I.S. EN 1442:2017
Current
The latest, up-to-date edition.
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials
5 Design
6 Construction and workmanship
7 Tests and examinations
8 Technical requirements for type approval
9 Initial inspection and tests
10 Marking
11 Documentation
12 Certificate
Annex A (normative) - Standard specific marking
Annex B (normative) - Over-moulded cylinders
Annex C (informative) - Example of over-moulded
cylinder
Bibliography
Defines the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l.
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
SN EN 1442 : 2017 | Identical |
NBN EN 1442 : 2006 + A1 2008 | Identical |
NEN EN 1442 : 2017 | Identical |
DIN EN 1442:2008-04 | Identical |
NS EN 1442 : 2017 | Identical |
EN 1442:2017 | Identical |
BS EN 1442 : 2006 | Identical |
UNI EN 1442 : 2008 | Identical |
NF EN 1442 : 2017 | Identical |
UNE-EN 1442:2017 | Identical |
EN 14784-2:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays |
ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
ISO 14245:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Self-closing |
EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
EN ISO 5173:2010/A1:2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009) |
ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 11117:2008/AC:2010 | GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS - DESIGN, CONSTRUCTION AND TESTS |
ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
CEN/TS 16769:2015 | LPG equipment and accessories - Terminology |
ISO 11363-1:2010 | Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
EN ISO 19232-1:2013 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
EN ISO 19232-2:2013 | Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013) |
ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
EN ISO 17639:2013 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003) |
ISO 15995:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Manually operated |
ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
ISO 17639:2003 | Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
EN 14784-1:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems |
EN 10020:2000 | Definition and classification of grades of steel |
EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
EN 14894:2013 | LPG equipment and accessories - Cylinder and drum marking |
ISO 19232-2:2013 | Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators |
CEN/TS 16765:2015 | LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards |
ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
EN 14717:2005 | Welding and allied processes - Environmental check list |
EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
EN ISO 15995:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006) |
ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
EN ISO 14245:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.