• ICC 2012 INTERNATIONAL RESI. CODE : 2012

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS

    Available format(s):  Hardcopy, PDF

    Superseded date:  07-30-2020

    Language(s):  English

    Published date:  01-01-2012

    Publisher:  International Code Council (ICC)

    Add to Watchlist

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Part I - Administrative
    CHAPTER 1 - SCOPE AND ADMINISTRATION
    PART 1 - SCOPE AND APPLICATION
    PART 2-ADMINISTRATION AND ENFORCEMENT
    Part II - Definitions
    CHAPTER 2 - DEFINITIONS
    Part III - Building Planning and Construction
    CHAPTER 3 - BUILDING PLANNING
    CHAPTER 4 - FOUNDATIONS
    CHAPTER 5 - FLOORS
    CHAPTER 6 - WALL CONSTRUCTION
    CHAPTER 7 - WALL COVERING
    CHAPTER 8 - ROOF-CEILING CONSTRUCTION
    CHAPTER 9 - ROOF ASSEMBLIES
    CHAPTER 10 - CHIMNEYS AND FIREPLACES
    Part IV - Energy Conservation
    CHAPTER 11 - ENERGY EFFICIENCY
    Part V - Mechanical
    CHAPTER 12 - MECHANICAL ADMINISTRATION
    CHAPTER 13 - GENERAL MECHANICAL SYSTEM REQUIREMENTS
    CHAPTER 14 - HEATING AND COOLING EQUIPMENT AND APPLIANCES
    CHAPTER 15 - EXHAUST SYSTEMS
    CHAPTER 16 - DUCT SYSTEMS
    CHAPTER 17 - COMBUSTION AIR
    CHAPTER 18 - CHIMNEYS AND VENTS
    CHAPTER 19 - SPECIAL APPLIANCES, EQUIPMENT AND SYSTEMS
    CHAPTER 20 - BOILERS AND WATER HEATERS
    CHAPTER 21 - HYDRONIC PIPING
    CHAPTER 22 - SPECIAL PIPING AND STORAGE SYSTEMS
    CHAPTER 23 - SOLAR ENERGY SYSTEMS
    Part VI - Fuel Gas
    CHAPTER 24 - FUEL GAS
    Part VII - Plumbing
    CHAPTER 25 - PLUMBING ADMINISTRATION
    CHAPTER 26 - GENERAL PLUMBING REQUIREMENTS
    CHAPTER 27 - PLUMBING FIXTURES
    CHAPTER 28 - WATER HEATERS
    CHAPTER 29 - WATER SUPPLY AND DISTRIBUTION
    CHAPTER 30 - SANITARY DRAINAGE
    CHAPTER 31 - VENTS
    CHAPTER 32 - TRAPS
    CHAPTER 33 - STORM DRAINAGE
    Part VIII - Electrical
    CHAPTER 34 - GENERAL REQUIREMENTS
    CHAPTER 35 - ELECTRICAL DEFINITIONS
    CHAPTER 36 - SERVICES
    CHAPTER 37 - BRANCH CIRCUIT AND FEEDER REQUIREMENTS
    CHAPTER 38 - WIRING METHODS
    CHAPTER 39 - POWER AND LIGHTING DISTRIBUTION
    CHAPTER 40 - DEVICES AND LUMINAIRES
    CHAPTER 41 - APPLIANCE INSTALLATION
    CHAPTER 42 - SWIMMING POOLS
    CHAPTER 43 - CLASS 2 REMOTE-CONTROL, SIGNALING AND
                 POWER-LIMITED CIRCUITS
    Part IX - Referenced Standards
    CHAPTER 44 - REFERENCED STANDARDS
    APPENDIX A - SIZING AND CAPACITIES OF GAS PIPING
    APPENDIX B - SIZING OF VENTING SYSTEMS SERVING
                 APPLIANCES EQUIPPED WITH DRAFT HOODS, CATEGORY
                 I APPLIANCES, AND APPLIANCES LISTED FOR USE WITH
                 TYPE B VENTS
    APPENDIX C - EXIT TERMINALS OF MECHANICAL DRAFT AND
                 DIRECT-VENT VENTING SYSTEMS
    APPENDIX D - RECOMMENDED PROCEDURE FOR SAFETY
                 INSPECTION OF AN EXISTING APPLIANCE INSTALLATION
    APPENDIX E - MANUFACTURED HOUSING USED AS DWELLINGS
    APPENDIX F - RADON CONTROL METHODS
    APPENDIX G - SWIMMING POOLS, SPAS AND HOT TUBS
    APPENDIX H - PATIO COVERS
    APPENDIX I - PRIVATE SEWAGE DISPOSAL
    APPENDIX J - EXISTING BUILDINGS AND STRUCTURES
    APPENDIX K - SOUND TRANSMISSION
    APPENDIX L - PERMIT FEES
    APPENDIX M - HOME DAY CARE - R-3 OCCUPANCY
    APPENDIX N - VENTING METHODS
    APPENDIX O - AUTOMATIC VEHICULAR GATES
    APPENDIX P - SIZING OF WATER PIPING SYSTEM
    APPENDIX Q - ICC INTERNATIONAL RESIDENTIAL CODE
                 ELECTRICAL PROVISIONS/NATIONAL ELECTRICAL CODE
                 CROSS REFERENCE
    INDEX

    Abstract - (Show below) - (Hide below)

    Applies to the construction, alteration, movement, enlargement, replacement, repair, equipment, use and occupancy, location, removal and demolition of detached one- and two-family dwellings and townhouses not more than three stories above grade plane in height with a separate means of egress and their accessory structures.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher International Code Council (ICC)
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    NEMA SB 11 : 2011 GUIDE FOR PROPER USE OF SYSTEM SMOKE DETECTORS
    ICC 2012 INT. PROPERTY MAINT. CODE : 2012 INTERNATIONAL PROPERTY MAINTENANCE CODE
    NASA SSTD 8070 0115 : 2012 OFFICE TRAILER TIE-DOWNS, BLOCKING AND ELECTRICAL CONNECTIONS
    ACI 560R : 2016 REPORT ON DESIGN AND CONSTRUCTION WITH INSULATING CONCRETE FORMS (ICFS)
