I.S. EN 60204-1:2006

Superseded View Superseded By

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Preview

SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

Publisher: National Standards Authority of Ireland

Published: 01-01-2006

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirements
   4.1 General considerations
   4.2 Selection of equipment
   4.3 Electrical supply
   4.4 Physical environment and operating conditions
   4.5 Transportation and storage
   4.6 Provisions for handling
   4.7 Installation and operation
5 Incoming supply conductor terminations and devices for
   disconnecting and switching off
   5.1 Incoming supply conductor terminations
   5.2 External protective conductor terminal
   5.3 Supply disconnecting (isolating) device
   5.4 Devices for switching off for prevention of unexpected
        start-up
   5.5 Devices for disconnecting electrical equipment
   5.6 Protection against unauthorized, inadvertent and/or
        mistaken connection
6 Protection against electric shock
   6.1 General
   6.2 Protection against direct contact
   6.3 Protection against indirect contact
   6.4 Protection by the use of PELV
7 Protection of equipment
   7.1 General
   7.2 Overcurrent protection
   7.3 Overload protection of motors
   7.4 Abnormal temperature protection
   7.5 Protection against supply interruption or voltage
        reduction and subsequent restoration
   7.6 Motor overspeed protection
   7.7 Earth fault/residual current protection
   7.8 Phase sequence protection
   7.9 Protection against overvoltages due to lightning and to
        switching surges
8 Equipotential bonding
   8.1 General
   8.2 Protective bonding circuit
   8.3 Functional bonding
   8.4 Measures to limit the effects of high leakage current
9 Control circuits and control functions
   9.1 Control circuits
   9.2 Control functions
   9.3 Protective interlocks
   9.4 Control functions in the event of failure
10 Operator interface and machine mounted control devices
   10.1 General
   10.2 Push-buttons
   10.3 Indicator lights and displays
   10.4 Illuminated push-buttons
   10.5 Rotary control devices
   10.6 Start devices
   10.7 Devices for emergency stop
   10.8 Devices for emergency switching off
   10.9 Displays
11 Controlgear: location, mounting, and enclosures
   11.1 General requirements
   11.2 Location and mounting
   11.3 Degrees of protection
   11.4 Enclosures, doors and openings
   11.5 Access to control gear
12 Conductors and cables
   12.1 General requirements
   12.2 Conductors
   12.3 Insulation
   12.4 Current-carrying capacity in normal service
   12.5 Conductor and cable voltage drop
   12.6 Flexible cables
   12.7 Conductor wires, conductor bars and slip-ring assemblies
13 Wiring practices
   13.1 Connections and routing
   13.2 Identification of conductors
   13.3 Wiring inside enclosures
   13.4 Wiring outside enclosures
   13.5 Ducts, connection boxes and other boxes
14 Electric motors and associated equipment
   14.1 General requirements
   14.2 Motor enclosures
   14.3 Motor dimensions
   14.4 Motor mounting and compartments
   14.5 Criteria for motor selection
   14.6 Protective devices for mechanical brakes
15 Accessories and lighting
   15.1 Accessories
   15.2 Local lighting of the machine and equipment
16 Marking, warning signs and reference designations
   16.1 General
   16.2 Warning signs
   16.3 Functional identification
   16.4 Marking of equipment
   16.5 Reference designations
17 Technical documentation
   17.1 General
   17.2 Information to be provided
   17.3 Requirements applicable to all documentation
   17.4 Installation documents
   17.5 Overview diagrams and function diagrams
   17.6 Circuit diagrams
   17.7 Operating manual
   17.8 Maintenance manual
   17.9 Parts list
18 Verification
   18.1 General
   18.2 Verification of conditions for protection by automatic
        disconnection of supply
   18.3 Insulation resistance tests
   18.4 Voltage tests
   18.5 Protection against residual voltages
   18.6 Functional tests
   18.7 Retesting
Annex A (normative) Protection against indirect contact in
        TN-systems
Annex B (informative) Enquiry form for the electrical equipment
        of machines
Annex C (informative) Examples of machines covered by this part
        of IEC
Annex D (informative) Current-carrying capacity and overcurrent
        protection of conductors and cables in the electrical
        equipment of machines
Annex E (informative) Explanation of emergency operation functions
Annex F (informative) Guide for the use of this part of IEC
Annex G (informative) Comparison of typical conductor
        cross-sectional areas
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Annex ZZ (informative) Coverage of Essential Requirements of
         EC Directives
Bibliography
Index

