I.S. EN 13757-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
COMMUNICATION SYSTEMS FOR METERS - PART 1: DATA EXCHANGE
Hardcopy , PDF
01-03-2022
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General description and security
5 Network Architecture
6 Application Layers for Metering
7 Data Exchange
8 Upper Layer Protocols
9 Cross-application data handling
10 Extensions to COSEM
11 Object Identification System (OBIS)
Annex A (normative) - Basic class meters
Annex B (informative) - DLMS Glossary
Annex C (informative) - Gas Volume Conversion
Annex D (normative) - Country specific identifiers
Bibliography
Describes data exchange and communications for meters and remote reading of meters in a generic way.
DocumentType |
Standard
|
Pages |
146
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 13757-1:2014 | Identical |
UNI EN 13757-1 : 2003 | Identical |
NBN EN 13757-1 : 2014 | Identical |
SN EN 13757-1 : 2015 | Identical |
BS EN 13757-1:2014 | Identical |
NEN EN 13757-1 : 2014 | Identical |
NF EN 13757-1 : 2014 | Identical |
UNE-EN 13757-1:2015 | Identical |
DIN EN 13757-1:2015-01 | Identical |
NS EN 13757-1 : 2014 | Identical |
ONORM EN 13757-1 : 2014 | Identical |
EN 60870-5-2:1993 | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures |
EN 62056-9-7 : 2013 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 9-7: COMMUNICATION PROFILE FOR TCP-UDP/IP NETWORKS (IEC 62056-9-7:2013) |
EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
EN 61334-4-41:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 41: Application protocols - Distribution line message specification |
ISO 1155:1978 | Information processing Use of longitudinal parity to detect errors in information messages |
ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
ISO/IEC 15954:1999 | Information technology Open Systems Interconnection Connection-mode protocol for the Application Service Object Association Control Service Element |
EN 62056-46:2002/A1:2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 46: DATA LINK LAYER USING HDLC PROTOCOL |
EN 62056-3-1:2014 | Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling |
ISO/IEC 15953:1999 | Information technology Open Systems Interconnection Service definition for the Application Service Object Association Control Service Element |
EN 61334-6:2000 | Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule |
EN 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
ISO 9506-1:2003 | Industrial automation systems Manufacturing Message Specification Part 1: Service definition |
IEC 61334-6:2000 | Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule |
EN 13757-5:2015 | Communication systems for meters - Part 5: Wireless M-Bus relaying |
IEC 62056-5-3:2017 | Electrcity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer |
ISO 1745:1975 | Information processing Basic mode control procedures for data communication systems |
EN 61334-4-1:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 1: Reference model of the communication system |
ISO 7498-2:1989 | Information processing systems Open Systems Interconnection Basic Reference Model Part 2: Security Architecture |
EN 1434-2:2015 | Heat meters - Part 2: Constructional requirements |
IEC 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
EN 13757-4:2013 | Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands) |
IEC 62056-42:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange |
IEC TR 62051-1:2004 | Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM |
ISO/IEC 13239:2002 | Information technology Telecommunications and information exchange between systems High-level data link control (HDLC) procedures |
IEC 62056-47:2006 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks |
EN 62056-5-3:2017 | Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer |
ISO 1177:1985 | Information processing Character structure for start/stop and synchronous character oriented transmission |
EN 62056-7-6:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based communication profile |
IEC 60870-5-2:1992 | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures |
EN 62056-47:2007 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks |
IEC 61334-4-41:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 41: Application protocol - Distribution line message specification |
ISO/IEC 646:1991 | Information technology ISO 7-bit coded character set for information interchange |
IEC 62056-7-6:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based communication profile |
IEC 62056-9-7:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP networks |
EN 834:2013/AC:2015 | HEAT COST ALLOCATORS FOR THE DETERMINATION OF THE CONSUMPTION OF ROOM HEATING RADIATORS - APPLIANCES WITH ELECTRICAL ENERGY SUPPLY |
EN 13757-6:2015 | Communication systems for meters - Part 6: Local Bus |
ISO/IEC 8824-1:2015 | Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation Part 1: |
CEN/CLC/ETSI/TR 50572 : 2011 | FUNCTIONAL REFERENCE ARCHITECTURE FOR COMMUNICATIONS IN SMART METERING SYSTEMS |
IEC 62056-3-1:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling |
IEC 62056-6-1:2017 | Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) |
IEC 62056-46:2002+AMD1:2006 CSV | Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol |
EN 1434-1:2015 | Heat meters - Part 1: General requirements |
ISO/IEC 8802-2:1998 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 2: Logical link control |
EN 62056-42:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange |
EN 1434-3:2015 | Heat meters - Part 3: Data exchange and interfaces |
IEC 61334-4-1:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 1: Reference model of the communication system |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.