I.S. EN 60320-1:2015

Superseded View Superseded By

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Preview

APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS

Publisher: National Standards Authority of Ireland

Published: 01-01-2015

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Table of Contents - (Show below) - (Hide below)

National Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General notes on tests
6 Standard ratings
7 Classification of appliance couplers
8 Marking
9 Dimensions and compatibility
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction
14 Moisture resistance
15 Insulation resistance and electric strength
16 Forces necessary to insert and to withdraw
   the connector/appliance outlet
17 Operation of contacts
18 Resistance to heating of appliance couplers for
   hot conditions or very hot conditions
19 Breaking capacity
20 Normal operation
21 Temperature rise
22 Cords and their connection
23 Mechanical strength
24 Resistance to heat and ageing
25 Screws, current-carrying parts and connections
26 Clearances, creepage distances and solid insulation
27 Resistance of insulating material to heat, fire and tracking
28 Resistance to rusting
29 Electromagnetic compatibility (EMC) requirements
Annex A (normative) - Proof tracking test
Annex B (normative) - Routine tests for factory wired
        appliance couplers related to safety
Annex C (normative) - Test schedule
Annex D (informative) - Comparison of typical conductor
        cross-sectional areas
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Abstract - (Show below) - (Hide below)

Defines the general requirements for appliance couplers for two poles and two poles with earth contact and for the connection of electrical devices for household and similar onto the mains supply.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Superseded
Publisher	National Standards Authority of Ireland
Pages
ISBN
Superseded By	I.S. EN 60320-1:2015&AC:2016&AC:2019-06

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN 60320-1 : 2015 COR 2016	Identical
SN EN 60320-1 : 2015	Identical
DIN EN 60320-1 : 2016	Identical
BS EN 60320-1 : 2015	Identical
NF EN 60320-1 : 2017	Identical
UNE-EN 60320-1:2016	Identical
EN 60320-1 : 2015 COR 2016	Identical
NEN EN 60320-1 : 90 AMD 11 95	Identical
BS EN 60320-1 : 2015	Identical
UNE-EN 60320-1:2016	Identical

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60112 : 4.1	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
EN 60068-2-75 : 2014	ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS (IEC 60068-2-75:2014)
IEC 60730-2-11 : 2.0	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-11: PARTICULAR REQUIREMENTS FOR ENERGY REGULATORS
EN 60068-2-60 : 2015	ENVIRONMENTAL TESTING - PART 2-60: TESTS - TEST KE: FLOWING MIXED GAS CORROSION TEST (IEC 60068-2-60:2015)
IEC 60068-2-60 : 3.0EN+(REDLINE+VERSION)	ENVIRONMENTAL TESTING - PART 2-60: TESTS - TEST KE: FLOWING MIXED GAS CORROSION TEST
EN 60695-10-2 : 2014	FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD (IEC 60695-10-2:2014)
IEC 60695-2-11 : 2.0	FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS
IEC 60068-2-31 : 2.0:2008	ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
ISO 2081 : 2008	METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
IEC 60695-2-13 : 2.1	FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS
EN 60112 : 2003 AMD 1 2009	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC 60999-1 : 2.0	CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED)
EN 60695-2-13 : 2010 AMD 1 2014	FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014)
ISO 1456 : 2009(R2017)	METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COPPER PLUS NICKEL PLUS CHROMIUM
IEC 60695-2-12 : 2.1	FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS
EN 60695-2-10 : 2013	FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013)
IEC 60364-4-44 : 2.1	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES
ISO 2093 : 1986(R2017)	ELECTROPLATED COATINGS OF TIN - SPECIFICATION AND TEST METHODS
EN 60664-1 : 2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
EN 60730-2-11 : 2008	AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-11: PARTICULAR REQUIREMENTS FOR ENERGY REGULATORS
IEC 60068-2-75 : 2014	ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
EN 60999-1 : 2000	CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED)
IEC 60695-10-2 : 3.0 : 2014	FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
IEC 61140 : 4.0:2016	PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATIONS AND EQUIPMENT
IEC 60695-2-10 : 2.0 : 2013	FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
EN 60695-2-12 : 2010 AMD 1 2014	FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014)
IEC 60320-3 : 1ED 2014	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
IEC 60664-1 : 2.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
EN 60695-2-11 : 2014	FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT) (IEC 60695-2-11:2014)
EN 60320-3 : 2014	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES (IEC 60320-3:2014)
EN 60068-2-31 : 2008	ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS

Add To Cart

Product Format

Quantity

add to cart

I.S. EN 60320-1:2015

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?