HB 158-2010
|
Delivering assurance based on ISO 31000:2009 Risk management - Principles and guidelines |
AS 1604.1-2010
|
Specification for preservative treatment Sawn and round timber |
AS 3818.11-2009
|
Timber - Heavy structural products - Visually graded Utility poles |
AS/NZS 4065:2010
|
Concrete utility services poles |
AS 3766-1990
|
Mechanical fittings for low voltage aerial bundled cables |
AS 3822-2002
|
Test methods for bare overhead conductors |
AS 3891.1-2008
|
Air navigation - Cables and their supporting structures - Marking and safety requirements Permanent marking of overhead cables and their supporting structures for other than planned low-level flying |
AS/NZS 1170.2:2002
|
Structural design actions Wind actions |
HB 103-1997 (CJC 7)
|
Coordination of power and telecommunications - Crossings code - The arrangement of overhead power and telecommunications lines, pole stay wires, and suspension wires |
AS/NZS 1891.1:2007
|
Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
HB 219:2006
|
Earth potential rise - Protection of telecommunications network users, personnel and plant - Worked examples for the application guide (Reconfirmed 2020) |
AS/NZS 4680:2006
|
Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS/NZS 3560.1:2000
|
Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021) |
AS 60305-2007
|
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type |
AS 1222.1-1992
|
Steel conductors and stays - Bare overhead Galvanized (SC/GZ) (Reconfirmed 2016) |
AS/NZS 2878:2000
|
Timber - Classification into strength groups |
AS 1531-1991
|
Conductors - Bare overhead - Aluminium and aluminium alloy (Reconfirmed 2016) |
AS/NZS 3675:2002
|
Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV (Reconfirmed 2017) |
AS 1720.2-2006
|
Timber structures Timber properties |
AS 3818.4-2010
|
Timber - Heavy structural products - Visually graded Cross-arms for overhead lines |
HB 102-1997 (CJC 6)
|
Coordination of power and telecommunications - Low Frequency Induction (LFI) - Application Guide to the LFI Code |
AS 1824.2-1985
|
Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide |
AS 1746-1991
|
Conductors - Bare overhead - Hard-drawn copper |
HB 101-1997 (CJC 5)
|
Coordination of power and telecommunications - Low Frequency Induction (LFI) - Code of practice for the mitigation of hazardous voltages induced into telecommunications lines |
AS/NZS 3599.1:2003
|
Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11 (12) kV and 12.7/22 (24) kV Metallic screened (Reconfirmed 2021) |
AS 3818.1-2009
|
Timber - Heavy structural products - Visually graded General requirements |
AS/NZS 7000:2010
|
Overhead line design - Detailed procedures |
AS/NZS 3835.2:2006
|
Earth potential rise - Protection of telecommunications network users, personnel and plant Application guide |
AS/NZS 3845:1999
|
Road safety barrier systems |
AS 4398.1-1996
|
Insulators - Ceramic or glass - Station post for indoor and outdoor use - Voltages greater than 1000 V a.c. Characteristics (Reconfirmed 2016) |
AS/NZS 1158.1.2:2010
|
Lighting for roads and public spaces Vehicular traffic (Category V) lighting - Guide to design, installation, operation and maintenance |
AS/NZS 4435.2:1999
|
Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Standard strength classes and end fittings for string insulator units (Reconfirmed 2016) |
AS/NZS 1170.2:2011
|
Structural design actions Wind actions (Reconfirmed 2016) |
AS/NZS ISO 31000:2009
|
Risk management - Principles and guidelines |
AS 1154.3-2009
|
Insulator and conductor fittings for overhead power lines Performance and general requirements for helical fittings (Reconfirmed 2019) |
AS 1720.1-2010
|
Timber structures Design methods |
HB 100-2000 (CJC 4)
|
COORDINATION OF POWER AND TELECOMMUNICATIONS - Manual for the establishment of safe work practices and the minimization of operational interference between power systems and paired cable telecommunications systems |
AS/NZS 2947.4:1999
|
Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator strings and insulator sets |
AS/NZS 4676:2000
|
Structural design requirements for utility services poles |
AS 4436-1996
|
Guide for the selection of insulators in respect of polluted conditions |
AS 4435.1-1996
|
Insulators - Composite for overhead lines - Voltages greater than 1000 V a.c. Definitions, test methods and acceptance criteria for string insulator units |
AS 4799-2000
|
Installation of underground utility services and pipelines within railway boundaries |
HB 108-1998
|
Timber Design Handbook - In accordance with the Australian Limit State Timber Design Code, AS 1720.1-1997 |
AS/NZS 1891.2:2001
|
Industrial fall-arrest systems and devices Horizontal lifeline and rail systems |
SAA HB 88-1997 (CJC 2)
|
Unbalanced high voltage power lines - Code of practice for the mitigation of noise induced into paired cable telecommunications lines from unbalanced high voltage power lines |
AS 1154.1-2009
|
Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
AS 5604-2005
|
Timber - Natural durability ratings (Reconfirmed 2016) |
AS/NZS 3599.2:1999
|
Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Non-metallic screened |
AS 4398.2-2005
|
Insulators - Ceramic or glass - Station post for indoor or outdoor use - Voltages greater than 1000 V a.c. Tests (IEC 60168, Ed. 4.2 (2001) MOD) |
HB 87-1997 (CJC 1)
|
Joint use of poles, The placement on poles of power lines and paired cable telecommunications lines |
AS/NZS 1559:1997
|
Hot-dip galvanized steel bolts and associated nuts and washers for tower construction |
AS 3818.10-2010
|
Timber - Heavy structural products - Visually graded Building poles |
AS 1289.6.3.1-2004
|
Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT) |
AS/NZS 2344:1997
|
Limits of electromagnetic interference from overhead a.c. powerlines and high voltage equipment installations in the frequency range 0.15 to 1000 MHz |
AS 3891.2-2008
|
Air navigation - Cables and their supporting structures - Marking and safety requirements Marking of overhead cables for planned low-level flying operations |
AS 2067-2008
|
Substations and high voltage installations exceeding 1 kV a.c. |
AS/NZS 2947.1:1999
|
Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator units |
AS 2209-1994
|
Timber - Poles for overhead lines |
AS 1222.2-1992
|
Steel conductors and stays - Bare overhead Aluminium clad (SC/AC) (Reconfirmed 2016) |
AS 6947-2009
|
Crossing of waterways by electricity infrastructure (Reconfirmed 2019) |
AS/NZS 1891.3:1997
|
Industrial fall-arrest systems and devices - Fall-arrest devices |
AS 4435.4-2005
|
Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Definitions, test methods, acceptance criteria for post insulator units (Reconfirmed 2016) |
AS/NZS 3835.1:2006
|
Earth potential rise - Protection of telecommunications network users, personnel and plant Code of practice |
AS/NZS 1891.4:2009
|
Industrial fall-arrest systems and devices Selection, use and maintenance |