ETS 300 741 : 20001

Foreword
1 Scope
2 Normative references
3 Definitions and abbreviations
  3.1 Definitions
  3.2 Abbreviations
4 Test conditions
  4.1 General
  4.2 Normal test modulation
  4.3 Arrangements for test signals at the input of the
      base transmitter
  4.4 Arrangements for test signals at the output of the
      base transmitter
  4.5 Arrangements for test signals at the input of the
      pocket receiver
  4.6 Arrangements for test signals at the output of the
      pocket receiver
  4.7 Exclusion bands
  4.8 Narrow band responses on receivers
5 Performance assessment
  5.1 General
  5.2 Standard paging equipment
  5.3 Special equipment and stand alone tested
      ancillary equipment
  5.4 Equipment classification
  5.5 Conformance of ancillary equipment
6 Performance criteria
  6.1 Performance criteria for Continuous phenomena
      applied to Transmitters (CT)
  6.2 Performance criteria for Transient phenomena
      applied to Transmitters (TT)
  6.3 Performance criteria for Continuous phenomena
      applied to Receivers (CR)
  6.4 Performance criteria for Transient phenomena
      applied to Receivers (TR)
7 Applicability overview table
  7.1 Emission
  7.2 Immunity
8 Test methods and limits for emission tests
  8.1 Test configuration
  8.2 Enclosure
  8.3 DC power input/output ports
  8.4 AC mains power input/output ports
9 Test methods and levels for immunity tests
  9.1 Test configuration
  9.2 Radio frequency electromagnetic field
      (80 MHz - 1000 MHz)
  9.3 Electrostatic discharge
  9.4 Fast transients common mode
  9.5 Radio frequency common mode
      (current clamp injection)
  9.6 Transients and surges in the vehicular
      environment
  9.7 Voltage dips and interruptions
  9.8 Surges, common and differential mode
 Annex A (normative): Antenna port phenomena which
         are relevant for the council Directives
     A.1 Scope
     A.2 Spurious radiations of transmitters
     A.3 Spurious radiations of paging receivers
     A.4 Spurious response immunity
     A.5 Blocking immunity
     A.6 Determination of reference level
     A.7 Description of test fixture
     A.8 Calculations of spurious responses frequencies
Annex B (normative): Radiated measurements
     B.1 Test sites and general arrangements for
         measurements involving the use of radiated
         fields
     B.2 Guidance on the use of radiation test sites
     B.3 Further optional alternative indoor test site
         using an anechoic chamber
Annex C (normative): Subclauses of this ETS relevant
         for compliance with the essential requirements
         of relevant EC Council Directives
History