• There are no items in your cart

I.S. EN ISO/IEC 80079-38:2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
Available format(s)

Hardcopy , PDF

Superseded date

01-29-2020

Published date

01-16-2017

Preview

National Foreword
European foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Requirements for equipment (machines)
  and components
5 Additional requirements for specific equipment and
  components
6 Fire protection
7 Information for use
8 Marking
Annex A (informative) - Example of an ignition
        hazard assessment for a conveyor belt
        intended for use in a coal mine
Annex B (informative) - Example of an ignition hazard
        assessment for a shearer loader intended for use
        in a potentially explosive atmosphere of a coal mine
Annex C (normative) - Ignition sources
Annex D (informative) - Guidance on potential risks
        for converter-fed motors
Annex E (normative) - Tests for surface protective
        coating for group I hand tools of EPL Mb
Bibliography
Annex ZA (informative) - Relationship between this
          European Standard and the Essential
          Requirements of EU Directive 2014/34/EU
Annex ZB (informative) - Relationship between this
          European Standard and the Essential
          Requirements of EU Directive 2006/42/EC
Annex ZC (informative) - Significant technical changes
          between this document and the previous
          edition of this European Standard

Defines the explosion protection requirements for the design, construction, assessment and information for use (maintenance, repair, marking) of equipment that may be an individual item or form an assembly.

Committee
TC 305
DevelopmentNote
Supersedes I.S. EN 1710. (02/2017)
DocumentType
Standard
ISBN
978-2-8322-3180-7
Pages
132
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy

Standards Relationship
ISO/IEC 80079-38:2016 Identical
EN ISO/IEC 80079-38:2016 Identical

IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
EN 1676:2010 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
ISO 2592:2000 Determination of flash and fire points Cleveland open cup method
ISO 5598:2008 Fluid power systems and components Vocabulary
ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
EN 14973:2015 Conveyor belts for use in underground installations - Electrical and flammability safety requirements
IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
EN 12321:2003+A1:2009 Underground mining machinery - Specification for the safety requirements of armoured face conveyors
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
ISO 4589-2:1996 Plastics Determination of burning behaviour by oxygen index Part 2: Ambient-temperature test
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
IEC 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
IEC 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 281:2007 Rolling bearings Dynamic load ratings and rating life
IEC 60079-5:2015 RLV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
ISO 340:2013 Conveyor belts Laboratory scale flammability characteristics Requirements and test method
AS/NZS 3584.2:2008 Diesel engine systems for underground coal mines Explosion protected
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
ISO 14916:2017 Thermal spraying — Determination of tensile adhesive strength
ISO 284:2012 Conveyor belts — Electrical conductivity — Specification and test method
EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
IEC TS 60034-25:2014 Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
ISO 20823:2003 Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test
ISO 80079-37:2016 Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 1554:2012 Conveyor belts - Drum friction testing
IEC 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
ISO 8421-1:1987 Fire protection — Vocabulary — Part 1: General terms and phenomena of fire
ISO 2878:2017 Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance
IEC 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
CFR 30(PTS1-199) : JUL 2017 MINERAL RESOURCES - MINE SAFETY & HEALTH ADMINISTRATION, DEPARTMENT OF LABOUR
IEC 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
EN 12881-1:2014 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
ISO 2878:2011 Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance
EN 1552 : 2003 UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
ISO 630-5:2014 Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
ISO/TS 15029-2:2012 Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test Stabilized flame heat release method
EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
ISO 14935:1998 Petroleum and related products Determination of wick flame persistence of fire-resistant fluids
ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
ISO 15029-1:1999 Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 1: Spray flame persistence Hollow-cone nozzle method
AS/NZS 3584.3:2012 Diesel engine systems for underground coal mines Maintenance
EN 12163:2016 Copper and copper alloys - Rod for general purposes
ISO 7745:2010 Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use
CLC/TR 50404:2003 Electrostatics - Code of practice for the avoidance of hazards due to static electricity
IEC 60079-18:2014 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES

View more information
US$83.31
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.