VOLATILE ALDEHYDES |
| UNI EN 1965-1 : 2011 | STRUCTURAL ADHESIVES - CORROSION - PART 1: DETERMINATION AND CLASSIFICATION OF CORROSION TO A COPPER SUBSTRATE |
| UNI EN 13999-2 : 2014 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| UNI EN 14256 : 2008 | ADHESIVES FOR NON-STRUCTURAL WOOD APPLICATIONS - TEST METHOD AND REQUIREMENTS FOR RESISTANCE TO STATIC LOAD |
| UNI EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| EN 13999-1:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| UNI EN 1238 : 2011 | ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| UNI EN 1242 : 2013 | ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| UNI EN 1243 : 2011 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| UNI EN 1965-2 : 2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| UNI EN 1239 : 2011 | ADHESIVES - FREEZE-THAW STABILITY |
| UNI EN 1966 : 2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| UNI EN 14294 : 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
| UNI EN 302-1 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| UNI EN 1464 : 2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| UNI EN 14022 : 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES |
| 12/30259194 DC : 0 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| S.R. CEN/TR 16953:2017 | MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION |
| ISO 16245:2009 | Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents |
| DIN EN 15416-5 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 15416-1 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| 13/30259197 DC : 0 | BS EN 16556 - ADHESIVES - DETERMINATION OF THE OPEN ASSEMBLY TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| I.S. EN 14022:2010 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES |
| BS EN 302-8:2017 | Adhesives for load-bearing timber structures. Test methods Static load test of multiple bond line specimens in compression shear |
| 16/30315349 DC : 0 | BS ISO 19209 - CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| 05/30142460 DC : 0 | BS EN 15416-2 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 2: STATIC LOAD TEST OF MULTIPLE BONDLINE SPECIMENS IN COMPRESSION SHEAR |
| PREN 14869-2 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| 14/30296750 DC : 0 | BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| PREN 13999-1 : DRAFT 2012 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| UNI ISO 16245 : 2011 | INFORMATION AND DOCUMENTATION - BOXES, FILE COVERS AND OTHER ENCLOSURES, MADE FROM CELLULOSIC MATERIALS, FOR STORAGE OF PAPER AND PARCHMENT DOCUMENTS |
| 05/30135775 DC : DRAFT JUL 2005 | EN 15275 - STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| BS ISO 19209:2017 | Adhesives. Classification of thermoplastic wood adhesives for non-structural applications |
| 10/30231805 DC : 0 | BS EN 1240 - ADHESIVES - DETERMINATION OF HYDROXYL VALUE AND/OR HYDROXYL CONTENT |
| 08/30193485 DC : 0 | BS ISO 17212 - STRUCTURAL ADHESIVES- GUIDELINES FOR THE SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING |
| PD CEN/TS 14999:2013 | Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container |
| UNE-EN 302-5:2013 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| 15/30296771 DC : 0 | BS EN 15416-1 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASSHOUSE TEST) |
| 07/30167352 DC : DRAFT AUG 2007 | BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| 10/30231835 DC : DRAFT SEP 2010 | BS EN 1965-2 - STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| BS EN 302-5:2013 | Adhesives for load-bearing structures. Test methods Determination of maximum assembly time under referenced conditions |
| UNE-EN 302-8:2017 | Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
| 15/30296777 DC : 0 | BS EN 15416-4 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| PREN 15274 : DRAFT 2014 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 10/30231814 DC : DRAFT SEP 2010 | BS EN 12962 - ADHESIVES - DETERMINATION OF ELASTIC BEHAVIOUR OF LIQUID ADHESIVES (ELASTICITY INDEX) |
| 03/105232 DC : DRAFT MAR 2003 | BS EN ISO 19952 - FOOTWEAR - VOCABULARY |
| 11/30240279 DC : DRAFT MAR 2011 | BS EN 16254 - ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| 12/30259436 DC : DRAFT JULY 2012 | BS EN 13999-2 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 2: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS |
| 11/30245847 DC : 0 | BS EN 302-6 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 05/30131552 DC : DRAFT APR 2005 | EN 1242 - ADHESIVES - DETERMINATION OF ISOCYANATE CONTENT |
| 10/30231823 DC : DRAFT SEP 2010 | BS EN 1239 - ADHESIVES - FREEZE-THAW STABILITY |
| 15/30296762 DC : 0 | BS EN 15416-5 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 16556:2014 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NONSTRUCTURAL APPLICATIONS |
| PREN 301 : DRAFT 2015 | ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 15416-1:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 1: LONG-TERM TENSION LOAD TEST PERPENDICULAR TO THE BOND LINE AT VARYING CLIMATE CONDITIONS WITH SPECIMENS PERPENDICULAR TO THE GLUE LINE (GLASS HOUSE TEST) |
| I.S. CEN TR 14548:2003 | ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES |
| ISO 17178:2013 | Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements |
| PREN 15307 : DRAFT 2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PREN 15425 : DRAFT 2015 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| PREN 1903 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| BS EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment |
| DIN EN 15416-3:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| PREN 12705 : DRAFT 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| I.S. EN 15416-3:2017+A1:2019 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENS LOADED IN BENDING SHEAR |