    ICC 2012 INTERNATIONAL FIRE CODE : 2012 INTERNATIONAL FIRE CODE
    ICC 2012 INT. EXIST. BUILDING CODE : 2012 INTERNATIONAL EXISTING BUILDING CODE
    ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 INTERNATIONAL FUEL GAS CODE
    ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC)
    ICC 2012 INT. ENERGY CONSV. CODE : 2012 INTERNATIONAL ENERGY CONSERVATION CODE
    ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
    ICC 2012 INTERNATIONAL MECH. CODE : 2012 INTERNATIONAL MECHANICAL CODE
    ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION

    Standards Referencing This Book - (Show below) - (Hide below)

    ASSE 1050 : 2009 PERFORMANCE REQUIREMENTS FOR STACK AIR ADMITTANCE VALVES FOR SANITARY DRAINAGE SYSTEMS
    ASSE 1001 : 2017 PERFORMANCE REQUIREMENTS FOR ATMOSPHERIC TYPE VACUUM BREAKERS
    UL 181B : 3 CLOSURE SYSTEMS FOR USE WITH FLEXIBLE AIR DUCTS AND AIR CONNECTORS
    ASTM E 970 : 2017 : REDLINE Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
    FM 4450 : 1989 CLASS 1 INSULATED STEEL DECK ROOFS
    ASTM D 4434/D4434M : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
    ASTM D 422 : 1963 : R2002 : EDT 1 Standard Test Method for Particle-Size Analysis of Soils
    ASTM E 96/E96M : 2016 : REDLINE Standard Test Methods for Water Vapor Transmission of Materials
    ANSI Z21.84 : 2012 MANUALLY LIGHTED, NATURAL GAS, DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING APPLIANCES
    ASSE 1002-2015/ ASME A112.1002-2015/ CSA B125.12 : 2015 ANTI-SIPHON FILL VALVES FOR WATER CLOSET TANKS
    UL 103 : 2011 FACTORY-BUILT CHIMNEYS FOR RESIDENTIAL TYPE AND BUILDING HEATING APPLIANCES
    ANSI Z21.75 : 2016 CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES
    ASTM C 1278/C1278M : 2017 : REDLINE Standard Specification for Fiber-Reinforced Gypsum Panel
    AITC A190.1 : 2007 AMERICAN NATIONAL STANDARD, STRUCTURAL GLUED LAMINATED TIMBER
    ANSI Z124.4 : 2006 PLASTIC WATER CLOSET BOWLS AND TANKS
    CSA B64.7 : 2011 VACUUM BREAKERS, LABORATORY FAUCET TYPE (LFVB)
    ASSE 1003 : 2009 PERFORMANCE REQUIREMENTS FOR WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER DISTRIBUTION SYSTEMS
    ASTM D 3034 : 2016 : REDLINE Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    ASTM F 876 : 2017 : REDLINE SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING
    CSA B45.2 : 2013 ENAMELLED CAST IRON AND ENAMELLED STEEL PLUMBING FIXTURES
    AWWA C153/A21.53 : 2011 DUCTILE-IRON COMPACT FITTINGS
    ASME B16.23 : 2016 CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV
    ANSI Z21.10.1 : 2014 GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS
    ANSI Z21.58 : 2015 OUTDOOR COOKING GAS APPLIANCES
    NSF 61 : 2016 DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS
    ASTM D 2467 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
    ASTM A 615/A615M : 2016-03 SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT
    UL 1453 : 6 ELECTRIC BOOSTER AND COMMERCIAL STORAGE TANK WATER HEATERS
    UL 896 : 5 OIL-BURNING STOVES
    ASTM D 1863 : 2005 Standard Specification for Mineral Aggregate Used on Built-Up Roofs
    CSA 4.9 : 2014 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
    ANSI Z97.1 : 2015 SAFETY GLAZING MATERIALS USED IN BUILDINGS - SAFETY PERFORMANCE SPECIFICATIONS AND METHODS OF TEST
    UL 732 : 5 OIL-FIRED STORAGE TANK WATER HEATERS
    ANSI Z21.13 : 2014 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
    ASTM B 306 : 2013 : REDLINE Standard Specification for Copper Drainage Tube (DWV)
    NFPA 31 : 2016 INSTALLATION OF OIL-BURNING EQUIPMENT
    ASTM F 1412 : 2016 : REDLINE Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
    APSP 6 : 2013 RESIDENTIAL PORTABLE SPAS AND SWIM SPAS
    UL 858 : 2016 HOUSEHOLD ELECTRIC RANGES
    ASTM F 439 : 2013 : REDLINE Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    CSA B125.3 : 2012 PLUMBING FITTINGS
    NFPA 58 : 2017 LIQUEFIED PETROLEUM GAS CODE
    CSA B64.1.3 : 2004 VACUUM BREAKERS, SPILL-RESISTANT PRESSURE TYPE (SRPVB)
    ASTM D 4601 : 2004 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
    UL 1703 : 3 FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS
    NFPA 259 : 2013 STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS
    ASTM C 1460 : 2012-12 SPECIFICATION FOR SHIELDED TRANSITION COUPLINGS FOR USE WITH DISSIMILAR DWV PIPE AND FITTINGS ABOVE GROUND
