• There are no items in your cart

I.S. EN 50155:2017-11

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
Available format(s)

Hardcopy , PDF

Superseded date

08-31-2021

Language(s)

English

Published date

11-01-2017

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 General requirements
5 Electrical service conditions
6 Reliability, maintainability and expected useful life
7 Design
8 Non-railway designed electronic equipment
9 Components
10 Construction
11 Safety
12 Documentation
13 Testing
Annex A (informative) - List of default requirements of
        EN 50155 and related clauses
Annex B (informative) - Testing approach
Annex C (informative) - Severity of the service conditions
        in different rolling stock locations
Annex D (informative) - Example of test report compliance
        Summary
Annex F (informative) - Design guidelines for electronic hardware
        used on board of rolling stock
Annex G (informative) - Non-railway designed electronic equipment
Annex H (informative) - Paragraphs with Agreements between the
        involved Parties
Annex ZZ (informative) - Relationship between this European Standard
         and the Essential Requirements of EU Directive 2008/57/EC
Bibliography

This European Standard applies to all electronic equipment for control, regulation, protection,
diagnostic, energy supply, etc. installed on rail vehicles.

DocumentType
Standard
Pages
0
ProductNote
Reproducible but contains colour pages, advice dispatch. (Shilp 12/2017) This standard also referes : IPC-7711B/7721B:2007
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
BS EN 50155:2017 Identical
NEN EN 50155 : 2017 Identical
NBN EN 50155 : 2007 Identical
NF EN 50155 : 2007 Identical

NASA HDBK 4008 : 2013 PROGRAMMABLE LOGIC DEVICES (PLD) HANDBOOK
IPC A 600 : H ACCEPTABILITY OF PRINTED BOARDS
EN 60352-2:2006/A1:2013 SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE
IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
IEC 61123:1991 Reliability testing - Compliance test plans for success ratio
IPC 2220 : LATEST IPC 2220 FAMILY OF DESIGN DOCUMENTS
IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
IEC 60605-4:2001 Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
IEC 60319:1999 Presentation and specification of reliability data for electronic components
EN 60300-3-2 : 2005 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
EN 50121-3-2:2016 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 61014:2003 Programmes for reliability growth
IEC 61249-2-7:2002 Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60605-6:2007 Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
IEC 61070:1991 Compliance test procedures for steady-state availability
EN 60721-3-5:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
EN 50153 : 2014 AMD 1 2017 RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS
IEC 60068-2-11:1981 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
MIL-HDBK-781 Revision A:1996 RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION
IEC 60850:2014 Railway applications - Supply voltages of traction systems
EN 61163-1 : 2006 RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS
IEC 61163-1:2006 Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
EN 61249-2-7:2002/corrigendum:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
IEC TR 62380:2004 Reliability data handbook - Universal model for reliability prediction of electronics components, PCBs and equipment
EN 50657:2017 Railways Applications - Rolling stock applications - Software on Board Rolling Stock
ISO/IEC/IEEE 15289:2017 Systems and software engineering Content of life-cycle information items (documentation)
IPC A 610 : F ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
IPC 4101 : D SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS
EN 61249-2-22:2005 Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
IEC 60352-1:1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
EN 50124-1:2017 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
EN 50125-1:2014 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
IEC 61124:2012 Reliability testing - Compliance tests for constant failure rate and constant failure intensity
IPC 2221B:2012 GENERIC STANDARD ON PRINTED BOARD DESIGN
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 50126-1:2017 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process
IEC 60605-2:1994 Equipment reliability testing - Part 2: Design of test cycles
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
EN 61082-1:2015 Preparation of documents used in electrotechnology - Part 1: Rules
EN 50163 : 2004 COR 2013 RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
ISO 9001:2015 Quality management systems — Requirements
IPC 2222 : A SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
EN 61014 : 2003 Programmes for reliability growth
IEC 60352-2:2006+AMD1:2013 CSV Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
EN 60352-1:1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
EN 60068-2-11:1999 Environmental testing - Part 2: Tests - Test Ka: Salt mist
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 61249-2-22:2005 Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO/IEC 90003:2014 Software engineering Guidelines for the application of ISO 9001:2008 to computer software
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IPC 6013 : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS
IPC 2581 : B GENERIC REQUIREMENTS FOR PRINTED BOARD ASSEMBLY PRODUCTS MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY
IPC 2223 : C SECTIONAL DESIGN STANDARD FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS
EN 61124:2012 RELIABILITY TESTING - COMPLIANCE TESTS FOR CONSTANT FAILURE RATE AND CONSTANT FAILURE INTENSITY (IEC 61124:2012)
IEC 62506:2013 Methods for product accelerated testing
EN 62506 : 2013 METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013)
EN 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
US$152.38
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.