Customer Support: +1 416-401-8730

Login to i2i Subscription Intertek.com
  • There are no items in your cart
Please enter a keyword to search
Advanced search
Home
NSAI
I.S. EN 61189-5:2006

I.S. EN 61189-5:2006

Current

Current

The latest, up-to-date edition.

TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2006

Publisher

National Standards Authority of Ireland

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Accuracy, precision and resolution
   3.1 Accuracy
   3.2 Precision
   3.3 Resolution
   3.4 Report
   3.5 Student's t distribution
   3.6 Suggested uncertainty limits
4 Catalogue of approved test methods
5 P: Preparation/conditioning test methods
   5.1 Test 5P01: Test-board design guideline
   5.2 Test 5P02: Standard mounting process for CSP/BGA packages
6 V: Visual test methods
7 D: Dimensional test methods
8 C: Chemical test methods
   8.1 Test 5C01: Corrosion, flux
9 M: Mechanical test methods
   9.1 Test 5M01: Peel test method for test-board land
10 E: Electrical test methods
   10.1 Test 5E01: Changes of the surface insulation resistance
        caused by fluxes
   10.2 Test 5E02: Surface insulation resistance, assemblies
11 N Environmental test methods
   11.1 Test 5N01: Reflow solderability test for soldering joint
   11.2 Test 5N02: Resistance to reflow solderability of test board
   11.3 Test 5N03: Solderability test for test-board land
12 X Miscellaneous test methods
   12.1 Test 5X01: Liquid flux activity, wetting balance method
   12.2 Test 5X02: Paste flux viscosity - T-Bar spindle method
   12.3 Test 5X03: Spread test, liquid or extracted solder
         flux, solder paste and extracted cored wires or preforms
   12.4 Test 5X04: Solder paste viscosity - T-Bar spin
         spindle method (applicable to 300 Pa.s to 1,600 Pa.s)
   12.5 Test 5X05: Solder paste viscosity - T-Bar spindle
         method (applicable to Pa.s)
   12.6 Test 5X06: Solder paste viscosity - Spiral pump
         method (applicable to 300 Pa.s to 1,600 Pa.s)
   12.7 Test 5X07: Solder paste viscosity - Spiral pump
         method (applicable to Pa.s)
   12.8 Test 5X08: Solder paste - Slump test
   12.9 Test 5X09: Solder paste - Solder ball test
   12.10 Test 5X10: Solder paste - Tack test
   12.11 Test 5X11: Solder paste - Wetting test
   12.12 Test 5X12: Flux residues - Tackiness after drying
   12.13 Test 5X13: Spitting of flux-cored wire solder
   12.14 Test 5X14: Solder pool test
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Bibliography

Presents a catalogue of test methods representing methodologies and procedures that can be applied to test printed board assemblies.

DevelopmentNote
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
74
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
EN 61189-5 : 2006 Identical
IEC 61189-5:2006 Identical

HD 323.2.20 : 200S3 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 62137:2004/corrigendum:2005 ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
IEC 61190-1-2:2014 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
EN 61190-1-1:2002 Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly
IEC 61249-2-7:2002 Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
ISO 9455-2:1993 Soft soldering fluxes Test methods Part 2: Determination of non-volatile matter, ebulliometric method
IEC 61189-1:1997+AMD1:2001 CSV Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology
EN 61249-2-7:2002/corrigendum:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
IEC 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies
IEC 62137:2004 Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
ISO 9455-1:1990 Soft soldering fluxes — Test methods — Part 1: Determination of non-volatile matter, gravimetric method
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 61190-1-1:2002 Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly
IEC 61189-3:2007 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
EN 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 9001:2015 Quality management systems — Requirements
IPC 9201 : A SURFACE INSULATION RESISTANCE HANDBOOK
EN 61189-1 : 97 AMD 1 2001 TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY
EN 61190-1-3:2007/A1:2010 ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDER FOR ELECTRONIC SOLDERING APPLICATIONS
EN 29455-1:1993 Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:1990)
EN 61190-1-2:2014 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
IPC TR 467 : 0 SUPPORTING DATA AND NUMERICAL EXAMPLES FOR J-STD-001 (CONTROL OF FLUXES)
IEC 61190-1-3:2007+AMD1:2010 CSV Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
EN ISO 9455-2:1995 Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993)

View more information
US$114.01
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

or

Get in touch with us