    CSA B137.2 : 2009 GEN INS 1 11 POLYVINYLCHLORIDE (PVC) INJECTION-MOULDED GASKETED FITTINGS FOR PRESSURE APPLICATIONS
    ANSI Z21.11.2 : 2013 GAS-FIRED ROOM HEATERS, VOLUME II, UNVENTED ROOM HEATERS
    ASTM D 3468 : 1999 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
    ICC 500 : 2008 STANDARD FOR THE DESIGN AND CONSTRUCTION OF STORM SHELTERS
    ASTM D 2178 : 2004 Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing (Withdrawn 2013)
    CSA B137.3 : 2009 GEN INS 1 11 RIGID POLYVINYLCHLORIDE (PVC) PIPE AND FITTINGS FOR PRESSURE APPLICATIONS
    ASTM C 62 : 2017 : REDLINE Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
    ASSE 1010 : 2004 PERFORMANCE REQUIREMENTS FOR WATER HAMMER ARRESTERS
    NFPA 853 : 2010 INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS
    ISO 15874-3:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
    CSA B64.4 : 2011 BACKFLOW PREVENTERS, REDUCED PRESSURE PRINCIPLE TYPE (RP)
    ASTM F 493 : 2014 : REDLINE Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
    NSF 42 : 2016 DRINKING WATER TREATMENT UNITS - AESTHETIC EFFECTS
    NSF 14 : 2016 PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS
    ASTM F 438 : 2017 : REDLINE Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
    ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
    ASTM C 475/C475M : 2017 : REDLINE Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
    ASSE 1015 : 2011 PERFORMANCE REQUIREMENTS FOR DOUBLE CHECK BACKFLOW PREVENTION ASSEMBLIES AND DOUBLE CHECK FIRE PROTECTION BACKFLOW PREVENTION ASSEMBLIES
    ASTM F 409 : 2017 : REDLINE Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
    ASME A112.6.3 : 2016 FLOOR AND TRENCH DRAINS
    ASTM F 891 : 2016 : REDLINE Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
    ASTM C 897 : 2015 : REDLINE Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
    ASME A112.18.2 : 2015 PLUMBING WASTE FITTINGS
    ANSI Z21.22 : 2015 RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS
    ACI 318 : 2014 BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY
    ASTM E 1996 : 2017 : REDLINE Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
    ASTM D 3909 : 1997 : REV B : R2004 : EDT 1 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
    CSA 4.7 : 2014 GAS-FIRED POOL HEATERS
    ANSI Z21.40.1 : 1996 GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES
    CSA B64.3 : 2011 BACKFLOW PREVENTERS, DUAL CHECK VALVE TYPE WITH ATMOSPHERIC PORT (DCAP)
    ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
    NSF 58 : 2016 REVERSE OSMOSIS DRINKING WATER TREATMENT SYSTEMS
    ANSI/AWWA C115/A21.15 : 2011 FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES
    CSA B602 : 2016 MECHANICAL COUPLINGS FOR DRAIN, WASTE, AND VENT PIPE AND SEWER PIPE
    CSA B64.2.1 : 2011 VACUUM BREAKERS, HOSE CONNECTION TYPE (HCVB) WITH MANUAL DRAINING FEATURE
    UL 1741 : ED2 2010-01 INVERTERS, CONVERTERS, CONTROLLERS AND INTERCONNECTION SYSTEM EQUIPMENT FOR USE WITH DISTRIBUTED ENERGY RESOURCES
    ASTM F 441/F441M : 2015 : REDLINE Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
    ASTM C 91 : 2005 Standard Specification for Masonry Cement
    CSA B45.9 : 2013 PLUMBING FIXTURES WITH PUMPED WASTE AND MACERATING TOILET SYSTEMS
    ASTM A 706/A706M : 2016 : REDLINE Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
    ASME B16.15 : 2013 CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250
    ASME A112.18.6-2017/CSA B125.6-17 Flexible water connectors
    ASTM F 2623 : 2015-01 SPECIFICATION FOR POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) SDR 9 TUBING
    ASTM D 2626 : 2004 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
    ASME B16.29 : 2012 WROUGHT COPPER AND WROUGHT COPPER ALLOY SOLDER-JOINT DRAINAGE FITTINGS - DWV
    ASTM D 227 : 2003 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
    ASTM D 5664 : 2017 : REDLINE Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
    UL 1261 : 6 ELECTRIC WATER HEATERS FOR POOLS AND TUBS
    NSF 53 : 2016 DRINKING WATER TREATMENT UNITS - HEALTH EFFECTS
    ANSI Z21.10.3 : 2015 GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS
    ASSE 1012 : 2009 PERFORMANCE REQUIREMENTS FOR BACKFLOW PREVENTER WITH INTERMEDIATE ATMOSPHERIC VENT
    CSA B125.2 : 2015 PLUMBING WASTE FITTINGS
    ASTM C 129 : 2017 : REDLINE Standard Specification for Nonloadbearing Concrete Masonry Units