| DIN EN 13999-4:2009-08 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| DIN EN 1067:2006-03 | Adhesives - Examination and preparation of samples for testing |
| DIN EN 14814 E : 2016 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| DIN EN 302-7:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
| DIN EN 14022:2010-06 | STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTICOMPONENT ADHESIVES |
| CEN ISO/TR 16178:2012 | FOOTWEAR - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN FOOTWEAR AND FOOTWEAR COMPONENTS (ISO/TR 16178:2012) |
| DIN EN 14713 E : 2016 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FRICTION PROPERTIES OF FILMS POTENTIALLY SUITABLE FOR BONDING |
| DIN EN ISO 9311-1:2005-11 | Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005) |
| DIN EN 1965-2:2011-07 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| DIN EN 1965-1:2011-07 | Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
| DIN EN 14510 E : 2005 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - DETERMINATION OF SOLE POSITIONING TACK (SPOTTING TACK) |
| BS EN 14293:2006 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| UNE-EN 12704:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives |
| BS EN 1841:1999 | Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| BS EN 13999-4 : 2007 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 4: DETERMINATION OF VOLATILE DIISOCYANATES |
| BS EN 12960:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance |
| ISO 9311-1:2005 | Adhesives for thermoplastic piping systems — Part 1: Determination of film properties |
| UNE-EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
| BS EN 1241:1998 | Adhesives. Determination of acid value |
| BS EN 1464:2010 | Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method |
| ISO 19952:2005 | Footwear Vocabulary |
| BS EN ISO 15908:2002 | Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives |
| BS EN 1391:1998 | Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
| BS EN 1239:1998 | Adhesives. Freeze-thaw stability |
| BS EN 15275:2015 | Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| BS EN 1242:2013 | Adhesives. Determination of isocyanate content |
| DIN EN 15190 E : 2007 | STRUCTURAL ADHESIVES - TEST METHODS FOR ASSESSING LONG TERM DURABILITY OF BONDED METALLIC STRUCTURES |
| BS EN 1903:2015 | Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
| DIN EN 15307:2015-04 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| BS EN 1373:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
| ISO 9311-3:2005 | Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure |
| BS EN 12961:2001 | Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| BS EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation |
| UNE-EN 14294:2010 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| BS EN 14493:2002 | Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method |
| BS EN 12436:2002 | Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements |
| BS EN 12704:2012 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives |
| UNE-EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| BS EN 12963:2001 | Adhesives. Determination of free monomer content in adhesives based on synthetic polymers |
| BS EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers |
| UNE-EN 15275:2015 | Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| BS EN 12705:2011 | Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration |
| I.S. EN 1372:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| UNE-EN 15307:2015 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| UNE-EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| ISO 14678:2005 | Adhesives Determination of resistance to flow (sagging) |
| BS EN 522:1998 | Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
| BS EN 1721:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of rolling ball tack |
| UNE-EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| BS EN 302-7:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the working life under referenced conditions |
| ISO/TR 16178:2012 | Footwear Critical substances potentially present in footwear and footwear components |
| UNE-EN 13999-2:2014 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
| BS EN 1240:1998 | Adhesives. Determination of hydroxyl value and/or hydroxyl content |
| I.S. EN 13415:2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| ISO 9311-2:2011 | Adhesives for thermoplastic piping systems Part 2: Determination of shear strength |
| BS EN ISO 19952:2006 | Footwear. Vocabulary |
| BS EN 14256:2007 | Adhesives for non-structural wood applications. Test method and requirements for resistance to static load |
| BS EN 1372:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
| UNE-EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| BS EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| BS EN 1243:1999 | Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| UNE-EN 14713:2017 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
| UNE-EN 302-7:2013 | Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
| UNE-EN 828:2013 | Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
| BS EN 1245:1999 | Adhesives. Determination of pH. Test method |
| BS EN 924:2003 | Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint |
| I.S. EN 1373:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| BS EN 12701:2001 | Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials |
| BS EN 14173:2002 | Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| I.S. EN 1903:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| BS EN 302-6:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the minimum pressing time under referenced conditions |
