EN ISO 11612:2015
Current
The latest, up-to-date edition.
Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015)
07-08-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General and design requirements
5 Sampling and pre-treatment
6 General performance requirements
7 Heat transmission performance requirements
8 Summary of flame and heat transmission tests
and corresponding letter codes
9 Optional test - Whole garment test against fire
exposure on thermal manikin
10 Marking
11 Information supplied by the manufacturer
Annex A (normative) - Mechanical pre-treatment for
metallized materials
Annex B (normative) - Determination of property values
for rating and classification
Annex C (informative) - Guidelines for clothing design
Annex D (informative) - Risk assessment
Annex E (normative) - Uncertainty of measurement
Bibliography
ISO 11612:2015 specifies performance requirements for protective clothing made from flexible materials, which are designed to protect the wearer's body, except the hands, from heat and/or flame. For protection of the wearer's head and feet, the only items of protective clothing falling within the scope of ISO 11612:2015 are gaiters, hoods, and overboots. However, concerning hoods, requirements for visors and respiratory equipment are not given.The performance requirements set out in ISO 11612:2015 are applicable to protective clothing which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes.
| Committee |
CEN/TC 162
|
| DevelopmentNote |
Supersedes EN 531. (01/2009) Supersedes UNE EN ISO 11612. (11/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 11612:2015 | Identical |
| NBN EN ISO 11612 : 2015 | Identical |
| NEN EN ISO 11612 : 2015 | Identical |
| NS EN ISO 11612 : 2008 | Identical |
| I.S. EN ISO 11612:2015 | Identical |
| PN EN ISO 11612 : 2015 | Identical |
| SN EN ISO 11612:2015 | Identical |
| UNI EN ISO 11612 : 2009 | Identical |
| UNE-EN ISO 11612:2018 | Identical |
| SS-EN ISO 11612:2015 | Identical |
| UNI EN ISO 11612:2015 | Identical |
| UNE-EN ISO 11612:2015 | Identical |
| BS EN ISO 11612:2015 | Identical |
| NF EN ISO 11612 : 2016 | Identical |
| DIN EN ISO 11612:2015-11 | Identical |
| UNE-EN ISO 11612:2010 | Identical |
| DIN EN 469:2015-08 (Draft) | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| PD CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
| 16/30318707 DC : 0 | BS EN ISO 18640-2 - PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - PHYSIOLOGICAL IMPACT - PART 2: DETERMINATION OF PHYSIOLOGICAL HEAT LOAD CAUSED BY PROTECTIVE CLOTHING WORN BY FIREFIGHTERS |
| BS PD CEN/TR 16832 : 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| PREN 469 : DRAFT 2015 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
| I.S. EN 469:2014 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| EN 469:2005/A1:2006 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| UNI EN 469 : 2014 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| ASTM F 1002 : 2015 : REDLINE | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| CEN/TR 16832 : 2015 COR 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| S.R. CEN/CLC/TR 16832:2015&LC:2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| BS EN 469:2014 | Protective clothing for firefighters. Performance requirements for protective clothing for firefighting |
| DIN EN 469:2007-02 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
| ISO 4045:2008 | Leather Chemical tests Determination of pH |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| ISO 9151:2016 | Protective clothing against heat and flame Determination of heat transmission on exposure to flame |
| ISO/TR 11610:2004 | Protective clothing — Vocabulary |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
| ISO/TR 2801:2007 | Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing |
| ISO 3071:2005 | Textiles Determination of pH of aqueous extract |
| ISO 12127-1:2015 | Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder |
| ISO 4048:2008 | Leather Chemical tests Determination of matter soluble in dichloromethane and free fatty acid content |
| ISO 17075:2007 | Leather Chemical tests Determination of chromium(VI) content |
| ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 3376:2011 | Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
| ISO 9185:2007 | Protective clothing — Assessment of resistance of materials to molten metal splash |
| ISO 13506:2008 | Protective clothing against heat and flame Test method for complete garments Prediction of burn injury using an instrumented manikin |
| ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.