• There are no items in your cart

I.S. EN 12094-8:2006

Current
Current

The latest, up-to-date edition.

FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2006

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 General design
  4.2 Connection threads
  4.3 Resistance to leakage
  4.4 Resistance to bursting
  4.5 Resistance of type 2 and type 4 connectors to
       pressure and heat
  4.6 Resistance of type 2 and type 4 connectors to
       heat and cold shock
  4.7 Resistance of flexible connectors to cold
  4.8 Resistance of type 2 connectors to flexing
  4.9 Documentation
5 Type test methods
  5.1 Conditions
  5.2 Samples
  5.3 Compliance
  5.4 Test for resistance to leakage
  5.5 Test for resistance to bursting
  5.6 Test for resistance of type 2 and type 4 connectors
       to pressure and heat
  5.7 Test for resistance of type 2 and type 4 connectors
       to heat and cold shock
  5.8 Test for resistance of flexible connectors to cold
  5.9 Test for resistance of type 2 connectors to flexing
6 Marking
7 Evaluation of conformity
  7.1 General
  7.2 Initial type testing
  7.3 Factory production control (FPC)
Annex ZA (informative) Clauses of this European Standard
         addressing the provisions of the Construction
         Products Directive
  ZA.1 Scope and relevant characteristics
  ZA.2 Procedure for the attestation of conformity of
       connectors
  ZA.3 CE Marking and labelling
Bibliography

States requirements and describes test methods for flexible and rigid connectors used in CO[2]-, Inert Gas- or Halocarbon gas fire extinguishing systems.

DocumentType
Standard
Pages
24
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
89/686/EEC : 1989 AMD 5 2012 COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
1990/384/EEC : 1990 COUNCIL DIRECTIVE OF 20 JUNE 1990 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO NON-AUTOMATIC WEIGHING INSTRUMENTS
1988/378/EEC : 1988 COUNCIL DIRECTIVE OF 3 MAY 1988 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING THE SAFETY OF TOYS
EN 45011 : 1998 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
1973/23/EEC : 1973 COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 9001:2015 Quality management systems — Requirements
92/42/EEC : 1992 AMD 5 2013 COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS
ISO/IEC Guide 65:1996 General requirements for bodies operating product certification systems
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
1987/404/EEC : 1987 COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS
1990/396/EEC : 1990 COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS

View more information
US$58.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.