I.S. EN 60335-2-77:2010

Current

Current The latest, up-to-date edition.

Preview

SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS

Publisher: National Standards Authority of Ireland

Published:

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Table of Contents - (Show below) - (Hide below)

Introduction
1 Scope
2 Normative references
3 Definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
13 Leakage current and electric strength at operating
   temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated
   circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid
   insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annexes
Annex B (normative) Appliances powered by rechargeable
        batteries
Annex AA (normative) Safety signs and symbols
Annex BB (normative) Test enclosure target panels - Corrugated
         fibreboard penetration test
Annex CC (normative) Target panel elevation areas and suggested
         data sheet for thrown object
Annex DD (normative) Test enclosure
Annex EE (informative) Safety instructions for lawnmowers
Annex FF (normative) Vibration
Annex GG (normative) Noise test code - Engineering method
         (grade 2)
Annex HH (informative) Example of a material and construction
         fulfilling the requirements for an artificial surface
Annex ZZ (informative) Coverage of Essential Requirements of EC
         Directives
Bibliography

Abstract - (Show below) - (Hide below)

Defines safety requirements and their verification for the design and construction of pedestrian controlled walk-behind electrically powered lawnmowers.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	National Standards Authority of Ireland
Pages
ISBN
Supersedes	I.S. EN 50338:2006 I.S. 205-3-1:1986

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
EN 60335-2-77 : 2010	Identical
NF EN 60335-2-77 : 2011	Identical
DIN EN 60335-2-77 : 2011	Identical
BS EN 60335-2.77 : 2010	Identical
IEC 60335-2-77 : 2.0	Identical
UNE EN 60335-2-77 : 2011	Identical
SN EN 60335-2-77 : 2006	Identical
DIN EN 60335-2-77 : 2011	Identical
UNE EN 60335-2-77 : 2011	Identical
NF EN 60335-2-77 : 2011	Identical
SN EN 60335-2-77 : 2006	Identical
IEC 60335-2-77 : 2.0	Identical

Standards Referencing This Book - (Show below) - (Hide below)

EN ISO 3767-3 : 1996	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 3: SYMBOLS FOR POWERED LAWN AND GARDEN EQUIPMENT
ISO 500 : 1991	AGRICULTURAL TRACTORS - REAR-MOUNTED POWER TAKE-OFF - TYPES 1, 2 AND 3
ISO TR 11688-1 : 1995(R2009)	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING
EN ISO 11201 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
EN ISO 3767-2 : 95 AMD 2 2000	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 2: SYMBOLS FOR AGRICULTURAL TRACTORS AND MACHINERY
EN ISO 3767-1 : 2000	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 1: COMMON SYMBOLS
ISO 3864 : 1984	SAFETY COLOUR AND SAFETY SIGNS
ISO 12100-1 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 3767-5 : 1995	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 5: SYMBOLS FOR MANUAL PORTABLE FORESTRY MACHINERY
ISO 4200 : 1991(R2018)	PLAIN END STEEL TUBES, WELDED AND SEAMLESS - GENERAL TABLES OF DIMENSIONS AND MASSES PER UNIT LENGTH
EN ISO 3744 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ISO 4046 : 1978	PAPER, BOARD, PULP AND RELATED TERMS - VOCABULARY
EN ISO 11688-1 : 2009	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING (ISO/TR 11688-1:1995)
EN ISO 12100-2 : 2003 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 60320-2-3 : 1998 AMD 1 2005	APPLIANCE COUPLER FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-3: APPLIANCE COUPLER WITH A DEGREE OF PROTECTION HIGHER THAN IPX0
ISO 20643:2005(R2014)	MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION
EN ISO 12100-1 : 2003 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
ISO 3767-3 : 2016	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 3: SYMBOLS FOR POWERED LAWN AND GARDEN EQUIPMENT
ISO 7010 : 2011	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS
ISO 2758 : 2014	PAPER - DETERMINATION OF BURSTING STRENGTH
ISO 354 : 2003(R2015)	ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM
ISO 7000 : 2014	GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - REGISTERED SYMBOLS
ISO 3305 : 1985(R2018)	PLAIN END WELDED PRECISION STEEL TUBES - TECHNICAL CONDITIONS FOR DELIVERY
ISO 11684 : 1995(R2015)	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SAFETY SIGNS AND HAZARD PICTORIALS - GENERAL PRINCIPLES
IEC 60335-2-29 : 5.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
EN 60335-2-29 : 2004 AMD 2 2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
ISO 13857 : 2008(R2011)	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
IEC 60320-2-3 : 1.1	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 2-3: APPLIANCE COUPLERS WITH A DEGREE OF PROTECTION HIGHER THAN IPX0
ISO 3304 : 1985	PLAIN END SEAMLESS PRECISION STEEL TUBES - TECHNICAL CONDITIONS FOR DELIVERY
ISO 3767-2 : 2016	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 2: SYMBOLS FOR AGRICULTURAL TRACTORS AND MACHINERY
EN ISO 20643 : 2008 AMD 1 2012	MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005/AMD 1:2012)
EN ISO 13857 : 2008	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
ISO 12100-2 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 60335-1 : 2012 AMD 13 2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN ISO 354 : 2003	ACOUSTICS - MEASUREMENT OF SOUND ABSORPTION IN A REVERBERATION ROOM
ISO 3767-1 : 2016	TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS - PART 1: COMMON SYMBOLS
ISO 3306 : 1985(R2018)	PLAIN END AS WELDED AND SIZED PRECISION STEEL TUBES - TECHNICAL CONDITIONS FOR DELIVERY
ISO 3744:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ISO 11201 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS

Add To Cart

Product Format

Quantity

add to cart

I.S. EN 60335-2-77:2010

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?