EN ISO 8041:2005/AC:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
06-18-2021
01-12-2013
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Reference environmental conditions
5 Performance specifications
5.1 General characteristics
5.2 Display of signal magnitude
5.3 Electrical output
5.4 Vibration sensitivity
5.5 Accuracy of indication at reference frequency
under reference conditions
5.6 Frequency weightings and frequency responses
5.7 Amplitude linearity
5.8 Instrument noise
5.9 Signal-burst response
5.10 Overload indication
5.11 Under-range indication
5.12 Time averaging
5.13 Running r.m.s. acceleration
5.14 Reset
5.15 Timing facilities
5.16 Electrical cross-talk
5.17 Vibration transducer characteristics
5.18 Power supply
6 Mounting
7 Environmental and electromagnetic criteria
7.1 General
7.2 Air temperature
7.3 Surface temperature
7.4 Electrostatic discharge
7.5 Radio-frequency emissions and public-power-supply
disturbances
7.6 Immunity to a.c. power-frequency fields and
radio-frequency fields
7.7 Ingress of water and dust
8 Provision for use with auxiliary devices
9 Instrument marking
10 Instrument documentation
11 Testing and calibration
12 Pattern evaluation
12.1 Introduction
12.2 Testing requirements
12.3 Submission for testing
12.4 Marking of the vibration meter and information in
the instrument documentation
12.5 Mandatory facilities and general requirements
12.6 Initial instrument preparation
12.7 Indication at the reference frequency under
reference conditions
12.8 Electrical cross-talk
12.9 Vibration transducer
12.10 Amplitude linearity and under-range indication
12.11 Frequency weightings and frequency responses
12.12 Instrument noise
12.13 Signal-burst response
12.14 Overload indication
12.15 Reset
12.16 Combined axis outputs
12.17 A.c. electrical output
12.18 Timing facilities
12.19 Power supply
12.20 Environmental, electrostatic and radio-frequency
tests
12.21 Test report
13 Verification tests
13.1 Introduction
13.2 Testing requirements
13.3 Submission for a test
13.4 Marking of the vibration meter and information
in the instrument documentation
13.5 Mandatory facilities and general requirements
13.6 Initial instrument preparation
13.7 Indication at the reference frequency under reference
conditions
13.8 Electrical cross-talk
13.9 Amplitude linearity and under-range indication
13.10 Frequency weightings and frequency responses
13.11 Instrument noise
13.12 Signal-burst response
13.13 Overload indication
13.14 Reset
13.15 Combined axis outputs
13.16 Test report
14 In-situ checks
14.1 Introduction
14.2 Preliminary inspection
14.3 Vibration sensitivity (field calibration)
Annex A (normative) - Specification for vibration field
calibrator
Annex B (informative) - Frequency weightings
Annex C (informative) - Realization of frequency weighting
filters
Annex D (informative) - Running r.m.s. time averaging
Annex E (informative) - Vibration transducer characteristics
Annex F (informative) - Tests for mounting systems
Annex G (normative) - Instrument documentation
Annex H (normative) - Phase-response requirements for
measurement of non-r.m.s. quantities
Bibliography
Describes the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration.
Committee |
TC 231
|
DevelopmentNote |
Supersedes ENV 28041 (06/2005)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NF EN ISO 8041 : 2005 | Identical |
UNI EN ISO 8041 : 2005 | Identical |
I.S. EN ISO 8041:2005 | Identical |
NEN EN ISO 8041 : 2005 C1 2007 | Identical |
BS EN ISO 8041:2005 | Identical |
UNE-EN ISO 8041:2006 | Identical |
NBN EN ISO 8041 : 2005 COR 2008 | Identical |
PN EN ISO 8041 : 2008 AC 2008 | Identical |
SN EN ISO 8041 : 2005 CORR 2008 | Identical |
NS EN ISO 8041 : 2005 AC 2008 | Identical |
ISO 8041:2005 | Identical |
DIN EN ISO 8041:2006-06 | Identical |
S.R. CEN/TR 1030-2:2016 | HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE |
BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
I.S. EN 15997:2011 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
PD CEN/TR 1030-2:2016 | Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace |
BS EN 15997:2011 | All terrain vehicles (ATVs - Quads). Safety requirements and test methods |
I.S. EN 16230-1:2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
08/30182206 DC : DRAFT SEP 2008 | BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY |
08/30182212 DC : DRAFT SEP 2008 | BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY |
BS EN 16230-1 : 2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNE-EN 15997:2013 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
DIN EN 14253 E : 2008 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
BS EN 1032 : 2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
CEN/TR 1030-2:2016 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace |
EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
EN 15997:2011/AC:2012 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
EN 13490:2001+A1:2008 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 12299:2009 | Railway applications. Ride comfort for passengers. Measurement and evaluation |
DIN EN 15997:2012-10 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
DIN EN 13490:2009-03 | MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION |
BS EN 13490 : 2002 | |
I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
I.S. EN 14253:2003 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
I.S. EN 13490:2002 | |
I.S. EN 1032:2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
VDI 2057 Blatt 2:2016-03 | Human exposure to mechanical vibrations - Hand-arm vibration |
VDI 2057 Blatt 3:2017-03 | Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings |
VDI 2057-1 : 2017 COR 1 2017 | HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
VDI 4087:2016-12 | Planning, construction and managing of scrap wood yards |
BS EN 61029-1 : 2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
NF EN 61029-1 : 2009 AMD 11 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
NF EN 12299 : 2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
I.S. EN 12299:2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
DIN EN 1032:2009-02 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
UNI EN 13490 : 2009 | MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION |
EN 14253:2003+A1:2007 | Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
UNI EN 14253 : 2008 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
UNI EN 1032 : 2009 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
DIN EN 12299:2009-08 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
07/30171078 DC : DRAFT AUG 2007 | BS EN 61029-1 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
UNI EN 12299 : 2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
16/30337122 DC : 0 | BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 14253 : 2003 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
EN 16230-1:2013+A1:2014 | Leisure karts - Part 1: Safety requirements and test methods for karts |
08/30182209 DC : DRAFT SEP 2008 | BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
09/30206741 DC : 0 | BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS |
DIN EN 16230-1:2015-04 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
I.S. EN 61029-1:2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
DIN EN 14253:2008-02 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
EN 12299:2009 | Railway applications - Ride comfort for passengers - Measurement and evaluation |
EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
ISO 2631-4:2001 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
DIN 45662:1996-12 | VIBRATION MEASURING INSTRUMENTATION - FUNDAMENTAL REQUIREMENTS AND VERIFICATION |
ISO 1683:2015 | Acoustics Preferred reference values for acoustical and vibratory levels |
ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.