• There are no items in your cart

EN ISO 25649-1:2017

Current
Current

The latest, up-to-date edition.

Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)
Published date

10-11-2017

European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and criteria to distinguish
  floating leisure articles from aquatic toys
5 General safety requirements and test methods
  related to all classes
6 Material requirements and test methods
7 Durability of warnings and markings
Annex A (normative) - Templates
Annex B (informative) - Examples of openings
Bibliography

ISO 25649-1:2017 specifies safety requirements and test methods related to materials, safety, performance for classified floating leisure articles for use on and in water in accordance with Clause 4 (see Table 1).ISO 25649-1:2017 is only applicable with ISO 25649‑2 and the relevant specific parts (ISO 25649‑3 to ISO 25649‑7).NOTE 1 Specific safety requirements are specified in ISO 25649‑3 to ISO 25649‑7.NOTE 2 The specific parts can include exclusions from the general requirements specified in this document and/or ISO 25649‑2.ISO 25649-1:2017 is not applicable to:- aquatic toys according to European Directive 2009/48/EC (use in shallow waters/use under supervision);- inflatable boats with a buoyancy > 1 800 N according to European Directive 94/25/EC;- buoyant aids for swimming instructions according to European Directive 89/686/EEC;- air mattresses which are not specifically designed or intended for use on the water (e.g. velour bed, self inflating mattress and rubberized cotton air mattress);- floating seats for angling purposes;- surf sports type devices (e.g. body boards, surf boards);- water ski, wakeboard or kite surfing board;- devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic;- devices which are kept in shape by permanent air flow;- rings intended for use on water slides;- wading devices.

Committee
CEN/TC 136
DevelopmentNote
Supersedes EN 15649-1. (10/2017)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

EN 13138-3:2014 Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
ISO 105-E04:2013 Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration
ISO 4675:2017 Rubber- or plastics-coated fabrics — Low-temperature bend test
ISO 105-A03:1993 Textiles Tests for colour fastness Part A03: Grey scale for assessing staining
89/686/EEC : 1989 AMD 5 2012 COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
EN 16051-1:2012 Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters
EN 12402 : 1999 LEAD AND LEAD ALLOYS - METHODS OF SAMPLING FOR ANALYSIS
ISO 6185-1:2001 Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kW
ISO 2411:2017 Rubber- or plastics-coated fabrics — Determination of coating adhesion
1994/25/EC : 1994 DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT
EN 13138-2:2014 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held
ISO 105-E03:2010 Textiles Tests for colour fastness Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
ISO 25649-2:2017 Floating leisure articles for use on and in the water Part 2: Consumer information
EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties
EN 16051-2:2012 Inflation devices and accessories for inflatable consumer products - Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators
EN 14960:2013 Inflatable play equipment - Safety requirements and test methods
ISO 105-X12:2016 Textiles Tests for colour fastness Part X12: Colour fastness to rubbing
EN 20105-A03 : 1994 TEXTILES - TESTS FOR COLOUR FASTNESS - PART A03: GREY SCALE FOR ASSESSING STAINING
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
EN 20105-A02 : 1994 TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993)
ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
ISO 6185-2:2001 Inflatable boats Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive
ISO 3011:1997 Rubber- or plastics-coated fabrics Determination of resistance to ozone cracking under static conditions
EN 13138-1:2014 Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn
ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.