GR 2853 CORE : ISSUE 3

Preface
1 Introduction
    1.1 Purpose and Scope of Document
    1.2 Organization
    1.3 Changes from GR-2853-CORE, Issue 2
    1.4 Requirements Terminology
    1.5 1.5.1 Numbering of Requirement and Related
                  Objects
          1.5.2 Requirement, Conditional Requirement and
                  Objective Object Identification
2 General Information
    2.1 General Product Description
          2.1.1 AM/Digital Video Laser Transmitter
          2.1.2 Erbium-Doped Optical Fiber Amplifiers
          2.1.3 Optical AM/Digital Video Receivers
    2.2 Types of Transmitters and Receivers Considered
    2.3 Applications
          2.3.1 Video Signal Format and RF Channel
                  Allocation Spectrum
          2.3.2 QAM Cable Modems
          2.3.3 Hybrid Fiber/Coax (HFC) Architecture
          2.3.4 AM/QAM Video Fiber-Optic Supertrunking
                  Architecture
          2.3.5 Fiber in the Loop Systems
          2.3.6 Environmental Conditions
          2.3.7 Externally-modulated Fiber-Optic Video
                  Transmitters
3 General and Design Criteria
    3.1 Physical Design Criteria
          3.1.1 Optical Fiber
          3.1.2 Optical Connectors
          3.1.3 Network Equipment-Building System (NEBS)
          3.1.4 Materials
          3.1.5 Laser Protection and Safety
          3.1.6 Mounting
    3.2 Operation
    3.3 Maintenance
    3.4 Product Information
          3.4.1 Documentation
          3.4.2 Performance Specification Sheet
    3.5 Product and Packaging Markings
          3.5.1 Product Markings
          3.5.2 Packaging Markings
4 Performance Criteria
    4.1 Optical Transmitters
          4.1.1 Center Wavelength
          4.1.2 Laser Spectral Linewidth
          4.1.3 Side-Mode Suppression Ratio
          4.1.4 Optical Output Power
          4.1.5 RF Electrical Input Power
    4.2 Optical Receivers
          4.2.1 Operating Wavelength Range
          4.2.2 Optical Input Power
          4.2.3 RF Electrical Output Power
          4.2.4 RF Upstream Electrical Input Power
          4.2.5 RF Electrical Output Tilt
    4.3 AM/Digital Video Transport System Carrier
          4.3.1 AM-VSB Carrier-to-Noise-Ratio
          4.3.2 QAM Signal-to Noise-Ratio
          4.3.3 QAM Spurious Interference
          4.3.4 QAM Amplitude Variation
          4.3.5 16-VSB Signal-to-Noise-Ratio
          4.3.6 QPSK Signal-to-Noise Ratio
          4.3.7 Electrical Bandwidth
          4.3.8 Electrical Frequency Response Flatness
          4.3.9 CSO and CTB Distortions
          4.3.10 Electrical Return Loss
          4.3.11 Isolation (Optical Reflection Tolerance)
          4.3.12 Reflectance
    4.4 EDFA-Based AM/Digital Video-Transport System
          Criteria
          4.4.1 Maximum/Minimum EDFA Optical Input Power
          4.4.2 Maximum/Minimum EDFA Optical Output Power
          4.4.3 Saturated Noise Figure (SNF)
          4.4.4 Gain Bandwidth
          4.4.5 EDFA Gain Flatness
          4.4.6 Optical Return Loss (Reflectance)
          4.4.7 Polarization Sensitivity
    4.5 Environmental Criteria
          4.5.1 Long-Term Operating Environment
          4.5.2 Short-Term Non-Operating Environment
          4.5.3 Shock Criteria
          4.5.4 Vibration Test
          4.5.5 Airborne Contaminants
    4.6 Power Criteria
          4.6.1 Electrical Supply Power
    4.7 Electromagnetic Interference and Electrostatic
          Discharge
          4.7.1 Electromagnetic Discharge
          4.7.2 Electrostatic Discharge
5 Performance Verification/Test Procedure
    5.1 Optical Laser Transmitters
          5.1.1 Center Wavelength
          5.1.2 Spectral Width
          5.1.3 Side-mode Suppression Ratio
          5.1.4 Optical Output Power
          5.1.5 RF Electrical Input Power
    5.2 Optical Receivers
          5.2.1 Operating Wavelength Range
          5.2.2 Optical Input Power
          5.2.3 RF Electrical Output Power
          5.2.4 RF Upstream Electrical Input Power
          5.2.5 RF Electrical Output Tilt
    5.3 AM/Digital Video Transport System Tests
          5.3.1 AM-VSB Carrier-to-Noise Ratio (CNR)
          5.3.2 QAM Signal-to-Noise Ratio
          5.3.3 QAM Spurious Interference
          5.3.4 QAM Amplitude Variation
          5.3.5 16-VSB Signal-to-Noise Ratio
          5.3.6 QPSK Signal-to-Noise Ratio
          5.3.7 Electrical Bandwidth
          5.3.8 Electrical Frequency Response Flatness
          5.3.9 CSO and CTB Distortions
          5.3.10 Electrical Return Loss
          5.3.11 Isolation (Reflection Tolerance)
          5.3.12 Reflectance
    5.4 EDFA-Based AM/Digital Video Transport System Tests
          5.4.1 Maximum/Minimum EDFA Optical Output Power
          5.4.2 Maximum/Minimum EDFA Optical Input Power
          5.4.3 Saturated Noise Figure
          5.4.4 Gain Bandwidth
          5.4.5 EDFA Gain Flatness
          5.4.6 Optical Return Loss
          5.4.7 Polarization Sensitivity
    5.5 Environmental Performance Testing
          5.5.1 Operating Environment
          5.5.2 Non-operating Environment
          5.5.3 Shock Tests
          5.5.4 Vibration Test
          5.5.5 Airborne Contaminants Test
    5.6 Power Criteria
          5.6.1 Electrical Supply Power
    5.7 Electromagnetic Interference and Electrostatic
          Discharge
          5.7.1 Electromagnetic Interference
          5.7.2 Electrostatic Discharge
6 Reliability and Quality Assurance Program
    6.1 System Reliability and Service Availability
          Criteria
          6.1.1 Reliability Objectives
          6.1.2 Maintenance Objectives
          6.1.3 Infant Mortality
          6.1.4 Failure Rate Predictions
    6.2 Manufacturer Testing
          6.2.1 System Qualification
          6.2.2 System Requalification
          6.2.3 Manufacturing Tests
    6.3 Manufacturing and Assembly Reliability
          6.3.1 Physical Design
          6.3.2 Incoming Lot Controls
          6.3.3 Manufacturing and Assembly Practices
          6.3.4 Corrective Action Program
    6.4 Component Reliability Assurance
          6.4.1 Optoelectronics
          6.4.2 Fiber Optic Branching Devices
          6.4.3 Fiber Optic Connectors
          6.4.4 Optical Adhesives
          6.4.5 General Components
7 Surveillance Functionality
    7.1 Alarm Surveillance
          7.1.1 Trouble Reporting
          7.1.2 Trouble Reporting Controls
          7.1.3 Alarm Controls
          7.1.4 Threshold Control
          7.1.5 Status Retrieval
    7.2 Performance Monitoring (PM)
    7.3 Failure Identification Functions
    7.4 Recovery and Control Functions
          7.4.1 Maintenance State Control
          7.4.2 External Device Control
          7.4.3 Initialization
          7.4.4 Switching
Appendix A: Summary of Applicable TL1 Messages
References
Glossary