Abstract - (Show below) - (Hide below)

Applies to the application of electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Superseded
Publisher	National Standards Authority of Ireland
Pages
ISBN
Supersedes	I.S. EN 60204-1:1998
Superseded By	I.S. EN 60204-1:2018

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN 60204-1 : 2010	Identical
SN EN 60204-1 : 2006	Identical
UNE EN 60204-1 : 2007	Identical
EN 60204-1 : 2006 COR 2010	Identical
NBN EN 60204-1 : 2006 AMD 1 2009	Identical
IEC 60204-1 : 6.0:2016	Identical
NF EN 60204-1 : 2006 AMD 1 2009	Identical
NEN EN 60204-1 : 95 C2 96	Identical
BS EN 60204-1 : 2006	Identical
UNE-EN 60204-1:2007	Identical
BS EN 60204-1 : 2006	Identical
SN EN 60204-1 : 2006	Identical
DIN EN 60204-1 : 2010	Identical
NBN EN 60204-1 : 2006 AMD 1 2009	Identical
UNE EN 60204-1 : 2007	Identical
NEN EN 60204-1 : 95 C2 96	Identical
EN 60204-1 : 2006 COR 2010	Identical

Standards Referencing This Book - (Show below) - (Hide below)

EN 60446 : 2007	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
IEC 61800-3 : 3.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
IEC 60364-5-54 : 3.0	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
IEC 60038 : 7.0	IEC STANDARD VOLTAGES
IEC 61000-6-4:2006+AMD1:2010 CSV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60364-4-43 : 2008	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT
IEC 60228 : 3.0	CONDUCTORS OF INSULATED CABLES
ISO 14122-3 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS
IEC 61984 : 2.0	CONNECTORS - SAFETY REQUIREMENTS AND TESTS
ISO 14122-1 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS
IEC 60417-DB-12M : 1.0	GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - 12-MONTH SUBSCRIPTION TO ONLINE DATABASE COMPRISING ALL PARTS OF IEC 60417
IEC 60204-31 : 4.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
EN 62023 : 2012 COR 2012	STRUCTURING OF TECHNICAL INFORMATION AND DOCUMENTATION (IEC 62023:2011)
EN 60034-1 : 2010 COR 2010	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
IEC 60364-4-41 : 5.1	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
IEC 60073 : 6.0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
EN 60073 : 2002	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
EN 61558-1 : 2005 AMD 1 2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 62023 : 2011	STRUCTURING OF TECHNICAL INFORMATION AND DOCUMENTATION
IEC 61082-4 : 1.0	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - LOCATION AND INSTALLATION DOCUMENTS
IEC GUIDE 106 : 2.0	GUIDE FOR SPECIFYING ENVIRONMENTAL CONDITIONS FOR EQUIPMENT PERFORMANCE RATING
IEC 60364-5-53 : 3.2	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL
IEC 60034-11 : 0	ROTATING ELECTRICAL MACHINES - PART 11: THERMAL PROTECTION
HD 60364-4-41 : 2017 AMD 11 2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
HD 60364-5-54 : 2011 AMD 11 2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
EN ISO 13850 : 2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
IEC 61000-6-1 : 3.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC 60204-11 : 1.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 60446 : 0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
ISO 14118 : 2000	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
ISO 13851 : 2002(R2012)	SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS AND DESIGN PRINCIPLES
IEC 60204-32 : 2.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC 60269-1 : 4.2	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
IEC 62027 : 2011	PREPARATION OF OBJECT LISTS, INCLUDING PARTS LISTS
IEC 61558-2-6 : 2.0	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS
IEC 60617-DB-12M : 1.0 : 2001	GRAPHICAL SYMBOLS FOR DIAGRAMS - 12-MONTH SUBSCRIPTION TO ONLINE DATABASE COMPRISING PARTS 2 TO 11 OF IEC 60617
IEC 60947-7-1 : 3.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
EN 61082-3 : 1994	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - CONNECTION DIAGRAMS, TABLES AND LISTS
IEC TR 61000-5-2 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - TECHNICAL REPORT - TYPE 3 - INSTALLATION AND MITIGATION GUIDELINES - EARTHING AND CABLING
IEC 61082-1 : 3.0EN+(REDLINE+VERSION)	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
EN 60947-1 : 2007 AMD 2 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
IEC 60757 : 1.0	CODE FOR DESIGNATION OF COLOURS
IEC 60072-1 : 6.0	DIMENSIONS AND OUTPUT SERIES FOR ROTATING ELECTRICAL MACHINES - FRAME NUMBERS 56 TO 400 AND FLANGE NUMBERS 55 TO 1080
EN 61557-3 : 2007	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 3: LOOP IMPEDANCE
IEC 61082-3 : 1.0	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - CONNECTION DIAGRAMS, TABLES AND LISTS
EN 60947-3 : 2009 AMD 2 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
