EN ISO 4042:1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999)
Superseded date
12-03-2019
Published date
01-12-2013
Publisher
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensional requirements and gauging
5 Other coating requirements
6 Hydrogen embrittlement relief
7 Corrosion protection
8 Applicability to fasteners that cut or form their own
mating threads
9 Specification of coating thickness
10 Measurement of coating thickness
11 Sampling for thickness tests
12 Ordering requirements for electroplating
13 Designation
Annex A (informative) - Hydrogen embrittlement relief
Annex B (informative) - Salt spray corrosion protection
performance of metallic coatings
Annex C (informative) - Guidance on procedures that may be
adopted to accommodate thick coatings
Annex D (normative) - Determination of batch average thickness
Annex E (normative) - Designation code, system A, for
electroplated coatings on threaded parts
Annex F (informative) - Examples for coating designation
Annex G (informative) - Surface areas of bolts, screws and nuts
Annex ZA (normative) - Normative references to international
publication with their relevant
European publications
Bibliography
Defines dimensional requirements for electroplated fasteners of steel or copper alloy.
| Committee |
TC 185
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN ISO 4042 : 1999 | Identical |
| UNI EN ISO 4042 : 2003 | Identical |
| DIN EN ISO 4042:2018-11 | Identical |
| NBN EN ISO 4042 : 1ED 99 | Identical |
| ONORM EN ISO 4042 : 1999 | Identical |
| NS EN ISO 4042 : 1ED 1999 | Identical |
| NF EN ISO 4042 September 2018 | Identical |
| I.S. EN ISO 4042:2018 | Identical |
| SN EN ISO 4042 : 1999 | Identical |
| NF EN ISO 4042 : 1999 | Identical |
| PN EN ISO 4042 : 2001 | Identical |
| ISO 4042:2018 | Identical |
| ÖNORM EN ISO 4042: 2019 01 01 | Identical |
| UNE-EN ISO 4042:2000 | Identical |
| BS EN ISO 4042:2000 | Identical |
| NEN EN ISO 4042:2018 | Identical |
| UNI EN ISO 4042 :2018 | Identical |
| I.S. EN ISO 4042:1999 | Identical |
| ISO 4042:1999 | Identical |
| PN-EN ISO 4042:2018-11 | Identical |
| DIN EN ISO 4042:2001-01 | Identical |
| DIN 434:2000-04 | SQUARE TAPER WASHERS FOR U - SECTIONS |
| 10/30234613 DC : DRAFT NOV 2010 | BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| BS EN 50216-12:2011 | Power transformer and reactor fittings Fans |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN EN 14218 E : 2003 | HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD |
| 10/30234628 DC : 0 | BS EN 14420-6 - HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN 13001-3-1 : 2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| UNI EN 13001-3-1 : 2013 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 14/30297831 DC : 0 | BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| DIN EN ISO 10669:1999-11 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999); German version EN ISO 10669:1999 |
| BS EN ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| BS EN ISO 7089:2000 | Plain washers. Normal series. Product grade A |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| BS EN ISO 15482:1999 | Cross recessed countersunk head drilling screws with tapping screw thread |
| BS EN ISO 10669:1999 | Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A |
| BS EN ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head. St/St |
| BS EN 14218:2003 | Hexagon nuts with flange. Fine pitch thread |
| BS EN 1662:1998 | Hexagon bolts with flange. Small series |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| I.S. EN 14424:2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| DIN EN 13411-5:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 13001-3-1:2012+A2:2018 | Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
| EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 14219 E : 2003 | HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| PREN 14420-6 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 13411-5 E : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| DIN EN 1664:1998-02 | PREVAILING TORQUE TYPE - ALL-METAL HEXAGON NUTS WITH FLANGE |
| DIN EN 14422:2013-09 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| DIN EN 14424:2013-09 | HOSE FITTINGS WITH SCREWED FERRULES |
| BS EN ISO 10666:1999 | Drilling screws with tapping screw threads. Mechanical and functional properties |
| UNE-EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| BS EN ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protruding head. St/St |
| BS EN 1665:1997 | Hexagon bolts with flange. Heavy series |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 14420-6:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| I.S. EN ISO 7085:2000 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 14422:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| DIN EN 14420-6:2013-09 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| I.S. EN 13411-5:2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| DIN EN 1090-5 E : 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| 10/30234607 DC : 0 | BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| DIN 435:2000-01 | SQUARE TAPER WASHERS FOR I-SECTIONS |
| 08/30181655 DC : DRAFT SEP 2008 | BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| PREN 14420-4 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| I.S. EN ISO 7091:2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| DIN EN 1663:1998-02 | PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT) |
| DIN EN 1667:1998-02 | PREVAILING TORQUE TYPE ALL HEXAGON NUTS WITH FLANGE, WITH METRIC FINE PITCH THREAD |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| DIN EN ISO 4762:2004-06 | Hexagon socket head cap screws (ISO 4762:2004) |
| DIN EN 14424 E : 2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 14422 E : 2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| BS EN 1664:1998 | Prevailing torque type all-metal hexagon nuts with flange |
| BS EN ISO 15480:1999 | Hexagon washer head drilling screws with tapping screw thread |
| EEMUA 158 : 2014 | CONSTRUCTION SPECIFICATION FOR FIXED OFFSHORE STRUCTURES |
| EN ISO 4759-1 : 2000 | TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
| EN 1666:1997 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified) |
| EN ISO 15980 : 2002 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD ST/ST |
| EN ISO 7085 : 1999 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| UNI EN 14420-6 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS |
| I.S. EN ISO 7094:2000 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| UNI EN 13411-5 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| UNI EN 14424 : 2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| UNI EN 14219 : 2006 | HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES |
| UNI EN 14420-3 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| UNI EN 14420-5 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| UNI EN 14422 : 2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
| UNI EN 14420-4 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| PREN 14424 : DRAFT 2010 | HOSE FITTINGS WITH SCREWED FERRULES |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| 08/30173031 DC : DRAFT JAN 2008 | BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| DIN EN 1515-4 E : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| I.S. EN 13001-3-1:2012 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 1666:1998-02 | PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT), WITH METRIC FINE PITCH THREAD |
| DIN EN ISO 7093-2:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| BS EN 1661:1998 | Hexagon nuts with flange |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| BS EN 13411-5 : 2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| ISO 15482:1999 | Cross recessed countersunk head drilling screws with tapping screw thread |
| BS EN ISO 15483:1999 | Cross recessed raised countersunk head drilling screws with tapping screw thread |
| BS EN 1663:1998 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) |
| BS EN 14219:2003 | Hexagon bolts with flange with metric fine pitch thread. Small series |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head — St/St |
| BS EN ISO 15481:1999 | Cross recessed pan head drilling screws with tapping screw thread |
| ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head — St/St |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| BS EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| UNE-EN 14422:2014 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| BS EN 14424:2013 | Hose fittings with screwed ferrules |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protruding head — St/St |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| BS EN 14420-6:2013 | Hose fittings with clamp units TW tank truck couplings |
| I.S. EN ISO 15480:1999 | HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| UNE-EN 14424:2014 | Hose fittings with screwed ferrules |
| DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 7089 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A |
| EN 1664:1997 | Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified) |
| EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| EN ISO 15480 : 1999 | HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| EN ISO 7093-2 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| EN ISO 15482 : 1999 | CROSS RECESSED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| EN ISO 7091 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| EN ISO 15483 : 1999 | CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
| EN ISO 15976 : 2002 | CLOSED END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - ST/ST |
| EN 1662:1997/AC:2007 | HEXAGON BOLTS WITH FLANGE - SMALL SERIES (ISO/DIS 15071:1996, MODIFIED) |
| EN ISO 15481 : 1999 | CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15481:1999) |
| EN 1663:1997 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified) |
| EN ISO 15979 : 2002 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD ST/ST |
| EN ISO 10666 : 1999 | DRILLING SCREWS WITH TAPPING SCREW THREAD - MECHANICAL AND FUNCTIONAL PROPERTIES |
| EN ISO 7094:2000/AC:2002 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| EN 1661:1997 | Hexagon nuts with flange (ISO/DIS 4161:1996, modified) |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN ISO 10669 : 1999 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
| EN ISO 7090 : 2000 | PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000) |
| EN ISO 7092 : 2000 | PLAIN WASHERS - SMALL SERIES - PRODUCT GRADE A |
| EN ISO 7093-1 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000) |
| EN 14218:2003 | Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) |
| EN 14424:2013 | Hose fittings with screwed ferrules |
| EN 1665:1997/AC:2007 | HEXAGON BOLTS WITH FLANGE - HEAVY SERIES |
| EN 1667:1997 | Prevailing torque type all-metal hexagon nuts with flange metric fine pitch thread (ISO 12126:1997, modified) |
| EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| EN 14219:2003/AC:2007 | HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES (ISO 15072:1999, modified) |
| EN 14420-6:2013 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN 440:2001-03 | WASHERS - WITH SQUARE HOLE, ESPECIALLY FOR TIMBER CONSTRUCTIONS |
| PREN 14422 : DRAFT 2010 | CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
| 10/30234604 DC : 0 | BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| DIN EN 14219:2003-09 | HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 13001-3-1:2013-12 | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| I.S. EN 50216-12:2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| ISO 10669:1999 | Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A |
| BS EN ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head. St/St |
| BS EN 1667:1998 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread |
| ISO 10666:1999 | Drilling screws with tapping screw thread — Mechanical and functional properties |
| BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
| BS EN 1666:1998 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread |
| DIN EN 14218:2003-09 | HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| DIN EN ISO 2342:2004-05 | Slotted headless screws with shank (ISO 2342:2003) |
| DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| ISO 8991:1986 | Designation system for fasteners |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| EN ISO 2064 : 2000 | METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS |
| ISO 1502:1996 | ISO general-purpose metric screw threads Gauges and gauging |
| ISO 15330:1999 | Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
| ISO 1458:2002 | Metallic coatings Electrodeposited coatings of nickel |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| ISO 3269:2000 | Fasteners Acceptance inspection |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.