EN ISO 3746:2010

Current

Current The latest, up-to-date edition.

Add to Watchlist

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

Please log in or create an account to add this standard to your Watchlist.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

Available format(s):

Language(s):

Published date: 12-01-2010

Publisher: Comite Europeen de Normalisation

Add to Watchlist

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test environment
5 Instrumentation
6 Definition, location, installation and operation of noise
   source under test
7 Reference box and measurement surface
8 Determination of sound power levels and sound energy levels
9 Measurement uncertainty
10 Information to be recorded
11 Test report
Annex A (normative) - Determination of the environmental
        correction
Annex B (normative) - Microphone arrays on a hemispherical
        measurement surface
Annex C (normative) - Microphone arrays on a parallelepiped
        measurement surface
Annex D (informative) - Guidelines on the development of
        information on measurement uncertainty
Bibliography
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         2006/42/EC

Abstract - (Show below) - (Hide below)

ISO 3746:2010 specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping a noise source (machinery or equipment) in a test environment for which requirements are given. The sound power level (or, in the case of noise bursts or transient noise emission, the sound energy level) produced by the noise source with frequency A-weighting applied is calculated using those measurements.The methods specified in ISO 3746:2010 are suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001.ISO 3746:2010 is applicable to all types and sizes of noise source (e.g. stationary or slowly moving plant, installation, machine, component or sub-assembly), provided the conditions for the measurements can be met.The test environments that are applicable for measurements made in accordance with ISO 3746:2010 can be located indoors or outdoors, with one or more sound-reflecting planes present on or near which the noise source under test is mounted.Information is given on the uncertainty of the sound power levels and sound energy levels determined in accordance with ISO 3746:2010, for measurements made with frequency A-weighting applied. The uncertainty conforms with that of ISO 12001:1996, accuracy grade 3 (survey grade).

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 211
Development Note	Supersedes PREN ISO 3746. (11/2010)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current
Supersedes	PREN ISO 3746 : DRAFT 2009 EN ISO 3746:1995

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNE-EN ISO 3746:2010	Identical
SN EN ISO 3746:2011	Identical
NS EN ISO 3746 : 2010	Identical
ISO 3746:2010	Identical
DIN EN ISO 3746:2011-03	Identical
BS EN ISO 3746:2009	Identical
NF EN ISO 3746 : 2012	Identical
PN EN ISO 3746 : 2011	Identical
I.S. EN ISO 3746:2010	Identical
UNI EN ISO 3746 : 2011	Identical
SS-EN ISO 3746 : 2010	Identical
NBN EN ISO 3746 : 2011	Identical
NEN EN ISO 3746 : 2010	Identical
BS EN ISO 3746:2010	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