    ASTM C 4 : 2004 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
    UL 875 : 9 ELECTRIC DRY-BATH HEATERS
    AHA A135.4 : 2012 BASIC HARDBOARD
    CSA 4.3 : 2014 GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS
    UL 1042 : 5 ELECTRIC BASEBOARD HEATING EQUIPMENT
    CSA O437 SERIES : 1993 STANDARDS ON OSB AND WAFERBOARD
    ASCE 5-11/6-11 : 2011 BUILDING CODE REQUIREMENTS AND SPECIFICATION FOR MASONRY STRUCTURES AND RELATED COMMENTARIES
    CGSB 37-GP-56M : 80 AMD 1 85 MEMBRANE, MODIFIED, BITUMINOUS, PREFABRICATED, AND REINFORCED FOR ROOFING
    UL 343 : 9 PUMPS FOR OIL-BURNING APPLIANCES
    ASTM D 1623 : 2017 : REDLINE Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
    ASTM B 101 : 2012 : REDLINE Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
    CSA O325 : 2016 CONSTRUCTION SHEATHING
    AWWA C904 : 2016 CROSSLINKED POLYETHYLENE (PEX) PRESSURE TUBING, 1/2 IN. (13 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE
    ASTM A 875/A875M : 2013 : REDLINE Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
    AWWA C104/A21.4 : 2016 CEMENT - MORTAR LINING FOR DUCTILE-IRON PIPE AND FITTINGS EFFECTIVE
    ASTM C 844 : 2015 : REDLINE Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
    CGSB 37-GP-52M : 1984 ROOFING AND WATERPROOFING MEMBRANE, SHEET APPLIED, ELASTOMERIC
    ASSE 1011 : 2004 ERRATA 2004 PERFORMANCE REQUIREMENTS FOR HOSE CONNECTION VACUUM BREAKERS
    CSA B64.1.1 : 2011 VACUUM BREAKERS, ATMOSPHERIC TYPE (AVB)
    ISO 15874-1:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
    UL 795 : 8 COMMERCIAL-INDUSTRIAL GAS HEATING EQUIPMENT
    UL 2017 : 2 GENERAL-PURPOSE SIGNALING DEVICES AND SYSTEMS
    ASME A112.4.2 : 2015 PERSONAL HYGIENE DEVICES FOR WATER CLOSETS
    NSF 44 : 2016 RESIDENTIAL CATION EXCHANGE WATER SOFTENERS
    AWWA C151/A21.51 : 2017 DUCTILE-IRON PIPE, CENTRIFUGALLY CAST
    NFPA 501 : 2017 MANUFACTURED HOUSING
    UL 730 : 5 OIL-FIRED WALL FURNACES
    ASTM D 2464 : 2015 : REDLINE Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
    ASTM C 645 : 2014-11 SPECIFICATION FOR NONSTRUCTURAL STEEL FRAMING MEMBERS
    UL 737 : 2010 FIREPLACE STOVES
    CSA B181.3 : 2011 GEN INS 1 11 POLYOLEFIN AND POLYVINYLIDENE FLUORIDE (PVDF) LABORATORY DRAINAGE SYSTEMS
    ASTM C 1283 : 2015 : REDLINE Standard Practice for Installing Clay Flue Lining
    ASTM D 1527 : 1999 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
    ASTM D 3311 : 2017 : REDLINE Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
    CFR 16(PTS1000-END) : 0 COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION
    ASTM C 1288 : 2017 : REDLINE Standard Specification for Fiber-Cement Interior Substrate Sheets
    ANSI Z124.1 : 1995 PLASTIC BATHTUB UNITS
    ASTM E 2570 : 2007 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
    ASSE 1037 : 2015 PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES
    ASTM F 1282 : 2017 : REDLINE Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
    ASTM F 477 : 2014 : REDLINE Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
    ASTM E 2634 : 2017-06 SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS
    ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC)
    ASTM C 843 : 2017 : REDLINE Standard Specification for Application of Gypsum Veneer Plaster
    UL 17 : 4 VENT OR CHIMNEY CONNECTOR DAMPERS FOR OIL-FIRED APPLIANCES
    ASTM C 564 : 2014 : REDLINE Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
    ASTM E 108 : 2017 : REDLINE Standard Test Methods for Fire Tests of Roof Coverings
    ICC 2012 INTERNATIONAL MECH. CODE : 2012 INTERNATIONAL MECHANICAL CODE
    ASTM C 1328 : 2005 Standard Specification for Plastic (Stucco) Cement
    ASTM C 1029 : 2015 : REDLINE Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
    CSA B64.5.1 : 2011 BACKFLOW PREVENTERS, DOUBLE CHECK VALVE TYPE FOR FIRE SYSTEMS (DCVAF)
    ASME A112.19.9M : 1991R2008 NON-VITREOUS CERAMIC PLUMBING FIXTURES
    CFR 49(PTS186-199) : 0 TRANSPORTATION
    UL 378 : 4 DRAFT EQUIPMENT
    NFPA 275 : 2017 STANDARD METHOD OF FIRE TESTS FOR THE EVALUATION OF THERMAL BARRIERS
    ANSI Z124.2 : 1995 PLASTIC SHOWER RECEPTORS & SHOWER STALLS
    UL 1040 : 1 FIRE TEST OF INSULATED WALL CONSTRUCTION
    ASME B16.28 : 1994 WROUGHT STEEL BUTT-WELDING SHORT RADIUS ELBOWS AND RETURNS