IEC 61558-2-17 : 1.0	SAFETY OF POWER TRANSFORMERS, POWER SUPPLY UNITS AND SIMILAR - PART 2: PARTICULAR REQUIREMENTS FOR TRANSFORMERS FOR SWITCH MODE POWER SUPPLIES
EN 60447 : 2004	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
IEC 61180-2 : 1.0	HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
IEC 61200-53 : 1.0	ELECTRICAL INSTALLATION GUIDE - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
IEC 61558-1 : 3.0	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 60447 : 3.0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
EN ISO 12100-1 : 2003 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 60034-11 : 2004	ROTATING ELECTRICAL MACHINES - PART 11: THERMAL PROTECTION
IEC 61084-1 : 2.0	CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
CISPR 61000-6-3 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6: GENERIC STANDARDS - SECTION 3: EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
EN 61082-2 : 1994	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 2: FUNCTION-ORIENTED DIAGRAMS
IEC 60947-1 : 5.2	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
EN 62079 : 2001	PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
EN 62061 : 2005 AMD 2 2015	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
EN 60664-1 : 2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
IEC 60439-1 : 4.1	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
ISO 13849-2 : 2012(R2018)	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
IEC 60364-6-61 : 2.0	ELECTRICAL INSTALLATIONS OF BUILDINGS - VERIFICATION - VERIFICATION - INITIAL VERIFICATION
ISO 12100-2 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 62079 : 1.0	PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
EN 61082-1 : 2015	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES (IEC 61082-1:2014)
IEC 60034-1 : 13.0	ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
EN ISO 12100-2 : 2003 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61496-1 : 3.0	SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 60072-2 : 1.0	DIMENSIONS AND OUTPUT SERIES FOR ROTATING ELECTRICAL MACHINES - FRAME NUMBERS 355 TO 1000 AND FLANGE NUMBERS 1180 TO 2360
EN 60439-1 : 99 AMD 1 2004	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
HD 516 : S2 AMD 2 2008	GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES
ISO 3864-1 : 2011(R2016)	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS
EN 61082-4 : 1996	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - LOCATION AND INSTALLATION DOCUMENTS
EN ISO 13849-2 : 2012	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
ISO 12100-1 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 13849-1 : 2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
EN 61140 : 2016	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016)
ISO 13850 : 2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
IEC 60947-5-2 : 3.1	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
EN 61558-2-6 : 2009	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS
IEC 60947-3 : 3.2	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS
EN 61984 : 2009	CONNECTORS - SAFETY REQUIREMENTS AND TESTS
IEC 60947-2 : 2016	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS
EN 60529 : 1991 COR 2016	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000 : 2014	GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - REGISTERED SYMBOLS
IEC 62061 : 1.2:2015	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
IEC 61140 : 4.0:2016	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATIONS AND EQUIPMENT
EN 60947-2 : 2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS (IEC 60947-2:2016 + COR1:2016)
ISO 14122-2 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS
EN 60947-7-1 : 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
EN 62027 : 2012	PREPARATION OF OBJECT LISTS, INCLUDING PARTS LISTS (IEC 62027:2011)
IEC 60309-1 : 4.2	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
ISO 13849-1 : 2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
IEC 61000-6-2 : 3.0:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60445 : 6.0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
IEC 60664-1 : 2.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
EN 60034-5 : 2001 AMD 1 2007	ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
IEC 61800-5-1 : 0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY
IEC 60364-5-52 : 3.0	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS
IEC 61082-2 : 1.0	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - FUNCTION ORIENTED DIAGRAMS
EN 60309-1 : 99 AMD 1/COR 2014	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
IEC 61557-3 : 2.0	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 3: LOOP IMPEDANCE

Add To Cart

Product Format

Quantity

add to cart

I.S. EN 60204-1:2006

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?