• There are no items in your cart

I.S. EN 15037-1:2008

Current
Current

The latest, up-to-date edition.

PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2008

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 Material requirements
  4.2 Production requirements
  4.3 Finished product requirements
5 Test methods
  5.1 Tests on concrete
  5.2 Measuring of dimensions and surface characteristics
  5.3 Weight of the products
  5.4 Prestressing
6 Evaluation of conformity
  6.1 General
  6.2 Type testing
  6.3 Factory production control
7 Marking
8 Technical documentation
Annex A (normative) - Inspection schemes for beams
      A.1 General
      A.2 Process inspection
      A.3 Finished product inspection
Annex B (informative) - Typology of beam-and-block
                        floor systems
      B.1 General
      B.2 Floor systems with cast in-situ structural topping
      B.3 Floor systems with composite topping
      B.4 Floor systems with partial topping
      B.5 Floors with self-bearing beams
Annex C (informative) - Monolithism of composite floor systems
      C.1 General
      C.2 Strength of connecting reinforcement
      C.3 Anchorage of connecting reinforcement
Annex D (informative) - Detailing of supports and anchorage
                        of reinforcement
      D.1 General
      D.2 Construction of supports
      D.3 Anchorage of reinforcements
Annex E (informative) - Design of composite floor systems
      E.1 General
      E.2 Resisting section of the finished floor system
      E.3 Design value of the ULS mid-span bending moment (M[Rd])
      E.4 Serviceability limit states
      E.5 Verification of the shear strength in composite systems
Annex F (informative) - Design of self-bearing beams
      F.1 General
      F.2 Design value of the ultimate limit state bending moment
      F.3 Serviceability limit state of prestressed beams
      F.4 Design value of the resisting shear force
Annex G (informative) - Diaphragm action
      G.1 General
      G.2 Case of low rise building
Annex H (normative) - Testing to determine erection spans
      H.1 General
      H.2 Determination of erection span
      H.3 Apparatus
      H.4 Test arrangement
      H.5 Loading procedure
      H.6 Interpretation of results
      H.7 Test report
Annex J (informative) - Concrete strength at time of release
                        of tendons
      J.1 General
Annex K (informative) - Resistance to fire
      K.1 General
      K.2 Fire resistance of beam-and-block floor systems
      K.3 Determination by testing
      K.4 Evaluation by calculation
      K.5 Tabulated data
Annex L (informative) - Acoustic insulation
      L.1 General
      L.2 Airborne sound insulation
      L.3 Impact sound insulation
Annex Y (informative) - Choice of CE marking method
      Y.1 General
      Y.2 Method 1
      Y.3 Method 2
      Y.4 Method 3
Annex ZA (informative) - Relationship between this European
                         Standard and the Essential Requirements
                         of EU Directive 89/109/EEC, EU
                         Construction Products Directive
      ZA.1 Scope and relevant characteristics
      ZA.2 Procedure for attestation of conformity of
           beams for beam-and-block floor systems
      ZA.3 CE marking and labelling
Bibliography

Gives the requirements, the basic performance criteria and evaluation of conformity for precast beams made of reinforced or prestressed normal weight concrete.

DocumentType
Standard
Pages
95
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
EN 15037-1:2008 Identical

PREN 15037-5 : DRAFT 2010 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 5: LIGHTWEIGHT BLOCKS FOR SIMPLE FORMWORK
EN 13225:2013 Precast concrete products - Linear structural elements
PREN 15037-4 : DRAFT 2009 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
EN 1991-1-1:2002/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 1365-2:2014 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
EN 12354-2:2000 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms

View more information
US$142.51
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.