| UNE-EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| BS EN 14292:2005 | Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature |
| UNE-EN 12765:2016 | Classification of thermosetting wood adhesives for non-structural applications |
| UNE-EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| DIN EN 15275:2015-06 | STRUCTURAL ADHESIVES - CHARACTERISATION OF ANAEROBIC ADHESIVES FOR CO-AXIAL METALLIC ASSEMBLY IN BUILDING AND CIVIL ENGINEERING STRUCTURES |
| DIN EN 15307 E : 2015 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| BS EN 12962:2001 | Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 14713:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
| EN 13999-3:2007+A1:2009 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes |
| EN 522 : 1998 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - BOND STRENGTH - MINIMUM REQUIREMENTS AND ADHESIVE CLASSIFICATION |
| EN 542:2003 | Adhesives - Determination of density |
| EN 15190:2007 | Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
| EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| EN 14510:2005 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 14292:2005 | Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature |
| EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house test) |
| EN 12092:2001 | Adhesives - Determination of viscosity |
| EN 1965-1:2011 | Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
| EN 14294:2010 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
| EN ISO 14678:2005 | Adhesives - Determination of resistance to flow (sagging) (ISO 14678:2005) |
| EN 14869-2:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 1965-2:2011 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| EN 16254:2013+A1:2016 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
| EN 1391 : 1998 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - A METHOD FOR EVALUATING THE BONDABILITY OF MATERIALS - MINIMUM REQUIREMENTS AND MATERIAL CLASSIFICATION |
| EN 543:2003 | Adhesives - Determination of apparent density of powder and granule adhesives |
| EN ISO 19952 : 2005 | Footwear - Vocabulary (ISO 19952:2005) |
| EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| EN 302-8:2017 | Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
| EN 1841:1998 | Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| EN 14256:2007 | Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
| EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005) |
| EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2011) |
| EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| EN 14173 : 2002 | STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| EN 1903:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| EN 1967:2002/AC:2005 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| EN ISO 9311-1:2005 | Adhesives for thermoplastic piping systems - Part 1: Determination of film properties (ISO 9311-1:2005) |
| EN 827:2005 | Adhesives - Determination of conventional solids content and constant mass solids content |
| EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN 1721:1998 | Adhesives for paper and board, packaging and disposable sanitary products - Track measurement for pressure sensitive adhesives - Determination of rolling ball track |
| EN 1895:2001/AC:2007 | Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" peel test for a flexible-to-flexible assembly |
| EN 924:2003 | Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint |
| EN 14258:2004 | Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| EN 14680:2015 | Adhesives for non-pressure thermoplastics piping systems - Specifications |
| EN 15425:2017 | Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements |
| EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| DIN EN 302-8:2017-05 | Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear |
| EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| EN 302-5:2013 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions |
| EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN 828:2013 | Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
| EN 15307:2014 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| EN 13999-4:2007+A1:2009 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates |
| EN 13887:2003 | Structural Adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| EN 13999-2:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
| EN 15275:2015 | Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| EN 1720:1998 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN 14293 : 2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| EN ISO 15908:2002 | Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives (ISO 15908:2002) |
| EN 12964:2001 | Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature |
| EN 14257:2006 | Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
| EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| PREN 14680 : DRAFT 2013 | ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS |
| PREN 828 : DRAFT 2010 | ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
| 10/30231820 DC : 0 | BS EN 1238 - ADHESIVES - DETERMINATION OF THE SOFTENING POINT OF THERMOPLASTIC ADHESIVES (RING AND BALL) |
| I.S. EN 14493:2002 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| PREN 1902 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| DD ENV 302-5:2002 | Adhesives for load-bearing timber structures. Test tethods Determination of the conventional assembly time |
| BS ISO 17178:2013 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| 05/30136487 DC : DRAFT JUL 2005 | EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PREN 12765 : DRAFT 2015 | CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| 15/30296774 DC : 0 | BS EN 302-8 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| 10/30231829 DC : 0 | BS EN 828 - ADHESIVES - WETTABILITY - DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND SURFACE FREE ENERGY OF SOLID SURFACE |
