• There are no items in your cart

I.S. 813:2014+A1:2017

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

DOMESTIC GAS INSTALLATIONS (EDITION 3) AND AMENDMENT 1:2017
Available format(s)

Hardcopy , PDF

Withdrawn date

09-29-2020

Published date

03-07-2017

Preview

DECLARATION
Foreword
Schedule
1 Scope
2 Normative references
3 Terms and definitions
4 Installation pipework
5 Requirements for connection of appliances
6 Permitted locations of appliances
7 Specific requirements relating to individual appliances
8 Requirements for water pipework
9 Electrical considerations
10 Flues
11 Provision of air
12 Testing pipework
13 Admission of gas
14 Commissioning
15 Declaration of conformance
16 Safety in use
Annex A (informative) - Gas characteristics Characteristics
        Odourisation
Annex B (normative) - Gas supply systems
Annex C (normative) - Servicing a domestic gas appliance
Annex D (informative) - Meter Installations
Annex E (normative) - Safety of existing installations
Annex F (informative) - Examples of gas fires
Annex G (informative) - Example of pipework configurations
Annex H (normative) - Pipework for flammable gases or liquids in
        service shafts (in multioccupancy or multi-storey buildings)
Annex I (normative) - Carbon monoxide detectors
Annex J (normative) - Requirements for educational establishments
Annex K (informative) - Electrical considerations
Annex L (informative) - Pipe sizing tables
Annex M (informative) - Safety of heating and hot water systems
Annex N (normative) - Jointing procedures for the construction of
        pressed joints
Annex O (informative) - Guidelines for the construction of
        corrugated stainless steel tubing (CSST) pipework systems
Annex P (informative) - Assessing air permeability
Annex Q (informative) - Recommendations for minimum safety
        requirements for the conversion of existing domestic oil-fired
        central heating boilers to gas-fired
Bibliography

This Standard provides a Code of Practice for the installation of natural gas or liquefied petroleum gas, in permanent domestic dwellings, from the point of delivery to the gas appliance.

Committee
TC 2
DocumentType
Standard
Pages
131
PublisherName
National Standards Authority of Ireland
Status
Withdrawn
SupersededBy
Supersedes

BS 476-23:1987 Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure
ISO 17484-2:2009 Plastics piping systems Multilayer pipe systems for indoor gas installations Part 2: Code of pratice
ISO 17484-1:2014 Plastics piping systems Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Part 1: Specifications for systems
I.S. EN 50379-3:2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN NON-STATUTORY SERVICING OF GAS FIRED HEATING APPLIANCES
I.S. EN 1859:2009 CHIMNEYS - METAL CHIMNEYS - TEST METHODS
I.S. EN 10226-1:2004 PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 1: TAPER EXTERNAL THREADS AND PARALLEL INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION
I.S. EN ISO 4126-1:2013 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES (ISO 4126-1:2013)
BS 567:1973 Specification for asbestos-cement flue pipes and fittings, light quality
I.S. EN 449:2002 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - DOMESTIC FLUELESS SPACE HEATERS (INCLUDING DIFFUSIVE CATALYTIC COMBUSTION HEATERS)
I.S. EN 13831:2007 CLOSED EXPANSION VESSELS WITH BUILT IN DIAPHRAGM FOR INSTALLATION IN WATER
I.S. EN 1856-1:2009 CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS
I.S. EN 331:2015 MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN 1254-2:1998 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES
I.S. EN 10241:2000 STEEL THREADED PIPE FITTINGS
I.S. EN 751-1:1997 SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 1: ANAEROBIC JOINTING COMPOUNDS
S.R. 12007-5:2016 GUIDANCE ON THE APPLICATION OF I.S. EN 12007-5:2014, GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS
I.S. EN 1555-3:2010 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS
I.S. EN 509:2000 DECORATIVE FUEL-EFFECT GAS APPLIANCES
I.S. EN 15266:2007 STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR
I.S. EN 14291:2004 FOAM PRODUCING SOLUTIONS FOR LEAK DETECTION ON GAS INSTALLATIONS
I.S. EN 1457-1:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 1: FLUE LINERS OPERATING UNDER DRY CONDITIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 14471:2013 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
I.S. EN 14604:2005 SMOKE ALARM DEVICES
EN ISO 21003-2:2008/A1:2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)
I.S. EN 1555-1:2010-2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. 3216:2010 CODE OF PRACTICE - BULK STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) - (EDITION 2)
BS 476-20:1987 Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles)
I.S. EN 751-2:1997 SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 2: NON-HARDENING JOINTING COMPOUNDS
I.S. EN 1555-4:2011 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
I.S. EN 50291-1:2010 GAS DETECTORS - ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 1: TEST METHODS AND PERFORMANCE REQUIREMENTS
I.S. EN 16436-1:2014 RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS
I.S. EN 1555-5:2010 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
I.S. EN 1856-2:2009 CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES
I.S. EN 1057:2006 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS
I.S. EN 1555-2:2010 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES
I.S. 3213:1987 CODE OF PRACTICE FOR THE STORAGE OF LPG CYLINDERS AND CARTRIDGES
I.S. 820:2010 NON-DOMESTIC GAS INSTALLATIONS
I.S. EN 50292:2013 ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES, CARAVANS AND BOATS - GUIDE ON THE SELECTION, INSTALLATION, USE AND MAINTENANCE
I.S. EN 437:2003 TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES
I.S. EN 1858:2008 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
I.S. EN 14800:2007 CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS
I.S. EN 10255:2004 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10312:2003 WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 15287-1:2007 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
I.S. EN 1457-2:2012 CHIMNEYS - CLAY/CERAMIC FLUE LINERS - PART 2: FLUE LINERS OPERATING UNDER WET CONDITIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 751-3:1997 SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 3: UNSINTERED PTFE TAPES
BS 8537:2010 Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes
I.S. EN 1775:2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS

View more information
US$52.62
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.