EN ISO 14310:2008
Current
The latest, up-to-date edition.
11-01-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Functional specification
5.1 General
5.2 Type description
5.3 Well parameters
5.4 Operational parameters
5.5 Environmental compatibility
5.6 Compatibility with related well equipment
5.7 Design validation
5.8 Quality control
6 Technical specification
6.1 General
6.2 Technical characteristics
6.3 Design requirements
6.4 Design verification
6.5 Design validation requirements
6.6 Design changes
6.7 Design validation by scaling
6.8 Other validations
6.9 Assembly verification
7 Supplier's/manufacturer's requirements
7.1 General
7.2 Documentation and data control
7.3 Product identification
7.4 Quality control
8 Repair
9 Shipment/storage
Bibliography
ISO 14310:2008 provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industry. ISO 14310:2008 provides requirements for the functional specification and technical specification, including design, design verification and validation, materials, documentation and data control, repair, shipment, and storage. In addition, products covered by ISO 14310:2008 apply only to applications within a conduit. Installation and maintenance of these products are outside the scope of ISO 14310:2008.
| Committee |
CEN/TC 12
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN ISO 14310:2008 | Identical |
| NEN EN ISO 14310 : 2008 | Identical |
| NBN EN ISO 14310 : 2009 | Identical |
| ISO 14310:2008 | Identical |
| BS EN ISO 14310:2008 | Identical |
| PN EN ISO 14310 : 2009 | Identical |
| UNI EN ISO 14310 : 2009 | Identical |
| NF EN ISO 14310 : 2010 | Identical |
| DIN EN ISO 14310:2009-03 | Identical |
| I.S. EN ISO 14310:2008 | Identical |
| NS EN ISO 14310 : 2ED 2008 | Identical |
| SN EN ISO 14310:2009 | Identical |
| BS EN 1918-4:1998 | Gas supply systems. Underground gas storage Functional recommendations for storage in rock caverns |
| BS EN 1918-3:1998 | Gas supply systems. Underground gas storage Functional recommendations for storage in solution-mined salt cavities |
| I.S. EN 1918-1:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 1: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN AQUIFERS |
| I.S. EN 1918-3:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 3: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN SOLUTIONMINED SALT CAVERNS |
| I.S. EN 1918-2:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN OIL AND GAS FIELDS |
| I.S. EN 1918-4:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 4: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN ROCK CAVERNS |
| 14/30298608 DC : 0 | BS EN 1918-5 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES |
| PREN 1918-2 : DRAFT 2014 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS |
| PREN 1918-5 : DRAFT 2014 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES |
| BS EN 1918-2:1998 | Gas supply systems. Underground gas storage Functional recommendations for storage in oil and gas fields |
| BS EN 1918-1:2016 | Gas infrastructure. Underground gas storage Functional recommendations for storage in aquifers |
| EN 1918-3:2016 | Gas infrastructure - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns |
| EN 1918-2:2016 | Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields |
| EN 1918-4:2016 | Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns |
| EN 1918-1:2016 | Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers |
| 14/30298596 DC : 0 | BS EN 1918-2 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| BS 2M 54:1991 | Specification for temperature control in the heat treatment of metals |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| MIL-STD-413 Revision C:1980 | VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.