I.S. EN 15194:2017

Current

Current The latest, up-to-date edition.

Preview

CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES

Publisher: National Standards Authority of Ireland

Published: 01-01-2017

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Table of Contents - (Show below) - (Hide below)

National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Marking, labeling
6 Instruction for use
Annex A (informative) - Example of recommendation
        for battery charging
Annex B (informative) - Example of relation between
        speed, torque and current
Annex C (normative) - Electromagnetic compatibility
        of EPAC and ESA
Annex D (informative) - Steering geometry
Annex E (normative) - Dummy fork characteristics
Annex F (informative) - Explanation of the method of
        least squares for obtaining line of best fit and +/-
        20% limit lines for braking performance linearity
Annex G (normative) - Fork mounting fixture
Annex H (informative) - Wheel/tyre assembly - Fatigue test
Annex I (normative) - Light, warning device, on/off symbols
Annex J (informative) - Walk assist mode symbols
Annex ZA (informative) - Relationship between this
         European Standard and the essential requirements
         of EU Directive 2006/42/EC aimed to be covered
Bibliography

Abstract - (Show below) - (Hide below)

Pertains to EPAC bicycles for private and commercial use with exception of EPAC intended for hire from unattended station.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	National Standards Authority of Ireland
Pages
ISBN

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
EN 15194 : 2017	Identical

Standards Referencing This Book - (Show below) - (Hide below)

CISPR 14-1 : 6.0	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION
CISPR 12 : 6.1	VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS
EN ISO 3452-2 : 2013	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
ISO 11452-3 : 2016	ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 3: TRANSVERSE ELECTROMAGNETIC (TEM) CELL
IEC 60245-1 : 4.1	RUBBER INSULATED CABLES - RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 1: GENERAL REQUIREMENTS
ISO 7010 : 2011	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
EN 60068-2-75 : 2014	ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS (IEC 60068-2-75:2014)
EN 61000-6-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
EN ISO 11243 : 2016	CYCLES - LUGGAGE CARRIERS FOR BICYCLES - REQUIREMENTS AND TEST METHODS (ISO 11243:2016)
ISO 8098 : 2014	CYCLES - SAFETY REQUIREMENTS FOR BICYCLES FOR YOUNG CHILDREN
EN ISO 3452-1 : 2013 COR 2014	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES (ISO 3452-1:2013, CORRECTED VERSION 2014-05-01)
EN 61000-6-3 : 2007 AMD 1/COR 12	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
EN 50272-4 : 2007	SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 4: BATTERIES FOR USE IN PORTABLE APPLIANCES
IEC 61960 : 2.0	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS
EN 60034-1 : 2010 COR 2010	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
EN 62281 : 2017	SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT (IEC 62281:2016)
EN ISO 3452-3 : 2013	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013)
EN 61951-1 : 2017	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 1: NICKEL-CADMIUM (IEC 61951-1:2017)
CISPR 16-1-1 : 4.0	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS
ISO 6742-1 : 2015	CYCLES - LIGHTING AND RETRO-REFLECTIVE DEVICES - PART 1: LIGHTING AND LIGHT SIGNALLING DEVICES
EN 61000-3-3 : 2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013)
ISO 11452-4 : 2011	ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 4: HARNESS EXCITATION METHODS
CISPR 14-2 : 2.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD
ISO 8124-1 : 2014	SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES
ISO 9633 : 2001(R2017)	CYCLE CHAINS - CHARACTERISTICS AND TEST METHODS
IEC 61000-6-1 : 3.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
EN 61000-4-2 : 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
EN 82079-1 : 2012	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012)
EN 60335-2-29 : 2004 AMD 2 2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
ISO 12100 : 2010(R2015)	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
ISO 6742-2 : 2015	CYCLES - LIGHTING AND RETRO-REFLECTIVE DEVICES - PART 2: RETRO-REFLECTIVE DEVICES
ISO 2575 : 2010	ROAD VEHICLES - SYMBOLS FOR CONTROLS, INDICATORS AND TELL-TALES
ISO 5775-1 : 2014	BICYCLE TYRES AND RIMS - PART 1: TYRE DESIGNATIONS AND DIMENSIONS
ISO 3452-1 : 2013	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES
CISPR 25 : 4.0:2016	VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS
IEC TR 62188 : 1.0:2003	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - DESIGN AND MANUFACTURING RECOMMENDATIONS FOR PORTABLE BATTERIES MADE FROM SEALED SECONDARY CELLS
IEC 61000-6-3 : 2.1	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
EN 61951-2 : 2017	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 2: NICKEL-METAL HYDRIDE (IEC 61951-2:2017)
EN 61959 : 2004	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES
ISO 3452-3 : 2013	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS
ISO 11243 : 2016	CYCLES - LUGGAGE CARRIERS FOR BICYCLES - REQUIREMENTS AND TEST METHODS
ISO 5775-2 : 2015	BICYCLE TYRES AND RIMS - PART 2: RIMS
EN 55014-2 : 2015	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD (CISPR 14-2:2015)
IEC 61951-2 : 4.0	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 2: NICKEL-METAL HYDRIDE
ISO 3452-2 : 2013	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
IEC 61951-1 : 4.0	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS - PART 1: NICKEL-CADMIUM
EN 22248 : 1992	COMPLETE, FILLED TRANSPORT PACKAGES - METHOD FOR DETERMINATION OF RESISTANCE TO VERTICAL IMPACT BY DROPPING
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
ISO 11452-2 : 2004(R2008)	ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 2: ABSORBER-LINED SHIELDED ENCLOSURE
IEC 61000-4-2 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST
ISO 11452-1 : 2015	ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 1: GENERAL PRINCIPLES AND TERMINOLOGY
ISO 13849-2 : 2012(R2018)	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
EN 61960 : 2011	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS
EN 61000-3-2 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) (IEC 61000-3-2:2014)
IEC 60034-1 : 13.0	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
IEC 60335-2-29 : 5.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
EN ISO 12100 : 2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
EN ISO 13849-2 : 2012	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
IEC 60068-2-75 : 2014	ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
EN ISO 13849-1 : 2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
ISO 11452-5 : 2002(R2018)	ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 5: STRIPLINE
EN 60335-1 : 2012 AMD 13 2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
IEC 62133 : 2.0EN+(REDLINE+VERSION)	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
EN ISO 8098 : 2014 COR 2014	CYCLES - SAFETY REQUIREMENTS FOR BICYCLES FOR YOUNG CHILDREN (ISO 8098:2014)
EN 55012 : 2007 AMD 1 2009	VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS
EN 60529 : 1991 COR 2016	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 82079-1 : 1.0	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
ISO 13715 : 2017	TECHNICAL PRODUCT DOCUMENTATION - EDGES OF UNDEFINED SHAPE - INDICATION AND DIMENSIONING
ISO 2248 : 1985(R2016)	PACKAGING - COMPLETE, FILLED TRANSPORT PACKAGES - VERTICAL IMPACT TEST BY DROPPING
EN 50604-1 : 2016	SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
IEC 61959 : 1.0	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES
ISO 13849-1 : 2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
IEC 62281 : 3.0	SAFETY OF PRIMARY AND SECONDARY LITHIUM CELLS AND BATTERIES DURING TRANSPORT
EN ISO 7010 : 2012 AMD 7 2017	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
ASTM E 467 : 2008	PRACTICE FOR VERIFICATION OF CONSTANT AMPLITUDE DYNAMIC FORCES IN AN AXIAL FATIGUE TESTING SYSTEM
ISO 3452-4 : 1998(R2016)	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - EQUIPMENT
EN 55014-1 : 2017	ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION (CISPR 14-1:2016 + COR1:2016)
IEC 60364-5-52 : 3.0	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS
EN 55016-1-1 : 2010 AMD 2 2014	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014)
ISO 11451-1 : 2015	ROAD VEHICLES - VEHICLE TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 1: GENERAL PRINCIPLES AND TERMINOLOGY
IEC 61000-3-2 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
EN ISO 3452-4 : 1998	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - EQUIPMENT
EN 62133 : 2013	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS (IEC 62133:2012)

Add To Cart

Product Format

Quantity

add to cart

I.S. EN 15194:2017

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?