12/30255086 DC : 0	BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNE-EN 15163:2018	Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
BS EN 16564:2014	Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
BS EN 12102:2013	Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level
I.S. EN 740:1999	ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS
11/30232437 DC : 0	BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 12639:2000	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
09/30179854 DC : 0	BS EN 13114:2002/A1 - TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
02/124462 DC : DRAFT DEC 2002	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
04/30106849 DC : DRAFT MAY 2004	EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
BS EN 16232 : 2013	CHILD USE AND CARE ARTICLES - INFANT SWINGS
I.S. EN 12415:2000	SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
12/30261215 DC : 0	BS EN 13060 - SMALL STEAM STERILIZERS
I.S. EN 691-1:2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 415-8:2008	Safety of packaging machines Strapping machines
BS EN 14886:2008	PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
08/30165047 DC : DRAFT JUNE 2008	BS EN ISO 9906 - ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS
03/306044 DC : DRAFT APR 2003	BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
16/30337092 DC	BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
10/30233949 DC : 0	BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
11/30251974 DC : 0	BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 16564 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
12/30253910 DC : DRAFT JULY 2012	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
I.S. EN 50569:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
PREN 1870-3 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
DIN EN 16564:2015-04	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
I.S. EN 13128:2001	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
I.S. EN 14070:2003	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
PREN 14180 : DRAFT 2012	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
03/313810 DC : 0	EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
11/30237569 DC : 0	BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
09/30179845 DC : 0	BS EN 13112:2002/A1 - TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY
BS EN 16252:2012	Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
11/30249223 DC : 0	BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
I.S. EN 50571:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
I.S. EN 415-9:2009	SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3
09/30197984 DC : 0	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
PREN 285 : DRAFT 2013	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
08/30182359 DC : DRAFT AUG 2008	BS EN 12981 AMD1 - COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
13/30276226 DC : 0	BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 15180:2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13035-11 : 2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
DIN EN 1807-1:2013-06	Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
PREN 13060 : DRAFT 2012	SMALL STEAM STERILIZERS
DIN EN 14886 E : 2008	PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
PREN 15572 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
DIN EN 16486:2014-10	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
BS EN 50570:2013	Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers
I.S. EN 62109-1:2010	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
PREN 15163 : DRAFT 2014	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
I.S. EN 378-2:2016	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
CEI EN 50569 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
PREN 1870-12 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN 1807-2:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 16564:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN 16500:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN 50570:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
I.S. EN 60034-9:2005	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
UNI EN 15180 : 2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 16500:2015	Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
16/30314039 DC : 0	BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 50569:2013	Household and similar electrical appliances. Safety. Particular requirements for commercial electric spin extractors
UNI EN 16232 : 2013	CHILD USE AND CARE ARTICLES - INFANT SWINGS
UNI EN 12102 : 2014	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
EN 285:2015	Sterilization - Steam sterilizers - Large sterilizers
DIN EN 13379:2016-06 (Draft)	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 415-7:2009-12	Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 415-5:2010-04	Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
DIN EN 13378:2016-05 (Draft)	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1870-7:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 14238 E : 2010	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
DIN EN 1422:2014-08	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 13355:2010-06	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 1870-12:2014-03	Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
DIN EN 15036-1:2006-12	Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
DIN EN 1870-16:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 12012-3:2010-02	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN 1870-9:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 13418:2013-08	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
DIN EN 1870-3:2015-02	Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
I.S. EN 861:2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNE-EN 378-2:2017	Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
BS EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing General requirements
BS EN 13035-3 : 2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
BS EN 13042-3 : 2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNE-EN 1870-4:2012	Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
UNE-EN 13977:2012	Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
BS EN 12111:2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
BS EN 13128 : 2001	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
BS EN 859 : 2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNE-EN 1870-7:2013	Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 13418:2013	Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
BS EN 1870-9:2012	Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
BS EN 1870-15:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
BS EN 14462:2015	Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
BS EN 12622 : 2009	SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
BS EN 62477-1 : 2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
BS EN 13218 : 2002	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
BS EN 13378 : 2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15067:2007	PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
I.S. EN 13977:2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
UNI EN 1218-5 : 2010	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 1870-16:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
I.S. EN 13289:2001	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
EN 12545:2000+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
EN 1265:1999+A1:2008	Safety of machinery - Noise test code for foundry machines and equipment
EN 13418:2013	Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
DIN EN 15067:2008-03	Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 13023:2003+A1:2010	Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
EN 1114-1:2011	Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 12012-4:2006+A1:2008	Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
DIN EN 14070:2009-07	SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
EN 13379:2001+A1:2013	Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements
EN 12639:2000/AC:2004	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
EN 12182:2012	Assistive products for persons with disability - General requirements and test methods
EN 12102:2013	Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
EN 13112:2002+A1:2009	Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 60034-9:2005/A1:2007	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
EN 12354-5:2009/AC:2010	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
