EN ISO 15616-1:2003
Current
The latest, up-to-date edition.
03-01-2003
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Acceptance test conditions
4.1 Setting up the CO[2]-laser beam machine
4.2 Power supply
4.3 Health, safety and environment
4.4 Cooling system
4.5 Gas supply and gas supply system
4.6 Operation instructions
5 Acceptance test principles
5.1 Range of system settings
5.2 Limit deviations
5.3 Precision required
5.4 Acceptance report
6 Acceptance test
6.1 General
6.2 General properties
6.3 Examination of the focused laser beam
6.4 Manipulation system precision, positioning
accuracy and trajectory exactness
6.5 Welding and cutting speed
6.6 Working gas: testing and instrumentation
Bibliography
ISO 15616-1:2003 is applicable to CO2-laser beam machines for welding and cutting in two operating directions.The main purpose of this International Standard is to provide requirements for acceptance testing of CO2-laser beam machines prior to or during installation at the user's premises. The acceptance tests are used to document the ability of CO2-laser beam machines to produce welded joints and cuts of consistent quality.ISO 15616-1:2003 is intended to be used for preparation of the technical specification for CO2-laser beam machines for high quality welding and cutting in two operating directions. It specifies basic requirements. However, this International Standard may also be used for testing as part of maintenance, as appropriate.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN ISO 15616-1:2003 | Identical |
| BS EN ISO 15616-1:2003 | Identical |
| NS EN ISO 15616-1 : 1ED 2003 | Identical |
| DIN EN ISO 15616-1 E : 2003 | Identical |
| DIN EN ISO 15616-1:2003-05 | Identical |
| ISO 15616-1:2003 | Identical |
| NBN EN ISO 15616-1 : 2003 | Identical |
| NEN EN ISO 15616-1 : 2003 | Identical |
| UNE-EN ISO 15616-1:2003 | Identical |
| NF EN ISO 15616-1 : 2003 | Identical |
| UNI EN ISO 15616-1 : 2004 | Identical |
| PN EN ISO 15616-1 : 2007 | Identical |
| SN EN ISO 15616-1 : 2003 | Identical |
| 09/30197751 DC : 0 | BS EN 4678 - AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
| BS EN 4678:2011 | Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments |
| BS EN ISO 15616-2:2003 | Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting Measurement of static and dynamic accuracy |
| 03/115225 DC : DRAFT SEP 2003 | BS EN 1011-6 - WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy |
| EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
| UNI EN 4678 : 2012 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure |
| BS EN ISO 15616-3:2003 | Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting Calibration of instruments for measurement of gas flow and pressure |
| EN ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
| EN 4678:2011 | Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments |
| EN ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
| I.S. EN 4678:2011 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| DIN EN ISO 15616-2 E : 2003 | ACCEPTANCE TESTS FOR CO[2]-LASER BEAM MACHINES FOR HIGH QUALITY WELDING AND CUTTING - PART 2: MEASUREMENT OF STATIC AND DYNAMIC ACCURACY |
| DIN EN ISO 15616-3 E : 2003 | ACCEPTANCE TESTS FOR CO[2]-LASER BEAM MACHINES FOR HIGH QUALITY WELDING AND CUTTING - PART 3: CALIBRATION OF INSTRUMENTS FOR MEASUREMENT OF GAS FLOW AND PRESSURE |
| PREN 4678 : 200P1 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| EN ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| EN 60825-4:2006/A2:2011 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| ISO 11146:1999 | Lasers and laser-related equipment Test methods for laser beam parameters Beam widths, divergence angle and beam propagation factor |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| ISO 13694:2015 | Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 2: Measurement of static and dynamic accuracy |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO 11670:2003 | Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability |
| EN ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
| EN ISO 11554:2017 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) |
| EN ISO 11146 : 1999 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR |
| ISO 230-2:2014 | Test code for machine tools Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes |
| EN ISO 11145:2016 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) |
| EN ISO 11670:2003/AC:2004 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM PARAMETERS - BEAM POSITIONAL STABILITY (ISO 11670:2003/Cor.1:2004) |
| ISO 11553:1996 | Safety of machinery — Laser processing machines — Safety requirements |
| EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| ISO 11145:2016 | Optics and photonics Lasers and laser-related equipment Vocabulary and symbols |
| ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 3: Calibration of instruments for measurement of gas flow and pressure |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.