EN ISO 15614-13:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
01-04-2022
07-01-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preliminary welding procedure specification
5 Welding procedure test
6 Test pieces and test specimens
7 Testing and examination
8 Range of qualification
9 Welding procedure qualification record
Annex A (informative) - Example of welding
procedure qualification - Test certificate
Annex B (informative) - Example of welding
procedure qualifications record form (WPQR)
ISO 15614-13:2012 specifies tests for the qualification of welding procedure specifications applicable to upset (resistance butt) welding and flash welding of metallic materials, e.g. with solid, tubular, flat or circular cross-section. Its basic principles can also be applied to other resistance welding processes when this is stated in the specification.ISO 15614-13:2012 defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all the practical welding operations that it covers. The tests required to qualify the procedure for a particular component or assembly depend on the performance and quality requirements of the component or assembly, as defined in the design specification. The tests are intended to be carried out in accordance with the requirements of ISO 15614-13:2012, unless more severe tests are specified by the relevant application standard or specification and when these apply.ISO 15614-13:2012 covers the following resistance welding processes, as defined in ISO 4063: 24 flash welding, using direct current or alternating current with various movement sequences, constant flashing and pulsed flashing; 25 resistance upset welding, using direct current or alternating current with various pressure sequences.
| Committee |
CEN/TC 121
|
| DevelopmentNote |
Supersedes PREN ISO 15614-13. (07/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 15614-13:2012 | Identical |
| DIN EN ISO 15614-13:2012-10 | Identical |
| NEN EN ISO 15614-13 : 2012 | Identical |
| SN EN ISO 15614-13 : 2012 | Identical |
| NBN EN ISO 15614-13 : 2012 | Identical |
| UNI EN ISO 15614-13 : 2012 | Identical |
| NS EN ISO 15614-13 : 2012 | Identical |
| ISO 15614-13:2012 | Identical |
| UNE-EN ISO 15614-13:2013 | Identical |
| NF EN ISO 15614-13 : 2012 | Identical |
| BS EN ISO 15614-13:2012 | Identical |
| SS-EN ISO 15614-13:2012 | Identical |
| PN EN ISO 15614-13 : 2012 | Identical |
| DS EN ISO 15614-13 : 2012 | Identical |
| ONORM EN ISO 15614-13 : 2012 | Identical |
| 08/30184312 DC : DRAFT SEP 2008 | BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| DIN EN 12952-6:2011-10 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 04/30127152 DC : DRAFT DEC 2004 | EN ISO 17660-1 - WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD BEARING WELDED JOINTS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 12952-6:2012 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| I.S. EN 12952-6:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| BIS IS 16003 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
| SN EN ISO 15611 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PREVIOUS WELDING EXPERIENCE (ISO 15611:2003) |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| UNI EN 12952-6 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 12952-6:2011 | Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| EN 12952-6:2011 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| ISO 17643:2015 | Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis |
| ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| ISO 20482:2013 | Metallic materials — Sheet and strip — Erichsen cupping test |
| ISO 11666:2010 | Non-destructive testing of welds Ultrasonic testing Acceptance levels |
| ISO 23277:2015 | Non-destructive testing of welds Penetrant testing Acceptance levels |
| ISO 15620:2000 | Welding Friction welding of metallic materials |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO/TR 15608:2017 | Welding Guidelines for a metallic materials grouping system |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| ISO 23278:2015 | Non-destructive testing of welds Magnetic particle testing Acceptance levels |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| ISO 9015-2:2016 | Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints |
| ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| ISO 6520-2:2013 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure |
| ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
| ISO 23279:2017 | Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| ISO 9015-1:2001 | Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.