|
ISO 9229:2007
|
Thermal insulation Vocabulary
|
|
EN ISO 8894-1:2010
|
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
|
|
EN 12667:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
|
|
ISO 13787:2003
|
Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity
|
|
EN 12085:2013
|
Thermal insulating products for building applications - Determination of linear dimensions of test specimens
|
|
EN 13468:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
|
|
EN 13820:2003
|
Thermal insulating materials for building applications - Determination of organic content
|
|
EN 993-9:1997
|
Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression
|
|
ISO 2477:2005
|
Shaped insulating refractory products Determination of permanent change in dimensions on heating
|
|
EN 13471:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion
|
|
EN 12939:2000
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
|
|
EN ISO 8497:1996
|
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994)
|
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
|
|
EN 993-4:1995
|
Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases
|
|
EN ISO 9229:2007
|
Thermal insulation - Vocabulary (ISO 9229:2007)
|
|
EN 13469:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation
|
|
EN 824:2013
|
Thermal insulating products for building applications - Determination of squareness
|
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
|
EN ISO 1182:2010
|
Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
|
|
EN 825:2013
|
Thermal insulating products for building applications - Determination of flatness
|
|
ISO 9053:1991
|
Acoustics Materials for acoustical applications Determination of airflow resistance
|
|
EN 823:2013
|
Thermal insulating products for building applications - Determination of thickness
|
|
ISO 8497:1994
|
Thermal insulation — Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
|
|
EN ISO 13787:2003
|
Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003)
|
|
EN 13470:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation
|
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
|
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test
|
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
|
EN 1602:2013
|
Thermal insulating products for building applications - Determination of the apparent density
|
|
EN 29053:1993
|
Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991)
|
|
ISO 11654:1997
|
Acoustics — Sound absorbers for use in buildings — Rating of sound absorption
|
|
ISO 8894-1:2010
|
Refractory materials Determination of thermal conductivity Part 1: Hot-wire methods (cross-array and resistance thermometer)
|
|
EN 13472:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation
|
|
EN 1603:2013
|
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)
|
|
EN 1604:2013
|
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
|
|
EN 1094-6:1998
|
Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987 modified)
|
|
EN 13639:2017
|
Determination of total organic carbon in limestone
|
|
EN 12089:2013
|
Thermal insulating products for building applications - Determination of bending behaviour
|
|
ISO 65:1981
|
Carbon steel tubes suitable for screwing in accordance with ISO 7-1
|
|
EN 993-1:1995
|
METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POROSITY
|
|
EN 1609:2013
|
Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
|
|
EN 826:2013
|
Thermal insulating products for building applications - Determination of compression behaviour
|
|
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
|
|
EN ISO 11654:1997
|
Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997)
|
|
EN 15715:2009
|
Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products
|
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
|
|
EN 12086:2013
|
Thermal insulating products for building applications - Determination of water vapour transmission properties
|
|
EN 13172:2012
|
Thermal insulation products - Evaluation of conformity
|
|
EN 822:2013
|
Thermal insulating products for building applications - Determination of length and width
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.