    ACI 530/530.1R : 2013 BUILDING CODE REQUIREMENTS AND SPECIFICATION FOR MASONRY STRUCTURES AND COMPANION COMMENTARIES
    UL 2034 : 4 SINGLE AND MULTIPLE STATION CARBON MONOXIDE ALARMS
    UL 217 : 8 SMOKE ALARMS
    CSA B137.1 : 2009 GEN INS 1 11 POLYETHYLENE (PE) PIPE, TUBING, AND FITTINGS FOR COLD-WATER PRESSURE SERVICES
    CSA 7.1 : 2016 GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS
    ASME B16.4 : 2016 GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250
    ASME A112.19.2 : 2013 CERAMIC PLUMBING FIXTURES
    ASTM D 2855 : 2015 : REDLINE Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
    ULC S102 : 7ED 2010 STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES
    ASTM D 3309 : 1996 : REV A : R2002 Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010)
    CSA B64.1.2 : 2011 VACUUM BREAKERS, PRESSURE TYPE (PVB)
    AHA A135.6 : 2012 ENGINEERED WOOD SIDING
    ASHRAE HDBK FUNDAMENTALS : 2013 ASHRAE HANDBOOK - FUNDAMENTALS
    CSA 6.27 : 2016 CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES
    CFR 16(PTS0-999) : 0 COMMERCIAL PRACTICES
    ASTM C 1396/C1396M : 2017 : REDLINE Standard Specification for Gypsum Board
    UL 1693 : 3 ELECTRIC RADIANT HEATING PANELS AND HEATING PANEL SETS
    UL 842 : 2010 VALVES FOR FLAMMABLE FLUIDS
    ASTM A 254 : 1997 Standard Specification for Copper-Brazed Steel Tubing
    ANSI Z83.20 : 2016 GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS
    ANSI Z21.50 : 2016 VENTED DECORATIVE GAS APPLIANCES
    ANSI A137.1 : 2012(R2013) SPECIFICATIONS FOR CERAMIC TILE
    ASTM D 5665 : 1999 : REV A : R2006 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
    UL 723 : 2010 TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS
    ISO 15874-2:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
    UL 508 : 1999 INDUSTRIAL CONTROL EQUIPMENT
    UL 2075 : 2 GAS AND VAPOR DETECTORS AND SENSORS
    UL 651 : 8 SCHEDULE 40, 80, TYPE EB AND A RIGID PVC CONDUIT AND FITTINGS
    ASME A17.1-2016/CSA B44-16 Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
    ASSE 1062 : 2006 TEMPERATURE ACTUATED FLOW REDUCTION (TAFR) VALVES FOR INDIVIDUAL FIXTURE FITTINGS
    CSA B45.1 : 2013 CERAMIC PLUMBING FIXTURES
    ICC A117.1 : 2009 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES
    AWS A5.8/A5.8M : 2013 SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING
    ASTM A 74 : 2017 : REDLINE Standard Specification for Cast Iron Soil Pipe and Fittings
    ASTM C 27 : 1998 Standard Classification of Fireclay and High-Alumina Refractory Brick
    CSA/ANSI Z21.42:13 (R2018) Gas-fired illuminating appliances
    AWWA C511 : 2007 REDUCED-PRESSURE PRINCIPLE BACKFLOW PREVENTION ASSEMBLY
    UL 1618 : 2015 WALL PROTECTORS, FLOOR PROTECTORS, AND HEARTH EXTENSIONS
    ASTM D 2672 : 2014 : REDLINE Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
    CSA 2.22 : 2016 VENTED DECORATIVE GAS APPLIANCES
    ASME CSD1 : 2012 CONTROLS AND SAFETY DEVICES FOR AUTOMATICALLY FIRED BOILERS
    UL 181 : 2011 FACTORY-MADE AIR DUCTS AND AIR CONNECTORS
    ASTM A 463/A463M : 2015 : REDLINE Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
    ASTM D 2683 : 2014 : REDLINE Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
    ASTM D 4829 : 2011 : REDLINE Standard Test Method for Expansion Index of Soils
    ASSE 1051 : 2009 PERFORMANCE REQUIREMENTS FOR INDIVIDUAL AND BRANCH TYPE AIR ADMITTANCE VALVES FOR SANITARY DRAINAGE SYSTEMS
    ICC 600 : 2008 STANDARD FOR RESIDENTIAL CONSTRUCTION IN HIGH-WIND REGIONS
    ICC 2012 INTERNATIONAL FIRE CODE : 2012 INTERNATIONAL FIRE CODE
    UL 959 : 9 MEDIUM HEAT APPLIANCE FACTORY-BUILT CHIMNEYS
    ASTM D 2104 : 2003 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)
    APSP 4 : 2013 ABOVEGROUND/ONGROUND RESIDENTIAL SWIMMING POOLS
    ASTM E 331 : 2000 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
    ASTM D 2513 : 2017-01 SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS
    ASTM D 4068 : 2017 : REDLINE Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
    ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    ASTM F 714 : 2013 : REDLINE Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
    UL 80 : 2012 STEEL TANKS FOR OIL-BURNER FUELS AND OTHER COMBUSTIBLE LIQUIDS
    ASCE 24 05 : 2006 FLOOD RESISTANT DESIGN AND CONSTRUCTION
    ASTM F 1281 : 2017 : REDLINE Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
    UL 1673 : 3 ELECTRIC SPACE HEATING CABLES
