I.S. 196-6:1986

Foreword
Declaration
1 SCOPE
2 DEFINITIONS
   2.1 Component
   2.2 Deviation
   2.3 Doorset
   2.4 External door
   2.5 Framed, ledged, braced and sheeted door
   2.6 Framed, ledged and sheeted door
   2.7 Door leaf
   2.8 Glazed, framed, ledged and sheeted door
   2.9 Size
   2.10 Work size
3 DIMENSIONAL AND ANCILLARY REQUIREMENTS
   3.1 Sizes
   3.2 Glazing openings
   3.3 Sizing and coding conventions
   3.4 Squareness
   3.5 Flatness
4 MOISTURE CONTENT
5 GENERAL FITNESS FOR USE
6 MATERIALS
   6.1 Panel materials
   6.2 Timber
   6.3 Adhesive
   6.4 Knotting
   6.5 Priming paint
7 TREATMENT WITH PRESERVATIVE AND WATER REPELLANTS
8 COMPONENTS
   8.1 General
   8.2 Thickness
   8.3 Doors with glazing openings
   8.4 Sawn sizes
   8.5 Thickness
   8.6 Alternatives to diagonal bracing
   8.7 Doors with flush internal face
9 CONSTRUCTION
   9.1 Description
   9.2 Framing
   9.3 Sheeting
   9.4 Doors with glazing openings
   9.5 Fabrication
10 SURFACE FINISHING REQUIREMENTS
   10.1 General
   10.2 Clear finishes
   10.3 Painted finishes
   10.4 Pre-finished doors
   10.5 Protection of finished doors
11 VERIFICATION OF COMPLIANCE
12 MARKING AND ORDERING
   12.1 Marking
   12.2 Ordering
Appendices
A HANDLING OF DOORS
  A.1 Introduction
  A.2 Transport
  A.3 Storage on site
  A.4 Fitting
  A.5 Occupation
  A.6 Instructions
B SOME SPECIES OF SOFTWOOD SUITABLE FOR USE IN EXTERNAL DOORS
C SOME SPECIES OF HARDWOOD SUITABLE FOR USE IN EXTERNAL DOORS
D REFERENCE STANDARDS
Notes to Users