EN 1218-3:2001+A1:2009	Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
EN 12717:2001+A1:2009	Safety of machine tools - Drilling machines
EN 13378:2001+A1:2013	Pasta processing plants - Pasta presses - Safety and hygiene requirements
EN 12267:2003+A1:2010	Food processing machinery - Circular saw machines - Safety and hygiene requirements
NF EN 201 : 2009	PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
EN 13114:2002+A1:2009	Tannery machines - Rotating process vessels - Safety requirements
EN 12599:2012	Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems
EN 1807-1:2013	Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
NF EN 1218-1 : 2000 + A1 2009	SAFETY OF WOOD WORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
EN 13113:2002+A1:2010	Tannery machines - Roller coating machines - Safety requirements
EN 12478:2000/AC:2001	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
EN 12215:2004+A1:2009	Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 13289:2001+A1:2013	Pasta processing plants - Dryers and coolers - Safety and hygiene requirements
EN 12622:2009+A1:2013	Safety of machine tools - Hydraulic press brakes
EN 13355:2004+A1:2009	Coating plants - Combined booths - Safety requirements
EN 1218-4:2004+A2:2009	Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
EN 13035-9:2006+A1:2010	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
EN 12012-3:2001+A1:2008	Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 13042-3:2007+A1:2009	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
EN 12417:2001+A2:2009/AC:2010	MACHINE TOOLS - SAFETY - MACHINING CENTRES
EN 12012-2:2001+A2:2008	Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
UNI EN 1218-1 : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
I.S. EN 12354-5:2009	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
DIN EN 16252:2013-03	Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
PREN 1422 : DRAFT 2011	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
I.S. EN 16232:2013	CHILD USE AND CARE ARTICLES - INFANT SWINGS
09/30181661 DC : 0	BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
11/30237566 DC : 0	BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
UNE-EN 1870-13:2008	Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
BS EN 1870-19:2013	Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws
12/30262894 DC : 0	BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
11/30249083 DC : 0	BS EN 60335-2-58:2005/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
15/30326831 DC : 0	BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
I.S. EN 12840:2001	SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
UNI EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
UNI EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN 1870-2:1999	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
04/30122794 DC : DRAFT SEP 2004	EN 15036-1 - HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS AT PLACE OF INSTALLATION
EN 1218-5:2004+A1:2009	Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
DIN EN 16486 E : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
12/30259067 DC : 0	BS EN 71-1:2011/A2 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
PREN 1672-1 : DRAFT 2012	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNI EN 13035-11 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
16/30322398 DC : 0	BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
02/121895 DC : DRAFT APR 2002	BS EN 13060 - SMALL STEAM STERILIZERS
BS EN 60076-10:2016	Power transformers Determination of sound levels
09/30198762 DC : 0	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
03/306594 DC : DRAFT APR 2003	BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE
11/30252448 DC : 0	BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
PREN 1114-3 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 15571:2015-03	Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
11/30237557 DC : 0	BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1807-2:2013-06	Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
I.S. EN ISO 3740:2000	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
12/30232434 DC : 0	BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
12/30259421 DC : 0	BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
BS EN 415-9:2009	Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
03/306593 DC : DRAFT APR 2003	BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
UNE-EN 691-1:2013	Safety of woodworking machines - Part 1: Common requirements
12/30271386 DC : 0	BS EN 12102 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
PREN 1870-11 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
11/30240323 DC : 0	BS EN 16252 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
09/30178325 DC : DRAFT FEB 2009	BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
PREN 12012-1 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS
04/102838 DC : DRAFT JAN 2004	EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
12/30270038 DC : 0	BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
11/30244804 DC : 0	BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
03/118895 DC : 0	EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
BS EN 16486:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
PREN 13053 : DRAFT 2017	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
PREN 14462 : DRAFT 2012	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
BS 5724-2.204(1999) : 1999	ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS
13/30276223 DC : 0	BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN 12012-4 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
02/101175 DC : DRAFT FEB 2002	BS EN 500-4 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
PREN 12599 : DRAFT 2010	VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
04/301783 DC : DRAFT JAN 2004	EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
BS EN 1672-1:2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
I.S. EN 16486:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
00/715016 DC : DRAFT OCT 2000	PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
CSA Z107.58 : 2015	NOISE EMISSION DECLARATIONS FOR MACHINERY
BS EN 61010-1:2010+A1:2019	Safety requirements for electrical equipment for measurement, control, and laboratory use General requirements
I.S. EN 60310:2016	RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK
UNI EN 16252 : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
UNI EN 16486 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
PREN 1870-6 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 15180:2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12102:2013	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
I.S. EN 1672-1:2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
BS EN 50416 : 2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
CEI EN 50570 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
UNI EN 415-9 : 2010	SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3
CEI EN 60076-10 : 2002	POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS
PREN 12182 : 2009-06	ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
UNE-EN 50569:2014	Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
PREN 289 : DRAFT 2012	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 12012-1 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
EN ISO 3740 : 2000	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
EN 12013:2018	Plastics and rubber machines - Internal mixers - Safety requirements
BS EN ISO 3740:2001	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
EN 61010-1:2010	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
I.S. EN 1870-6:2017	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
I.S. EN 13053:2006	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
NF EN 13053 : 2006 + A1 2011	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
DIN EN 12215:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12267:2011-02	Food processing machinery - Circular saw machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13114:2010-03	Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
DIN EN 1807:2010-02	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 13128:2009-09	SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
DIN EN 1870-14:2012-06	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 12957:2009-07	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 12182:2012-07	Assistive products for persons with disability - General requirements and test methods
DIN EN 13112:2011-03	Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