| DIN EN 302-8 E : 2017 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| UNI EN 12960 : 2012 | ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF SHEAR RESISTANCE |
| UNE-CEN/TS 14999:2016 EX | Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container |
| 15/30317336 DC : 0 | BS EN 12765 - CLASSIFICATION OF THERMOSETTING WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| DIN EN 15416-4 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| 06/30145736 DC : 0 | EN 15416-3 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: CREEP DEFORMATION TEST AT CYCLIC CLIMATE CONDITIONS WITH SPECIMENTS LOADED IN BENDING SHEAR |
| PD CR 14376:2002 | Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process |
| PREN 204 : DRAFT 2015 | CLASSIFICATION OF THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| PREN 1243 : DRAFT 2010 | ADHESIVES - DETERMINATION OF FREE FORMALDEHYDE IN AMINO AND AMIDOFORMALDEHYDE CONDENSATES |
| ONORM EN 14257 : 2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| NFL 17 021 : 98 PR | AEROSPACE SERIES - NON-METALLIC MATERIALS - RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES - CHARACTERISATION BY LIQUID CHROMATOGRAPHY |
| DIN EN 302-8:2015-06 (Draft) | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 8: STATIC LOAD TEST OF MULTIPLE BOND LINE SPECIMENS IN COMPRESSION SHEAR |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| BS EN 14257:2006 | Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT \'91) |
| PREN 205 : DRAFT 2015 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| ISO 16525-2:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 2: Determination of electrical characteristics for use in electronic assemblies |
| I.S. CEN TS 14999:2006 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS - ACCELERATED AGEING TEST OF ADHESIVES |
| I.S. EN 14257:2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| ISO 16525-1:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 1: General test methods |
| EN 302-7:2013 | Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions |
| DIN EN 14294 E : 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
| DIN EN 14292 E : 2005 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF STATIC LOAD RESISTANCE WITH INCREASING TEMPERATURE |
| DIN EN 14869-1 E : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| BS EN 204:2001 | Classification of thermoplastic wood adhesives for non-structural applications |
| UNE-EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
| BS EN 14294:2004 | Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes |
| BS EN 15274:2015 | General purpose adhesives for structural assembly. Requirements and test methods |
| BS EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of open assembly time under referenced conditions |
| BS EN 13887:2003 | Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| BS EN 14022:2003 | Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives |
| ISO 15908:2002 | Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives |
| BS EN 12765:2001 | Classification of thermosetting wood adhesives for non-structural applications |
| BS EN 15190:2007 | Structural adhesives. Test methods for assessing long term durability of bonded metallic structures |
| BS EN 12092:2001 | Adhesives. Determination of viscosity |
| BS EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems Determination of shear strength |
| BS EN 205:2003 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS EN 1719:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure-sensitive adhesives. Determination of loop tack |
| BS EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems Test method for the determination of resistance to internal pressure |
| BS EN 13999-1:2013 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
| DIN EN 14292:2005-09 | Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature; German version EN 14292:2005 |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
| DIN EN 827:2006-03 | Adhesives - Determination of conventional solids content and constant mass solids content |
| DIN EN 14257:2006-09 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| DIN EN 14510:2005-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 12765:2016 | Classification of thermosetting wood adhesives for non-structural applications |
| EN 12701:2001 | Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials |
| EN 12703:2016 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature |
| EN 1240:2011 | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
| EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers |
| DIN EN 14869-2:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 1244:1998 | Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| DIN EN 14814:2016-09 | ADHESIVES FOR THERMOPLASTIC PIPING SYSTEMS FOR FLUIDS UNDER PRESSURE - SPECIFICATIONS |
| DIN EN 14256:2007-10 | Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
| DIN EN 15190:2007-10 | Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
| DIN EN 14493:2003-02 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| DIN EN 15425:2008-06 | ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS |
| DIN EN 543:2003-08 | ADHESIVES - DETERMINATION OF APPARENT DENSITY OF POWDER AND GRANULE ADHESIVES |
| DIN EN 13887:2003-11 | STRUCTURAL ADHESIVES - GUIDELINES FOR SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING |
| EN 1067:2005 | Adhesives - Examination and preparation of samples for testing |
| DIN EN 14259:2004-07 | Adhesives for floor coverings - Requirements for mechanical and electrical performance |
| DIN EN 542:2003-08 | ADHESIVES - DETERMINATION OF DENSITY |
| UNE-EN 16254:2014 | Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.