• There are no items in your cart

I.S. EN ISO 17665-1:2006

Current
Current

The latest, up-to-date edition.

STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2006

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
   1.1 Inclusions
   1.2 Exclusions
2 Normative references
3 Terms and definitions
4 Quality management system elements
   4.1 Documentation
   4.2 Management responsibility
   4.3 Product realization
   4.4 Measurement, analysis and improvement - Control
        of non-conforming product
5 Sterilizing agent characterization
   5.1 Sterilizing agent
   5.2 Microbicidal effectiveness
   5.3 Materials effects
   5.4 Environmental consideration
6 Process and equipment characterization
   6.1 Process
        6.1.1 General
        6.1.2 Saturated steam processes
        6.1.3 Contained product processes
   6.2 Equipment
7 Product definition
8 Process definition
9 Validation
   9.1 General
   9.2 Installation qualification (IQ)
        9.2.1 Equipment
        9.2.2 Installation
        9.2.3 Function
   9.3 Operational qualification (OQ)
   9.4 Performance qualification (PQ)
   9.5 Review and approval of validation
10 Routine monitoring and control
11 Product release from sterilization
12 Maintaining process effectiveness
   12.1 Demonstration of continued effectiveness
   12.2 Recalibration
   12.3 Maintenance of equipment
   12.4 Requalification
   12.5 Assessment of change
Annex A (informative) Guidance
Annex B (informative) Process definition based on
        inactivation of the microbial population in
        its natural state (bioburden-based method)
Annex C (informative) Process definition based on the
        inactivation of a reference microorganism and
        a knowledge of bioburden on product items to
        be sterilized (combined bioburden/biological
        indicator based method)
Annex D (informative) Conservative process definition
        based on inactivation of reference microorganisms
        (overkill method)
Annex E (informative) Operating cycles
Bibliography
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directives 90/385/EEC, 93/42/EEC and 98/79/EEC

Specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices.

DevelopmentNote
Supersedes I.S. EN 554 (10/2006)
DocumentType
Standard
Pages
54
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

IEC 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
EN 12442-3 : 2000 ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE AGENTS
ISO 15883-1:2006 Washer-disinfectors Part 1: General requirements, terms and definitions and tests
ISO 11607-2:2006 Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes
ISO 11138-3:2017 Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes
ISO 15882:2008 Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
ISO 11737-2:2009 Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
ISO 11737-1:2006 Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products
EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
EN 868-4:2017 Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods
ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
EN 868-1 : 1997 PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED - GENERAL REQUIREMENTS AND TEST METHODS
ISO 14937:2009 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
ISO 11140-3:2007 Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test
ISO 22442-1:2015 Medical devices utilizing animal tissues and their derivatives Part 1: Application of risk management
EN 868-2:2017 Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
EN 868-3:2017 Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
ISO 11140-1:2014 Sterilization of health care products Chemical indicators Part 1: General requirements
ISO 18472:2006 Sterilization of health care products Biological and chemical indicators Test equipment
ISO 11140-4:2007 Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration
ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
ISO/TS 11139:2006 Sterilization of health care products Vocabulary
ISO 15883-4:2008 Washer-disinfectors Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes
ISO 10993-17:2002 Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
ISO 10993-1:2009 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process
ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
ISO 9001:2015 Quality management systems — Requirements
ISO 22442-2:2015 Medical devices utilizing animal tissues and their derivatives Part 2: Controls on sourcing, collection and handling
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 11140-5:2007 Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests
EN 12442-1 : 2000 ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 1: ANALYSIS AND MANAGEMENT OF RISK
ISO 11138-1:2017 Sterilization of health care products — Biological indicators — Part 1: General requirements
ISO 22442-3:2007 Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents
ISO 14971:2007 Medical devices Application of risk management to medical devices
ISO 11607-1:2006 Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems
ISO 14161:2009 Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results
ISO 14040:2006 Environmental management Life cycle assessment Principles and framework
ISO 15883-2:2006 Washer-disinfectors Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc.
ISO 17664:2017 Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices
EN 13060:2014 Small steam sterilizers
EN 12442-2 : 2000 ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING
ISO 9000-3:1997 Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software

View more information
US$89.89
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.