• There are no items in your cart

EN ISO 8031:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009)
Superseded date

07-23-2020

Published date

10-15-2009

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Measurement of resistance of conductive, antistatic and
  non-conductive hoses
5 Measurement of electrical continuity between metal end
  fittings of hose assemblies
6 Measurement of electrical discontinuity of hose assemblies
7 Measurement of electrical resistance of a hose assembly
  lining (conductive or static dissipating) or hose assembly
  cover (conductive or static dissipating) in contact with
  the metal end fitting
8 Test report
Annex A (informative) - Recommended terminology and limits
                        for electrical conductivity and
                        resistance

ISO 8031:2009 specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance of conductive, antistatic and non-conductive hoses and the electrical continuity or discontinuity between metal end fittings.

Committee
CEN/TC 218
DevelopmentNote
Supersedes EN 28031. (06/2007)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

BS EN 60079-32-2:2015 Explosive atmospheres Electrostatics hazards. Tests
10/30219414 DC : 0 BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
I.S. EN 13765:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
01/122577 DC : DRAFT JUNE 2001 BS EN 1765 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
DIN EN 16820 E : 2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
PREN 13483 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
ONORM EN 14594 : 2005 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING
DIN EN 13483:2013-09 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
EN 13617-4:2012 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
UNE-EN 13617-2:2012 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
UNE-EN 13617-4:2012 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
BS EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen. Specification
BS EN 1765:2004 Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
DIN EN 1361:1997-08 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
EN 12419 : 1999 RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING, MARKING
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
I.S. EN 13766:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
UNE-EN 16643:2017 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
12/30256960 DC : 0 BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
DD CEN/TS 14421:2006 Hose tail and ferrule for crimping and swaging
01/122581 DC : DRAFT JUNE 2001 BS PREN 1361 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
02/565105 DC : DRAFT DEC 2002 BS EN 14593-1 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
I.S. EN 16820:2017 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
16/30330752 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
DIN EN 1762:2016-09 (Draft) RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
18/30363978 DC : 0 BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
BS EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
NF EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 13617-4:2012-05 Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
DIN EN 13482:2013-12 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
UNE-EN 1765:2017 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 13483:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
I.S. EN 13617-4:2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
DIN EN 1361:2004-10 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
DIN EN 14593-2:2005-07 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING
I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
I.S. EN 12115:2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
I.S. EN 13617-2:2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
I.S. EN 1360:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
I.S. EN 13482:2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
I.S. EN 1765:2016 RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
I.S. EN 14593-2:2005 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING
DIN EN 16820:2015-03 (Draft) RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING
NF EN 13766 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
DIN EN 14594:2005-07 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING
08/30187544 DC : DRAFT OCT 2008 BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
DIN EN 1360:2013-09 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
I.S. EN 16643:2016 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION
EN 13765:2010+A1:2015 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
I.S. EN 14594:2005 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING
DIN EN 13617-2:2012-05 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
DIN EN 12115:2011-04 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011
BS EN 13617-4:2012 Petrol filling stations Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
UNE-EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
UNI EN 13482 : 2013 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
UNI EN 1360 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
UNI EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
I.S. EN 1361:2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
08/30188437 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
11/30250273 DC : 0 BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
10/30219408 DC : 0 BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
UNE-EN 13765:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
ONORM EN 14593-1 : 2005 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
13/30284248 DC : 0 BS EN 16643 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED FLUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR LIQUID AND GASEOUS CHEMICALS - SPECIFICATION
02/565107 DC : DRAFT DEC 2002 BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING
03/300797 DC : DRAFT JAN 2003 EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION
UNE-EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
PREN 13617-2 : DRAFT 2010 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
PREN 13482 : DRAFT 2012 RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION
EN 14594:2018 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking
DIN EN 13765:2015-05 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
PREN 1762 : DRAFT 2018 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
I.S. CEN TS 14421:2006 HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING
EN 13617-2:2012 Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
I.S. EN 1762:2017 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
BS EN 14593-1:2005 Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking
BS EN 13765 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION
UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN 1361:2004 Rubber hoses and hose assemblies for aviation fuel handling. Specification
BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNE-EN 13482:2014 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
BS EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
BS EN 14593-2:2005 Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a half mask at positive pressure. Requirements, testing, marking
UNI EN 13617-4 : 2012 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
UNI EN 13617-2 : 2012 PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS
EI MODEL CODE SAFE PRACTICE PT1 : 2010 THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS
EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery - Specification
EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
EN 16643:2016 Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification
EN 1361 : 2004 RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION
EN 1765:2016 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
EN 14593-2:2005 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking
15/30315105 DC : 0 BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER
PREN 13617-4 : DRAFT 2010 PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS
03/300798 DC : DRAFT JAN 2003 EN 13483 - HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEM - SPECIFICATION
I.S. EN 12419:1999 RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING MARKING
02/565106 DC : DRAFT DEC 2002 BS EN 14593-2 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING
PREN 1360 : DRAFT 2011 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
11/30250270 DC : 0 BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
PREN 13766 : DRAFT 2016 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
S.R. CLC/TR 60079-32-1:2015 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
BS EN 14594:2005 Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking
DIN EN 13766:2010-11 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
EN 13766:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
I.S. EN 14593-1:2005 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING DEVICES WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING
DIN EN 14593-1:2005-07 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
UNE-EN 16820:2018 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining
EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
UNE-EN 13766:2011 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
EN 14593-1:2018 Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking
BS EN 13766:2010 Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
DIN EN 14594 E : 2005 RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING
UNE-EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
BS EN 13617-2:2012 Petrol filling stations Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
BS EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery. Specification
CEN/TS 14421 : 2006 HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING
UNI EN 12115 : 2011 RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION
DIN EN 1762:2004-07 RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION
EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen - Specification
EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
ISO 8330:2007 Rubber and plastics hoses and hose assemblies Vocabulary
ISO 2878:2017 Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.