DIN EN 12301:2015-12 (Draft)	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 12354-5:2009-10	Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment
DIN EN 12417:2009-07	MACHINE TOOLS - SAFETY - MACHINING CENTRES
DIN EN 1417:2015-03	PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
DIN EN 1870-13:2013-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 1265:2009-07	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 1870-10:2013-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1870-8:2013-03	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 1218-1:2010-02	Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
DIN EN ISO 11688-2:2001-03	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000
DIN EN 14462 E : 2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
DIN EN 14681:2010-10	Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN 693:2011-11	MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
DIN EN 13035-9:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010)
DIN EN 13042-3:2010-05	Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
DIN EN 14656:2010-10	Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 14238:2010-02	Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009)
DIN EN 13035-3:2010-02	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
BS EN 1870-2:1999	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
BS EN 12599:2012	Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems
BS EN 14238 : 2004	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
UNE-EN 289:2014	Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
BS EN 14673 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
BS EN 1870-7:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
BS EN 940 : 2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS EN 13355 : 2004	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNE-EN 1870-10:2013	Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN 13379 : 2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 13418:2013	Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
I.S. EN 12215:2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 12717:2001	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
I.S. EN 1870-8:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 13114:2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
I.S. EN 289:2014	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 1218-4:2009-12	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
I.S. EN 14656:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 12012-2:2010-02	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 13035-9:2006	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
I.S. EN 1870-10:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
I.S. EN 13379:2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12622:2009	SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
I.S. EN 1218-2:2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
I.S. EN 1870-11:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 13113:2002	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12267:2003	FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1870-1:1999-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN 14238:2004	CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
I.S. EN 1870-12:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
DIN EN 1218-3:2009-12	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1870-9:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-3:2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
I.S. EN 13378:2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13218:2010-09	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
DIN EN 13053:2012-02	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011)
EN 16564:2014	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
I.S. EN 12182:2012	ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 12750:2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 1265:2000	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 12639:2000-06	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND 3 OF ACCURACY
I.S. EN 12629-1:2000	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
I.S. EN 13035-3:2003	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
I.S. EN 1870-15:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1114-1:2011	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
I.S. EN 1870-17:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 13418:2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
I.S. EN 12111:2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
I.S. EN 12599:2012	VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
DIN EN 1807:1999-10	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
I.S. EN 14681:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 13218:2002-09	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
I.S. EN 1218-5:2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 1218-3:2002	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1870-14:2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
I.S. EN 13985:2003	MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
I.S. EN 13355:2005	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 201:2009	PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12545:2000	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
I.S. EN 12012-3:2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
I.S. EN 13042-3:2007	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
EN 15571:2014	Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
I.S. EN 1218-1:2000	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
I.S. EN 12012-2:2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 940:2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
I.S. EN 415-5:2006	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
I.S. EN 1422:2014	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
I.S. EN 1417:2014	PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
DIN EN 13788:2002-04	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
DIN EN 14180:2003-10	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 13378:2013-05	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14673:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 13289:2013-05	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14180:2014	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN 13112:2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1870-5:2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 12012-2:2004-03	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
DIN EN 13379:2013-05	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1970:2005-10	ADJUSTABLE BEDS FOR DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
DIN EN 12957:2001-12	MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
I.S. EN 13023:2003	NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3
I.S. EN 14462:2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
I.S. EN 1870-7:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-4:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 415-7:2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
DIN EN 1422:1997-11	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
UNI EN 940 : 2012	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
VDI 2715:2011-11	Noise control in heating systems
VDI 3930:1998-05	Cooling and heating of waste gases
VDI 3743 Blatt 1:2003-09	Characteristic noise emission values of technical sound sources - Pumps; Centrifugal pumps
08/30178810 DC : DRAFT MAY 2008	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN 13035-11:2010-07	Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010)
UNI EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 12012-1:2015-05 (Draft)	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
DIN EN 415-9:2010-02	Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
UNI EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
I.S. EN 285:2015	STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
CEI EN 50571 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
DIN EN 1672-1:2014-12	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
I.S. EN 13788:2002	MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
I.S. EN 848-1:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 15180:2015-01	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
PREN 13379 : DRAFT 2016	PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
11/30231787 DC : 0	BS EN 1870-14:2007+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
11/30248966 DC : 0	BS EN 50416: 2005/FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