    ASTM D 7032 : 2017 : REDLINE Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
    UL 790 : 8 STANDARD TEST METHODS FOR FIRE TESTS OF ROOF COVERINGS
    ANSI Z21.47 : 2016 GAS-FIRED CENTRAL FURNACES
    UL 1996 : 4 ELECTRIC DUCT HEATERS
    ASTM B 370 : 2012 : REDLINE Standard Specification for Copper Sheet and Strip for Building Construction
    ASTM B 88 : 2016 : REDLINE Standard Specification for Seamless Copper Water Tube
    ASTM C 55 : 2017 : REDLINE Standard Specification for Concrete Building Brick
    ASTM B 447 : 2012 : REV A : REDLINE Standard Specification for Welded Copper Tube
    ACI 332 : 2014 RESIDENTIAL CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY
    CGSB 37.54 : 1995 POLYVINYL CHLORIDE ROOFING AND WATERPROOFING MEMBRANE
    CSA 4.1 : 2014 GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS
    UL 127 : 9 FACTORY-BUILT FIREPLACES
    AAMA 711 : 2013 VOLUNTARY SPECIFICATION FOR SELF ADHERING FLASHING USED FOR INSTALLATION OF EXTERIOR WALL FENESTRATION PRODUCTS
    ASTM C 34 : 2017 : REDLINE Standard Specification for Structural Clay Loadbearing Wall Tile
    UL 441 : 2016 GAS VENTS
    ICC 400 : 2007 STANDARD ON THE DESIGN AND CONSTRUCTION OF LOG STRUCTURES
    ASCE 7 10 : 2010 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
    ASTM F 2200 : 2017 : REDLINE Standard Specification for Automated Vehicular Gate Construction
    AAMA 506 : 2016 VOLUNTARY SPECIFICATIONS FOR IMPACT AND CYCLE TESTING OF FENESTRATION PRODUCTS
    AWWA C901 : 2017 POLYETHYLENE (PE) PRESSURE PIPE AND TUBING, 3/4 IN. (19 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE
    ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
    ANSI Z21.97 : 2014 OUTDOOR DECORATIVE GAS APPLIANCES
    ANSI Z21.88 : 2016 VENTED GAS FIREPLACE HEATERS
    ASTM D 2466 : 2017 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
    CSA B182.8 : 2011 GEN INS 1 11 PROFILE POLYETHYLENE (PE) STORM SEWER AND DRAINAGE PIPE AND FITTINGS
    UL 1026 : 6 HOUSEHOLD ELECTRIC COOKING AND FOOD SERVING APPLIANCES
    ASME B16.18 : 2012 Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)
    CSA B137.11 : 2009 GEN INS 1 11 POLYPROPYLENE (PP-R) PIPE AND FITTINGS FOR PRESSURE APPLICATIONS
    NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
    ASTM C 476 : 2016-07 SPECIFICATION FOR GROUT FOR MASONRY
    ANSI A108/A118/A136.1 : 2017 AMERICAN NATIONAL SPECIFICATIONS FOR THE INSTALLATION OF CERAMIC TILE
    ASTM A 539 : 1999 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004)
    UL 325 : 7ED 2017-05 DOOR, DRAPERY, GATE, LOUVER, AND WINDOW OPERATORS AND SYSTEMS
    ASHRAE 15 AND 34 PACKAGE : 2016 ASHRAE 15: SAFETY STANDARD FOR REFRIGERATION SYSTEMS - ASHRAE 34: DESIGNATION AND SAFETY CLASSIFICATION OF REFRIGERANTS
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    AWWA C110/A21.10 : 2012 DUCTILE-IRON AND GRAY-IRON FITTINGS
    ASME A112.19.3/CSA B45.4 : 2017 STAINLESS STEEL PLUMBING FIXTURES
    ASSE 1023 : 1979 HOT WATER DISPENSERS HOUSEHOLD STORAGE TYPE - ELECTRICAL
    ASTM D 2241 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
    ASTM D 2468 : 1996 : REV A Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003)
    ASTM A 951 : 2002 Standard Specification for Masonry Joint Reinforcement
    ASTM A 996/A996M : 2016 : REDLINE Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
    UL 1738 : 3 VENTING SYSTEMS FOR GAS-BURNING APPLIANCES, CATEGORIES 2, 3, AND 4
    ASTM D 2751 : 2005 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014)
    CSA 2.26 : 2012 DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES
    ASTM C 199 : 1984 TEST METHOD FOR PIER TEST FOR REFRACTORY MORTARS
    ASTM B 828 : 2016 : REDLINE Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
    ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    ASTM D 4897 : 2001 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
    ASSE 1052 : 1993 PERFORMANCE REQUIREMENTS FOR HOSE CONNECTION BACKFLOW PREVENTERS
    UL 729 : 6 OIL-FIRED FLOOR FURNACES
    ASTM D 2126 : 2015 : REDLINE Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
    ASTM B 227 : 2015 : REDLINE Standard Specification for Hard-Drawn Copper-Clad Steel Wire
    NFPA 72 : 2016 NATIONAL FIRE ALARM AND SIGNALING CODE
    ASME CODE CASE B & PV : 2017 CODE CASES: BOILERS AND PRESSURE VESSELS
    NFPA 13 : 2016 INSTALLATION OF SPRINKLER SYSTEMS
    ASTM C 1325 : 2017-02 SPECIFICATION FOR NON-ASBESTOS FIBER-MAT REINFORCED CEMENTITIOUS BACKER UNITS
    CSA B137.9 : 2009 GEN INS 1 11 POLYETHYLENE/ALUMINUM/POLYETHYLENE (PE-AL-PE) COMPOSITE PRESSURE-PIPE SYSTEMS
    AWWA C510 : 2007 DOUBLE CHECK-VALVE BACKFLOW PREVENTION ASSEMBLY
    ASSE 1024 : 2004 PERFORMANCE REQUIREMENTS FOR DUAL CHECK BACKFLOW PREVENTERS
    ASTM D 2665 : 2014 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
    UL 2158A : 3 CLOTHES DRYER TRANSITION DUCT
    ASME B16.26 : 2013 CAST COPPER ALLOY FITTINGS FOR FLARED COPPER TUBES
    CSA B64.2.2 : 2011 VACUUM BREAKERS, HOSE CONNECTION TYPE (HCVB) WITH AUTOMATIC DRAINING FEATURE
    ASTM F 1055 : 2016-09 SPECIFICATION FOR ELECTROFUSION TYPE POLYETHYLENE FITTINGS FOR OUTSIDE DIAMETER CONTROLLED POLYETHYLENE AND CROSSLINKED POLYETHYLENE (PEX) PIPE AND TUBING
    ASME A112.19.12 : 2014 WALL MOUNTED, PEDESTAL MOUNTED, ADJUSTABLE, ELEVATING, TILTING, AND PIVOTING LAVATORY, SINK, AND SHAMPOO BOWL CARRIER SYSTEMS AND DRAIN WASTE SYSTEMS
    ASTM B 43 : 2015 : REDLINE Standard Specification for Seamless Red Brass Pipe, Standard Sizes
    CSA B181.2 : 2011 GEN INS 1 11 POLYVINYLCHLORIDE (PVC) AND CHLORINATED POLYVINYLCHLORIDE (CPVC) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS
    ANSI Z21.91 : 2007 VENTLESS FIREBOX ENCLOSURES FOR GAS-FIRED UNVENTED DECORATIVE ROOM HEATERS
    ASTM D 3679 : 2017 : REDLINE Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
    ANSI Z21.56 : 2014 GAS-FIRED POOL HEATERS
    ANSI Z21.60 : 2012 DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES
    APSP 5 : 2011 RESIDENTIAL INGROUND SWIMMING POOLS
    ASSE 1047 : 2011 PERFORMANCE REQUIREMENTS FOR REDUCED PRESSURE DETECTOR FIRE PROTECTION BACKFLOW PREVENTION ASSEMBLIES
    ASSE 1056 : 2013 PERFORMANCE REQUIREMENTS FOR SPILL RESISTANT VACUUM BREAKER ASSEMBLIES
    NFPA 286 : 2015 STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH
    AHA A208.1 : 2016 PARTICLEBOARD STANDARD
    ASTM A 1003/A1003M : 2015 : REDLINE Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
    ANSI Z124.3 : 2005 PLASTIC LAVATORIES
    ASME A18.1 : 2017 SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS
    ASTM C 73 : 2017 : REDLINE Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
    ASTM D 2823 : 2005 Standard Specification for Asphalt Roof Coatings, Asbestos Containing
    UL 641 : 8 Standard for Type L Low-Temperature Venting Systems
    UL 536 : 2010 FLEXIBLE METALLIC HOSE
    ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
    ICC 2012 INT. PVT. SEWAGE DISP.CODE : 2012 INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE
    ASTM D 3350 : 2014 : REDLINE Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
    CSA B181.1 : 2011 GEN INS 1 11 ACRYLONITRILE-BUTADIENE-STYRENE (ABS) DRAIN, WASTE, AND VENT PIPE AND PIPE FITTINGS
    CSA 6.26 : 2016 FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING
    CSA B182.4 : 2011 GEN INS 1 11 PROFILE POLYVINYLCHLORIDE (PVC) SEWER PIPE AND FITTINGS
    ANSI Z21.86-2016/CSA 2.32-2016 Vented gas-fired space heating appliances
    ASTM D 41 : 2005 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
    NFPA 82 : 2014 INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT
    UL 1256 : 4 FIRE TEST OF ROOF DECK CONSTRUCTIONS
    ASSE 1019 : 2011(R2016) PERFORMANCE REQUIREMENTS FOR WALL HYDRANT WITH BACKFLOW PROTECTION AND FREEZE RESISTANCE
    ASTM D 1621 : 2016 : REDLINE Standard Test Method for Compressive Properties of Rigid Cellular Plastics
    ASME B16.3 : 2016 MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300
    ASTM B 813 : 2016 : REDLINE Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
    ASTM F 656 : 2015 : REDLINE Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
    ANSI Z21.1 : 2016 HOUSEHOLD COOKING GAS APPLIANCES
    NFPA 720 : 2015 INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT
    ASSE 1035 : 2008 ERRATA 2008 PERFORMANCE REQUIREMENTS FOR LABORATORY FAUCET BACKFLOW PREVENTERS
    UL 1995 : 5 HEATING AND COOLING EQUIPMENT
    UL 923 : 7 MICROWAVE COOKING APPLIANCES
    UL 263 : 2011 FIRE TESTS OF BUILDING CONSTRUCTION AND MATERIALS
    ASME A112.3.4 : 2013 PLUMBING FIXTURES WITH PUMPED WASTE AND MACERATING TOILET SYSTEMS
    CSA 1.6 : 2015 OUTDOOR COOKING GAS APPLIANCES
    ASME B16.22 : 2013 WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS
    ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
    CSA LC 3 : 2000(R2005) APPLIANCE STANDS AND DRAIN PANS
    UL 181A : 4 CLOSURE SYSTEMS FOR USE WITH RIGID AIR DUCTS
    ASSE 1008 : 2006 PLUMBING ASPECTS OF RESIDENTIAL FOOD WASTE DISPOSER UNITS
    APSP 3 : 2014 PERMANENTLY INSTALLED RESIDENTIAL SPAS AND SWIM SPAS
    UL 1777 : 5 CHIMNEY LINERS
    ICC 2012 INT. PROPERTY MAINT. CODE : 2012 INTERNATIONAL PROPERTY MAINTENANCE CODE
    ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
    ASTM D 6754 : 2002 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
    ASTM F 437 : 2015 : REDLINE Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    ASSE 1020 : 2004 ERRATA 2008 PERFORMANCE REQUIREMENTS FOR PRESSURE VACUUM BREAKER ASSEMBLY
    ASME A112.19.1M : 1994 ENAMELED CAST IRON PLUMBING FIXTURES
    ASME B36.10M : 2015 WELDED AND SEAMLESS WROUGHT STEEL PIPE
    NFPA 211 : 2016 CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES
    ISO 15874-5:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
    ANSI Z21.5.1 : 2016 GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS
    ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity
    AHA A135.5 : 2012 PREFINISHED HARDBOARD PANELING
    ASTM D 2822 : 2005 Standard Specification for Asphalt Roof Cement, Asbestos Containing
    CSA B182.6 : 2011 GEN INS 1 11 PROFILE POLYETHYLENE (PE) SEWER PIPE AND FITTINGS FOR LEAK-PROOF SEWER APPLICATIONS
    CSA B137.5 : 2009 GEN INS 1 11 CROSSLINKED POLYETHYLENE (PEX) TUBING SYSTEMS FOR PRESSURE APPLICATIONS
    ANSI Z21.24 : 2015 CONNECTORS FOR GAS APPLIANCES
    FM 4880 : 2017 EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS
    NFPA 13D : 2016 INSTALLATION OF SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES
    ASTM D 1869 : 2015 : REDLINE Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe
    ASTM D 3035 : 2015 : REDLINE Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
    ASSE 1048 : 2011 PERFORMANCE REQUIREMENTS FOR DOUBLE CHECK DETECTOR FIRE PROTECTION BACKFLOW PREVENTION ASSEMBLIES
    ANSI Z21.83 : 0 FUEL CELL POWER PLANTS
    ASTM E 2178 : 2013 : REDLINE Standard Test Method for Air Permeance of Building Materials
    AAMA 450 : 2010 VOLUNTARY PERFORMANCE RATING METHOD FOR MULLED FENESTRATION ASSEMBLIES
    ASSE 1013 : 2011 PERFORMANCE REQUIREMENTS FOR REDUCED PRESSURE PRINCIPLE BACKFLOW PREVENTERS AND REDUCED PRESSURE PRINCIPLE FIRE PROTECTION BACKFLOW PREVENTERS
    UL 55A : 2013 MATERIALS FOR BUILT-UP ROOF COVERINGS
    ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 INTERNATIONAL FUEL GAS CODE
    ICC 2012 INT. ENERGY CONSV. CODE : 2012 INTERNATIONAL ENERGY CONSERVATION CODE
    UL 2523 : 2 SOLID FUEL-FIRED HYDRONIC HEATING APPLIANCES, WATER HEATERS, AND BOILERS
    CSA 2.3 : 2016 GAS-FIRED CENTRAL FURNACES
    UL 1482 : 7 SOLID-FUEL TYPE ROOM HEATERS
    CSA B137.6 : 2009 GEN INS 1 11 CHLORINATED POLYVINYLCHLORIDE (CPVC) PIPE, TUBING, AND FITTINGS FOR HOT- AND COLD-WATER DISTRIBUTION SYSTEMS
    UL 1715 : 3 FIRE TEST OF INTERIOR FINISH MATERIAL
    HPVA HP 1 : 2016 HARDWOOD AND DECORATIVE PLYWOOD
    ASSE 1017 : 2009 PERFORMANCE REQUIREMENTS FOR TEMPERATURE ACTUATED MIXING VALVES FOR HOT WATER DISTRIBUTION SYSTEMS
    ASTM D 2447 : 2003 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)
    ASCE 32 01 : 2001 DESIGN AND CONSTRUCTION OF FROST-PROTECTED SHALLOW FOUNDATIONS
    ASTM D 1784 : 2011 : REDLINE Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
    ANSI LC 1 : 2016 FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING
    MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
    ASME A112.19.3-2017/CSA B45.4-17 Stainless steel plumbing fixtures
    ANSI Z124.6 : 2007 PLASTIC SINKS
    ANSI Z83.8 : 2016 GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES
    ASTM D 1693 : 2015 : REDLINE Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
    ASSE 1016 : 2017 PERFORMANCE REQUIREMENTS FOR AUTOMATIC COMPENSATING VALVES FOR INDIVIDUAL SHOWERS AND TUB/SHOWER COMBINATIONS
    ASTM C 954 : 2015-06 SPECIFICATION FOR STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 MM) TO 0.112 IN. (2.84 MM) IN THICKNESS
    CSA B64.4.1 : 2011 BACKFLOW PREVENTERS, REDUCED PRESSURE PRINCIPLE TYPE FOR FIRE SYSTEMS (RPF)
    UL 180 : 8 LIQUID-LEVEL GAUGES FOR OIL BURNER FUELS AND OTHER COMBUSTIBLE LIQUIDS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective