I.S. EN 485-1:2016
Current
Current
The latest, up-to-date edition.
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2016
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Requirements
6 Test methods
7 Inspection document
8 Marking of products
9 Packaging
10 Complaints of non conformity
Annex A (normative) - European Standards for
strip, sheet and plate of special form
and for special applications
Bibliography
Describes the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium alloy sheet, strip and plate for general applications.
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 485-1 : 2016 | Identical |
| SN EN 485-1 : 2016 | Identical |
| EN 485-1:2016 | Identical |
| NS EN 485-1 : 2016 | Identical |
| UNE-EN 485-1:2017 | Identical |
| UNI EN 485-1 : 2009 | Identical |
| DIN EN 485-1:2016-10 | Identical |
| BS EN 485-1 : 2008 | Identical |
| NEN EN 485-1 : 2016 | Identical |
| NBN EN 485-1 : 2008 + A1 2010 | Identical |
| S.R. 325:2013+A2:2018/AC:2019 | RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES IN IRELAND TO EUROCODE 6 |
| S.R. 82:2017 | SLATING AND TILING - CODE OF PRACTICE |
| I.C.P. 2:2002 | SLATING AND TILING |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ASTM G 67 : 2013 | Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 20482:2013 | Metallic materials — Sheet and strip — Erichsen cupping test |
| EN 851:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 573-5:2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 485-3:2003 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN 485-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN ISO 20482:2013 | Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013) |
| EN 683-1:2006 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| ISO 9591:2004 | Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking |
| ISO 7438:2016 | Metallic materials Bend test |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 602:2004 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff |
| EN 13195:2013 | Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) |
| ASTM G 66 : 1999 | Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) |
| EN 14392:2007 | Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff |
| EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 941:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
| EN 2004-1 : 1993 | AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 1: DETERMINATION OF ELECTRICAL CONDUCTIVITY OF WROUGHT ALUMINIUM ALLOYS |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 12482-2:1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
| EN 14287:2004 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| EN 1386:2007 | Aluminium and aluminium alloys - Tread plate - Specifications |
| EN 14361:2004 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| EN 12482-1:1998 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 15088:2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| EN 1669:1996 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
US$40.56
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.