10/30232428 DC : DRAFT DEC 2010	BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
BS EN 1870-18:2013	Safety of woodworking machines. Circular sawing machines Dimension saws
BS EN 60335-2-58 : 2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
DIN EN 1870-19 E : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
EN 1218-1:1999+A1:2009	Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
12/30253907 DC : DRAFT JULY 2012	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
10/30233212 DC : 0	BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
UNE-EN 62006:2011	Hydraulic machines - Acceptance tests of small hydroelectric installations
BS EN 1807-2:2013	Safety of woodworking machines. Band sawing machines Log sawing machines
14/30301841 DC : 0	BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
10/30232431 DC : DRAFT DEC 2010	BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
15/30329716 DC	BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
09/30201992 DC : 0	BS EN 12182 - ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
13/30291774 DC : 0	BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
13/30278676 DC : 0	BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 1807-1:2013	Safety of woodworking machines. Band sawing machines Table band saws and band re-saws
04/30126355 DC : DRAFT DEC 2004	ISO 20361 - LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
11/30249086 DC : 0	BS EN 60335-2-64:2000/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-64: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC KITCHEN MACHINES
04/30110326 DC : DRAFT APR 2004	EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
05/30133728 DC : DRAFT MAY 2005	EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
BS EN 50571:2013	Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines
11/30237563 DC : 0	BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN 16564:2015	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
10/30235574 DC : 0	BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
05/30133333 DC : DRAFT MAY 2005	EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
05/30133297 DC : DRAFT MAY 2005	EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
04/301784 DC : DRAFT JAN 2004	EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
BS EN 61243-5:2001	Live working. Voltage detectors Voltage detecting systems (VDS)
UNE-EN 1807-1:2013	Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN 415-10:2014-07	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
EN 71-1:2014	Safety of toys - Part 1: Mechanical and physical properties
EN 16232:2013	Child use and care articles - Infant swings
PREN 71-1 : DRAFT 2014	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
EN 16252:2012	Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
PREN 50570 : DRAFT 2011	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
EN 50569:2013/A1:2018	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
UNE-EN 1870-6:2003	Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
UNI EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
17/30362886 DC : 0	BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS
EN 13060:2014	Small steam sterilizers
I.S. EN 15163:2017	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
UNI EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 50416:2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
16/30338566 DC : 2016-06	BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
EN 378-2:2016	Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
I.S. EN 12013:2018	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
PREN 1870-10 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN 1870-14:2008	Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
PREN 12102 : DRAFT 2012	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
PREN 12301 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
EN 62006:2011	Hydraulic machines - Acceptance tests of small hydroelectric installations
PREN 50569 : DRAFT 2011	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
DIN EN 71-1:2015-02	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 61010-1:2010/A1:2019	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 60076-10:2016	POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS
I.S. EN 14886:2008	PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
DIN EN 1870-11:2014-02	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 12750:2013-05	Safety of woodworking machines - Four sided moulding machines
DIN EN 1870-17:2015-06	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 12622:2014-02	Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)
DIN EN 1870-15:2013-01	Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
DIN EN 12545:2010-07	Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements (includes Amendment A1:2009)
DIN EN 13023:2010-08	Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 (includes Amendment A1:2010)
DIN EN 12717:2009-07	SAFETY OF MACHINE TOOLS - DRILLING MACHINES
DIN EN 13113:2011-05	Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
DIN EN 13060:2015-03	SMALL STEAM STERILIZERS
DIN EN 13035-3 E : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 848-3:2013-01	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 860:2012-09	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN 13736:2009-11	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
DIN EN 692:2009-10	Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
DIN EN 13035-9 E : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
DIN EN 848-1:2013-01	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 285:2016-05	Sterilization - Steam sterilizers - Large sterilizers
DIN EN 12629-1:2011-01	Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 848-2:2013-01	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
DIN EN 15067 E : 2008	PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
DIN EN 13985:2009-11	Machine tools - Safety - Guillotine shears (includes Amendment A1:2009)
DIN EN 13042-3 E : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
DIN EN 14673:2010-10	Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 14462:2015-08	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
BS EN 848-1 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
BS EN 12629-1 : 2001	MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 12478:2001	SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
BS EN 1417:2014	Plastics and rubber machines. Two-roll mills. Safety requirements
BS EN ISO 9905 : 1998	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
BS EN 1218-2 : 2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
BS EN 13898 : 2003	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
BS EN 861 : 2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNE-EN 62109-1:2011	Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
BS EN 12215 : 2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNE-EN 1870-8:2013	Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN 848-2 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
BS EN 13053 : 2006	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
CEI EN 60519-1 : 2016	SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
UNE-EN 848-1:2008	Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
UNE-EN 61010-1:2011	Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
UNE-EN 848-3:2013	Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
UNE-EN 693:2001	Machine tools - Safety - Hydraulic presses
I.S. EN 848-2:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
EN 16486:2014	Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
EN 13985:2003+A1:2009	Machine tools - Safety - Guillotine shears
EN 1970:2000/A1:2005	ADJUSTABLE BEDS FOR DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
EN 1870-15:2012	Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
UNI EN 12599 : 2012	VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
UNI EN 13035-9 : 2010	MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
UNI EN 1265 : 2009	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
UNI EN 1870-8 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
UNI EN 1870-13 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
UNI EN 13379 : 2013	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13113 : 2010	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNI EN 12545 : 2009	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
UNI EN 1870-15 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
UNI EN 13736 : 2009	SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
UNI EN 13977 : 2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE