|
EN 751-3:1996/AC:1997
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
|
|
EN 15033:2006/AC:2008
|
ROOM SEALED STORAGE WATER HEATERS FOR THE PRODUCTION OF SANITARY HOT WATER USING LPG FOR VEHICLES AND BOATS
|
|
EN 12864:2001/A3:2009
|
LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES
|
|
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
|
|
ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
|
|
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
|
|
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
|
|
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
|
|
EN 50291:2001
|
Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements
|
|
EN 732:1998
|
Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators
|
|
EN 751-2:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
|
|
EN 561:2002
|
Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
|
|
ISO 14113:2013
|
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
|
|
2009/142/EC : 2009
|
DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 30 NOVEMBER 2009 RELATING TO APPLIANCES BURNING GASEOUS FUELS (TEXT WITH EEA RELEVANCE)
|
|
EN 13878 : 2003
|
LEISURE ACCOMMODATION VEHICLES - TERMS AND DEFINITIONS
|
|
EN ISO 3166-1:2014
|
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
|
|
EN 50291-2:2010
|
Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements
|
|
EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
|
|
EN 10305-1:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
|
|
EN ISO 1127:1996
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
|
|
ISO 8434-2:2007
|
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
|
|
EN 12979:2002
|
Automotive LPG-systems - Installation requirements
|
|
EN 624:2011
|
Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
|
|
EN 13786:2004+A1:2008
|
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
|
|
EN ISO 8434-1:2007/AC:2009
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
|
|
EN 13785:2005+A1:2008
|
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
|
|
ISO 3166-1:2013
|
Codes for the representation of names of countries and their subdivisions Part 1: Country codes
|
|
EN ISO 14113:2013
|
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
|
|
EN 14291:2004
|
Foam producing solutions for leak detection on gas installations
|
|
EN 331:2015
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
|
|
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
|
|
EN 1647:2012
|
Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety
|
|
ISO 1127:1992
|
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length
|
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.